Protective Guards HONDA CB500X

Fits 2013-2021 HONDA CB500X

Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware 
  
• Developed for on and off-road use
  
• The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
  
• Cutouts allow access to common service points without the need for removal of skid plate

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions

*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock which pushed a slider mounting bolt into the engine case and cracked the case.

2013-2020 Skid Plate Installation Guide

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect the vulnerable plastic rear brake fluid reservoir with this burly stainless steel guard and prevent potential disaster from a simple tip over in the desert or rocky trail!

Easy install with common hand tools.  

Choose your correct model below:

• Models: 2014 - 2018
• Models: 2019 - 2021 (Shown in photos)

Available in natural stainless finish or satin black powder coat. 

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Crash Bar Set HONDA CB500X

Choose between:

• HONDA CB500X 2014 - 2018 (Black or Silver)
  
• HONDA CB500X 2019 - 2021 (Black or Silver) 
  

• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• CNC Laser cut bracketry and mounts for a precise fit
  
•  Sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
  

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over.  If you do happen to scratch one up, you can easily remove it and install a freshie!

Price is per replacement pad. (order 1 pad, get 1 pad)

Fits HONDA CB500X 2013-2021

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Product instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD 2019-2021 HONDA CB500X
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

Installation instructions can be downloaded here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits 2019-2021 HONDA CB500X

Protect the vulnerable turn signals from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 1/8" (3mm)  stainless. 

• Easy 5-minute install using the stock fasteners and common hand tools.
• Choose between natural silver stainless or satin black powder coat finishes. 
• Sold as a pair

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits HONDA CB500X 2019-2021 

Protect the vulnerable ABS Sensors from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 1/8" (3mm)  stainless. 

• Kit includes front and rear guards.
• Easy 5-minute install using the stock fasteners and common hand tools.
• Available in natural silver stainless or satin black powder coat finishes. 

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD fits 2016-2018 HONDA CB500X
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Developed for on and off-road use

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.