Protective Guards

The Rally Dual LED headlamp assembly is really cool. It's also $654 to replace......

Protect it from impact damage with the SRC Designs Headlamp guard kit. Laser-cut 14 gauge steel powder coated satin black provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. 

Available in powder coated black or stainless steel (silver)

Fits Honda CRF 250L Rally & 300L Rally 2017-2025

Installation video here.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Brake Master Cylinder Guard Honda 300L & Rally 

Fits: 2021 -2025 Honda 300L & Rally

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Easy install with common hand tools.  

Available in natural stainless finish or satin black powder coat. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your 2021-2026 300L's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate. 

• Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware 
• Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in both Silver Aluminum and Satin Black Powder Coat options

Installation instructions

The 300L Rally skid plate/Crashbar combo is available here. 

The 300L skidplate can be installed on the 300L Rally models by removing/trimming the bodywork plastics. 

Here's a link to a video of the process by a friend of ours. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

2025 Rally models have new wider bodywork. We have confirmed that our crash bars with integrated skid plate do fit! 

Product instructions located here

Protect your 300L Rally's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's innovative heavy-duty skid plate/crash bar combo! 

The innovative desing features an integrated aluminum skid plate and is lighter and increases structural integrity over the competitins 2 piece designs. 

In regards to a conventional full upper and lower crash bar set for the Rally, It’s SRC’s opinion that the upper front side fairing mounts aren’t strong enough for a full crash bar set. The only upper attachment point is on the bikes Rally tower frame and any impacts to the crash bar would end up damaging the tower frame structure, so they developed this kit below. Plus in most falls, the end of the handlebar and footpeg hold the bodywork away from the ground. 

To Clarify- 

This kit does not fit the 250L or 250L Rally!

300L model owners: *see detail at the bottom of this page regarding installation on the 300L. 

• Stout 1" (25mm) drawn over mandrel crash bar tube (DOM) with 1/8" (3mm ) wall thickness
• Skid plate is made of 11 gauge ( 1/8" / 3mm) thick  304 aluminum sheet with stainless hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate
• Weight  16.5 lbs / 7.5kg

* We have had inquiries about fitting this kit to the 300L, and it does fit, but be aware that the crash bars are positioned a couple of inches away from the motor to clear the Rally's bodywork. Here are a few photos from a customer that installed them on his new 300L recently.   

SRC Designs Radiator Guard kit fits HONDA CRF 300L (& RALLY) 2021-2025 models

Laser-cut 2 mm thick Stainless steel and symmetrical honey-comb design provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. 

Available in powder coat black or natural silver

Product instructions located HERE

Installation video:  For 300L Below

Installation Video for 300L Rally Below 

2025 Rally Install shown below

•  Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
  

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over.  If you do happen to scratch one up, you can easily remove it and install a freshie!

These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter. 

 Please Note: These are not solid frame sliders.  Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.  

Price is per replacement pad. (order 1 pad, get 1 pad)

Installation PDF 

PLEASE NOTE: This part has been redesigned due to an issue related to the resonant vibration inherent in the KLR.  SRC's new design became available April 12th, 2023. The new design incorporates a fully isolated main mount system using urethane through bushings. 

Protect your KLR's plastics and engine with SRC crash bars.

• Unique design provides full protection of the Upper and Lower engine/body/chassis
• Manufactured out of steel DOM Tubing of 1” diameter and 1.8 mm thickness, and processed in state-of-the-art laser cut machines for cutting, notching and formed by CNC tube bender
• Welded using TIG process and shot blasted to remove all residual stresses, before surface protection process
• Satin Black Electrostatic Powder Coat Finish, provides corrosion resistance to endure all weather conditions
• Kit includes all mounting hardware, bracketry and sacrificial compression molded resin sliders to absorb impact
• Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site
• Compatible with SRC Skid Plate (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)

Fitment for: Kawasaki KLR 650 & KLR 650S 2022-2025*
* The upper light bar on the adventure model does not have to be removed, but the lower engine guards do. 

Here's a nice video (below) from a customer who installed the crash bars and skid plate at the same time.  When installing the SRC crash bars with SRC skid plate, use the brackets and bolts that come with the skid plate as shown in the video below beginning at around the 3:00 minute mark. 

And here's another customer video showing the install of the SRC skid plate and SRC crash bars. It's an older video, so it shows the earlier version of the crash bars that do not have the urethane isolation bushings, but it does have some helpful information. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

ATTENTION!

The upper body work on the 2025 Tenere 700 is slightly wider than previous models.  The lower kits below do fit the 2025.-2026  

 A new full kit   2025 and 2026 models is now available here on our website. 

SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2025* 

2020-2021 full and lower kits are compatible with SRC skid plate.

*2022-2025 models, you can not use the SRC V2 skid plate and lower crash bars. 

PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine. 

Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022.  If you are unsure of how to order, shoot us an email for assistance. 

Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit

Available Electropolished Stainless Steel (SILVER) or Satin Black Powder Coat steel 

Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Compatible with the stock skid plate and most aftermarket skid plates

Choose between:

• Full set (Upper and lower crash bars)
• Upper crash bars only (Lower crash bar can be added later to complete full set)
• Lower crash bars only (Upper crash bar can be added to complete full set)

Product weights:

• Yamaha Tenere 700 SRC Crash Bars (Lower): 7.6 LBS 
• Yamaha Tenere 700 SRC Crash Bars (Upper): 14.8 LBS

Installation instructions  Full set and video

Installation Upper Set

Installation instructions lower bar set

Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars.  This is not rust and is perfectly normal.Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: **If the part you need is out of stock you can place a backorder, the lead times are generally 4 to 6 weeks.  

Available for the  HONDA CRF 250L 2013 to 2020 models

And the CRF 250L Rally & Rally 2017 to 2020 models

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector is made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Available in stainless silver or satin black powder coat 

250L PRODUCT INSTRUCTIONS LOCATED HERE

Rally Instructions here 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your KLR's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

Fitment: Kawasaki KLR 650 2022+2025

• Made of 4mm thick aerospace-grade aluminum sheet with stainless hardware 
• Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for the removal of skid plate
• Compatible with SRC Crash Bars (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)

Available in both Silver Aluminum and Satin Black Powder Coat options

Installation PDF 

Compatible with T-Rex Crash bars with small mod, grind 2 small semi-circle reliefs as shown in the photo below.

Installation video

"

Here's a nice video (below) from a customer who installed the crash bars and skid plate at the same time.  When installing the SRC crash bars with SRC skid plate, use the brackets and bolts that come with the skid plate as shown in the video below beginning at around the 3:00 minute mark.  

And here's another customer video showing the install of the SRC skid plate and SRC crash bars. It's an older video, so it shows the earlier version of the crash bars that do not have the urethane isolation bushings, but it does have some helpful information. 

 * Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs headlamp guard kit fits HONDA CRF 250L & 300L models 2013-2026

Laser-cut 14 gauge steel powder coated satin black provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. 

Available in powder coat black or natural silver

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE / SAVE $50 on the silver finish kits!

Protect your headlight from impact damage with the SRC Designs Headlamp guard kit.

• The Head Light Guard is Laser cut from 2 mm thick Stainless-Steel material
• Compatible hardware and Bracketry for ease of fitment and mounting
• 3. Easy to remove the Head Light Guard from the Grommet mounts for cleaning inside

Available in powder coat black or natural silver

Fitment: Kawasaki KLR 650 2022-2026

Does fit the Adventure model, tight and takes little finagling! But they do fit.  

Installation instructions and video



* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 SRC Designs Head Light Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2019 - 2024.

2025-2026 model is also available on our website.  headlight design 

Available in Brushed Stainless Steel finish or Satin Black Powder coat steel 

• Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens 
• Developed for on or off-road use

Includes all necessary mounting hardware and is easily installed with common hand tools. 

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your very expensive headlight from flying stones & small rocks

Available in ready-to-race orange or classic black powder coat 

• Fits 390 2020-2024
• Fits 790/890 2020 to 2022 
• Laser cut 2mm thick stainless steel 
• Compatible hardware and bracketry for ease of fitment and mounting
• Easy to remove the Head Light Guard for cleaning inside
• Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site

Includes all necessary mounting hardware and is easily installed with common hand tools. 

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE!  

Center Stand Guard for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the underside of your Multistrada from damage with the SRC Center Stand Guard. Easily installed in minutes with common hand tools.  

Constructed of strong yet lightweight Aluminum and processed in state-of-the-art laser cut and CNC bending machines.

Customer input from Troy S. "This skid plate extender is perfect as there was a significant gap in coverage, leaving the rear header pipe completely exposed. This Center Stand Plate covers it giving more assurance I will not destroy the pipe as I surmount large logs, rocks, and berms."

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2019 - 2021*

Does not fit 2022-2023 or models equipped with E5 catalytic converter

Protect your  Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed stainless steel or satin black powder-coat

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: These are special order products. If the part you want is shown in stock, it will ship right away. However, if the part is out of stock (0 quantity), lead times are generally 4 to 6 weeks. For special order parts, please place your order and we will follow up with the current estimated delivery time. 

SRC Radiator Guard Triumph Tiger 900 2020-2025 (sold as a pair) 

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector is made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Available in Stainless Silver or Satin Black Powder Coat 

NOTE: This is a special order product, lead times are generally 4 to 6 weeks. 

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

SRC HEADLIGHT GUARD HONDA NC750

- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

Choose between these options:

• 2012-2015 (Black or Silver)
  
• 2016-2020 (Black or Silver)
  

Link to product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your 450l / RL's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate. 

• Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware 
• Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
• Developed for on and off-road use
• Cutouts allow access to common service points (including access to oil drain plug) without the need for removal of skid plate

Available in both Silver Aluminum and Satin Black Powder Coat options

Fitment includes: 

• 2019-2026 Honda CRF 450L / RLInstall instructions and video

NOTE: These also fit the Honda CRF 300L Rally model as well, however you will need to remove the stock plastic skid plate and lower body work

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE!

Fits: 2014 - 2020 DUCATI MULTISTRADA 950 / 1200 / 1260 

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.

• This protector made from 2 mm thick Stainless steel and Symmetrical Honey-comb design is Laser cut on State-of-the-art machines

• Can be easily mounted in a few minutes with common hand tools on the radiator 

• Available in brushed stainless steel or satin black powder-coat

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: This is a special order product, lead times are generally 4 to 6 weeks.  You can order now and we will follow up with a more precise eta by email. 

Crash Bar Set HONDA NC700 / NC750 - Manual Transmission/6 Speed

• Available electropolished 304 stainless steel silver or satin back powder coat steel
• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness, 5kg/11lbs
• CNC Laser cut bracketry and mounts for a precise fit
• Sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Fitment - this product fits:

• Honda NC700S 2012-2013
• Honda NC700X 2012-2017
  
• Honda NC750X 2016-2021
• Honda NC750X / S 2014-2015
• Honda NC750XD 2020-2021

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Link to Installation Instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs headlamp guard kit fits HONDA CRF 450 RL models 2019-2026

Laser cut from 2mm thick stainless-steel, provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!  

Easy to remove the Head Light Guard for cleaning inside.

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. 

Available in powder coat black or natural silver

Fitment includes: 

• Honda CRF 450L and RL 2019-2026

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

These are made by the same company that makes the AS skid plate. They are from Europe, we gave them a try, but the importing cost was crazy, so we are closing them out.  Nice quality! 

4 mm thick aluminum is substantially lighter than steel plates for deep off-road excursions. Only 5 lbs.

Quality hardware--not the soft fasteners that come with some other brands.

Replaceable nylon slider protectors.

Electrostatic powder-coated for maximum durability, corrosion resistance, and color longevity. 

Product install instructions

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: These are special order products. If the part you want is shown in stock, it will ship right away. However, if the part is out of stock (0 quantity), lead times are generally 4 to 6 weeks. For special order parts, please place your order and we will follow up with the current estimated delivery time. 

SRC Headlight Guard TRIUMPH TIGER  900 2020-2025

- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

NOTE: This is a special order product, lead times are generally 4 to 6 weeks. 

Product Instructions located here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: ORANGE BARS ARE A SPECIAL ORDER PRODUCT - Please email us at info@srcmoto.com for shipping timelines prior to placing order

Fits: KTM 790/890 ADV 2020-2022 

Does not fit 2023+ due to larger and lower fuel tanks 

Protect your KTM 790/890 Adv's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty crash bars & skid plate.

This crash bar is designed to prevent damage from falling, bumps as well

• Full lower crash bars plus skid plate - sold as a set

• Made from 1 ' thick Stainless steel tube 1.8 mm. Cut by modern laser machine and tube bender on CNC machine

• Tube wall thickness 2mm  

• Crash bars also house a 3mm stainless steel plate to protect fuel tank on both sides of the bike

• 4 x Main mounting points on each side of the bike for maximum strength

• Skid plate material - 4mm aircraft grade aluminum plate

• Beautiful and strong connection seams

• Available in powder-coated KTM Orange and electropolished Silver

• The shockproof cover helps to hold the crash bar and reduce impact from falling

• Supplied with all stainless steel brackets & mounting components 

• Easy to assemble, convenient, and fast, there is a manual for installation. And can be downloaded from the SRC website.

Installation instruction video

ENGINE GUARD / Skid Plate FOR BMW G 310GS & BMW 310R 2017-2026

Made of 1/8" ( 3mm) thick  Satin Black Powder Coated or Clear  

• Anodized Aluminum 
• Developed for on and off-road use
• Fits 2017-2026 BMW G310 GS & BMW 310R 
• Easily installed with common hand tools
• Stainless Steel mounting hardware and Installation guide included 
• Cutouts allow access to common service points without the need for removal of skid plate

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Link to product instructions here

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.