SRC DESIGNS GPS bracket bar 2016-2023 HONDA CB500X
Available in Satin finish stainless steel silver or satin black powder coat.
The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your bike. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.
The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware
Developed for on and off-road use
The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
Compatible & will fit withSRC, Hepco & BeckerandSW Motech upper & lower lower crash bars
Please note SRC skid plate is not compatible with the GIVI lower crash bars
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions.
*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock that pushed a slider mounting bolt into the engine case and cracked the case.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Radiator Guards HONDA CB500X
H-CB500X-02-02
Regular price
$68.00
Save $-68.00
Overstock reduction Sale!
Fits HONDA CB500X 2013-2023
Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris. - This protector made of stainless steel sheet 304 grade 1.5 mm thickness - Can be easily mounted in a few minutes with common hand tools
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount for GoPro and other POV cameras
DD-GM-BK/GY-2
Regular price
$49.95
Save $-49.95
The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!
Dango Designs Gripper Mount Features:
Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.
Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Kriega US-30 Drypack Soft Luggage
KUSC30
Regular price
$219.00
Save $-219.00
Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
Kriega US-30 Drypack
The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.
Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.
The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.
Features:
100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
Acetal ITW Airloc buckles
YKK water-resistant zips
6061-T6 alloy fitting hooks
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
1 x set US Alloy Hook Straps included
10-year guarantee
30-liter capacity
445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)
HEADLIGHT GUARD 2016-2018 HONDA CB500X (D)
H-CB17-01-02
Regular price
$118.00
Sale price
$56.00
Save $62.00
CLOSEOUT SALE!
HEADLIGHT GUARD fits 2016-2018 HONDA CB500X - Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat - Developed for on and off-road use
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
HEADLIGHT GUARD 2019-2023 HONDA CB500X
H-CB19-01-01-SL
Regular price
$128.00
Save $-128.00
HEADLIGHT GUARD 2019-2023 HONDA CB500X - Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat - Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning - Developed for on and off-road use
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Regular price
$7.95
Save $-7.95
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Side Stand/Kickstand Foot Enlarger CB500X & NX500
H-CB500X-14-01-SL
Regular price
$42.00
Save $-42.00
Overstock Reduction Sale!
Fits 2013-2025 Honda CB500X & NX500
Keeps your side stand from sinking into the soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega US-20 Drypack Soft Luggage
KUSC20
Regular price
$195.00
Sale price
$188.00
Save $7.00
Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.
Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.
The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.
OS-18 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs.
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
The 100% waterproof roll-top closure(removable white liner) guarantees pack contents remain protected from the elements.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.
A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-18 a very versatile pack.
The four Integrated loops on the base of each pack are designed to:
Mount directly to most rear racks
Mount directly to pannier frames
DIMENSIONS 380(h) x 250(w) x 190(d) mm 14.9(h) x 9.8(w) x 7.5(d) ins.
CAPACITY 18 Litres -1100 cu in
WEIGHT 1000g - 35oz
Kriega Cam Straps
KACS150
Regular price
$22.50
Save $-22.50
KRIEGA LUGGAGE CAM STRAPS
A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.
Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.
1.5M (5ft) long, high quality 1" webbing
Low weight - 1.7oz / 50g per strap
WEIGHT: 3.5oz - 100g
SRC MOTO Gift Card!
Regular price
$25.00
Save $-25.00
Unsure of what awesome moto accessories to give your favorite adventure rider? SRC MOTO is now offering gift cards! You can choose from several different card values, or if you don't see one you want, just contact us at info@srcmoto.com and we will create it for you.
SRC MOTO Gift Cards have no expiration date and can be redeemed at either of our online stores (Or if you catch us at an event!):
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Kriega OS-STRAPS
KOSS
Regular price
$55.00
Save $-55.00
OS-STRAPS (pair)
Kriega OS-Straps
Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.
Features:
Aluminum end hooks
Nylon strapping
Hypalon anti-marring tabs
Sold as a pair
Kriega Subframe Loop Straps
KASLB4
Regular price
$14.00
Save $-14.00
SUBFRAME LOOP STRAPS
Provides a strong hook-on location to mount OS-ADVENTURE PACKS or US-DRYPACKS to most types of bike.
Get an extra set so you can quickly move your US Drypacsk to another bike etc.
Simply thread around the bike subframe and back through the buckle.
4 x 500mm (20") lengths of webbing with loop and buckle at one end.
NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit.
WEIGHT 50g
Kriega US-DRYPACK HOOK STRAP SET
KAMBS
Regular price
$39.00
Save $-39.00
OS-STRAPS (pair)
Kriega OS-Straps
Fit: Upgrade alloy hooks for (pre-2012) US-10 and US-20 tailpacks or replacement fitting set for US-10, US-20 & US-30 DRYPACKS.
FEATURES
Hook: Upgrade alloy hook straps for older generation US-10 and 20 packs (standard on post 2012 product). Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.
Fitting: NB - Some bikes already have web loops attached to the seat-pad/base. In this case we still recommend the fitting of the Kriega loops, as fitting to the subframe is far stronger than to the seat.
Remove bike seat and locate the best mounting areas on the rear subframe. It may be necessary to slot the internal plastic tray if no subframe metalwork is exposed. Attach the 4x 20mm web loops securely to high strength areas of the frame. The 20mm loops are adjustable in length. Final adjustments should be carried out with the seat/pad fitted. Once set, the web must be threaded back through the adjuster to lock-off the webbing. See the threading diagram on this page. To fit the US-pack, hook on the web loop, attach the top quick-release buckle and cinch down the bag on to the bike. Always use the 2 x strap keepers on the web to manage the loose ends. Please also ensure that the quick-release buckles are correctly 'clicked'
TECH-SPECS
Custom 6061-T6 alloy hooks
Multi-position: inline or across bike seat
Easy on/off bike
No loose straps left on bike
Std. strap length 600mm
4 x Acetal ITW Airloc buckles
4 x 20mm sub-frame loops
10-year guarantee
WEIGHT: 200.00 Grams
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Wide Foot Peg Adaptors for Honda CB500X & NX500
H-CB500X-18-01-SL
Regular price
$68.00
Save $-68.00
Fits: 2012-2025 HONDA CB500X & NX500
Kit includes a pair of wide peg adapters
If you've never run a wider high-quality footpeg, you will be pleasantly surprised by the improvement this inexpensive and easy to install upgrade will make! Upgrading to a wider platform footpeg makes a dramatic improvement in comfort as well as greatly improving grip in wet muddy conditions. Our peg adaptors are a great value and easy to install.
It only takes about 10 minutes to install with common hand tools. The additional width and aggressive tooth profile offer about more contact surface to reduce foot arch strain and improve grip. The wide platform and increased contact points will improve rider confidence in sketchy situations!
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander OS-6 ADVENTURE PACK
KOS6
Regular price
$104.00
Save $-104.00
OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.
The 100% waterproof roll-top closure(removable white liner) guarantees pack contents remain protected from the elements.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.
A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.
The four Integrated loops on the base of each pack are designed to:
Mount directly to most rear racks
Mount to an OS-BASE as a side pannier or tail pack
Mount as a tail pack with Kriega OS RACK LOOPS
Hook on to an OS-32 pannier (front, rear or top)
Mount directly to most front crash bars
Mount as a tank bag with Kriega TANKor SUBFRAME LOOPS
An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)
TECH SPEC
DIMENSIONS
320(h) x 200(w) x 90(d) mm
12.5(h) x 7.9(w) x 3.5(d) ins.
CAPACITY: 6 Litres - 366 cu in
WEIGHT: 550g - 19.4 oz
SRC Replacement Crash Bar Pads
P-PK-01-01
Regular price
$19.00
Save $-19.00
SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over. If you do happen to scratch one up, you can easily remove it and install a freshie!
These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter.
Please Note: These are not solid frame sliders. Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.
Price is per replacement pad. (order 1 pad, get 1 pad)
Eagle Grit Hand Cleaner - 12 ounces
NB16
Regular price
$8.95
Save $-8.95
Work Hard. Clean Up Right. American Made.
Eagle Grit's industrial-strength hand cleaner starts with their micro-scrubbing formulas, created from scratch through their very own recipes. Then mass-produced in their warehouse, each batch is sent over to their distribution center in drums where each bottle is hand-pumped, labeled and packed. Case by case, day by day, truck by truck, Eagle Grit's passion-filled product makes its way down the roads like veins to the heart of the land.
All Natural:
Detergent based formula - no solvents or pumice.
Drain friendly product and recyclable container!
The Grit:
Removes virtually all substances, kills odor, moisturizes and repairs all without irritation.
Kriega Rally Pack
KRR25
Regular price
$88.00
Save $-88.00
FEATURES
Pack
100% waterproof bolt-on waterproof fender pack made from 1000D Cordura. 2.5L (150 cu in) capacity – ideal for safety equipment, small tools, dry gloves, etc. Innovative ‘flush’ alloy fasteners included (see fitting).
Base
Ultra-tough Rhinotek fabric on base with 4 x heavy-duty rivets. All fasteners for dirtbike fender are included (see fitting). Pack also has a removable(hook and loop) waterproof liner for cleaning or replacement.
Fitting
Remove the white liner (hook and loop, top edge) and remove the bag from the packaging. Included with the Rally pack are 4 x alloy/stainless fasteners with nylon spacer washers. The product packaging is designed to used as a drilling guide.
Line up the guide on the rear fender and drill 4 x 6mm diameter holes. Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam). Tighten anti-clockwise and always use thread lock. Allow 24 hours to dry.
TECH-SPECS
2.5-litre (150 cu in) capacity
100% waterproof
Hook and loop closure strap
4 x CNC 6061-T6 alloy fasteners
4 x Stainless steel fasteners
1000D Cordura
RHINOTEK: abrasion-resistant fabric
DRY PACK: taped-seam liner
10-year guarantee
DIMENSIONS
200(h) x 175(w) x 70(d) mm
7.9(h) x 6.9(w) x 2.7(d) ins.
WEIGHT
300 Grams
KRIEGA US-DRYPACK HOOK STRAP (Single)
KAMBS1S
Regular price
$16.00
Save $-16.00
Kriega US Alloy Hook Strap
The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.
Features:
1 x quick-release strap with alloy buckle
Custom 6061-T6 CNC-milled aircraft grade alloy
Easy on/off
600mm
Does not include subframe loop
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega US-10 Drypack Soft Luggage
KUSC10
Regular price
$132.50
Save $-132.50
Kriega US-10 Drypack
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.
The US-10 Drypack provides 10 liters of storage for those keep-dry essentials. Ideal for a full day on the bike when you may need to carry waterproofs, spares gloves or a tool kit.
FEATURES
Guaranteed 100% waterproof roll-top closure main compartment.
Universal-fit to any type of motorcycle.
Mount inline or across the seat / rear rack
Easy to fit with quick-release hooks attaching to web loops secured to the bike’s subframe.
Use individually or hook-on additional US-Drypacks to build your ideal luggage system up to 70 litres.
Side pocket and rear mesh pocket provide additional quick-access storage.
Use as a tank bag, with the addition of a Kriega TANK Converter.(Sold Separately)
Hook-on to most Kriega Back packs for additional waterproof storage. excluding Max28, Hydro-2
DIMENSIONS 330(h) x 240(w) x 120(d)mm 13”(h) x 9.4”(w) x 4.7”(d)
VOLUME 10-Litres (600cu in) capacity
WEIGHT 500g / 17.6oz
SRC Staff Crew Neck T-Shirts
DM130L-SRCSS-W-S-BLK
Regular price
$25.00
Save $-25.00
Congratulations, you found our shirts!
We made these logo t-shirts for our staff and based on requests for SRC apparel, we thought customers might like them too. You can even tell people you are employed here but, if you show up wearing one at BackFire Station we might give you a nametag and put you to work.
*Note our current batch of shirts does not have the USA Flag on the sleeve, as pictured.
Perfect weight, wrinkle-free, ring spun soft fabric great for casual wear and comfortable under your gear while riding, wrenching, or doing all the above.
Available in white or black. Sizing listed below.
4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
1x1 rib knit neck
Tear-away label
Shoulder to shoulder taping
Men's sizes (chest size):
M 38-40"
L 41-43"
XL 44-46"
XXL 47-49
Women's sizes (chest size):
S 25-26"
M 37-38"
L 39-41"
XL 42-44"
XXL 45-47
Care Instructions
Machine wash cold with like colors. Only non-chlorine bleach. Tumble dry low. Warm iron if necessary
Rear Cargo Tail Rack HONDA CB500X & NX500
H-CB500X-04-02-NEW
Regular price
$218.00
Save $-218.00
Fits 2012-2025 HONDA CB500X & NX500
Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your CB500X!
This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe. You can safely carry up to 35 lbs (16 Kg's) with this rack system.
Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long.
No drilling or modifications required, easily mounts in under an hour with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA OS-Bottle Holder
KOSBOT
Regular price
$72.00
Save $-72.00
OS-BOTTLE
The OS-Bottle is a versatile heavy-duty bottle holder. Hook-on to an OS-PANNIER, US-DRYPACK or TANK and you have easy access to 2 x 1 litre drink or fuel bottles. Max bottle size 80mm dia x 280mm long (3˝x 11˝)
FEATURES
• Ultra-tough Hypalon construction • Draw-string and compression strap retainer • Aircraft grade alloy buckles • Heavy-duty Acetal cam buckles • 10 YEAR GUARANTEE
TECH SPECS
DIMENSIONS
250(h) x 180(w) x 60(d) mm
8.2(h) x 6(w) x 2.3(d) ins.
WEIGHT: 375g - 13.2 oz
Backfire station water bottle
BF_Bottle
Regular price
$30.00
Save $-30.00
Custom Liberty insulated water bottle (20oz) designed by SRC Team Member Caryn.
Topo graphics showing the region around Pendleton and some of our favorite riding spots!
What is Backfire Station? Check out our Blog for a behind-the-scenes peak.
Available electropolished 304 stainless steel silver or satin black powder coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Save $-129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Roam Tool Tube
RSDRKTR-BB
Regular price
$135.00
Sale price
$108.00
Save $27.00
OVERSTOCK SALE!
ROAM TOOL ROLL
The Roland Sands Design X Kriega Roam Tool Roll is an indispensable piece of kit on any road trip. Store in your luggage or mount to the bike with the Velcro® Molle system, it’s a haven for your tools and spares. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough Hypalon reinforcement, the blend of Classic and Modern materials with a technical twist. Unclip and roll-out to reveal four YKK® zip access pockets, 10 elastic loops, and a T6 alloy rail with 8 x 3/8" clips for socket management. Additional 1/4” and 1/2” socket rails can also be added. (sold separately)
Available in 2 color options: Black or Ranger.
Features:
• RSD waxed cotton and 1000D Cordura® construction
• 4 x 1-litre pockets with oversized YKK zips.
• 10 x elastic loops
• 6061-T6 alloy socket rail with 8 x 3/8" clips
• Optional 1/4" and 1/2" socket rails
• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps