Side stand / Kick stand foot enlarger - Yamaha Ténéré 700

Y-T700-14-01-SL

$62.00

SRC Designs Side stand/Kickstand foot enlarger for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2023

Keeps your side stand from sinking into soft ground & hot pavement!

Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

The SRC large side stand base extension (doubles the surface area) installs easily and improves your parking experience when off pavement with your bike.

Made of laser-cut stainless steel sheet 304 grade 3 mm thickness
Stainless bolts and locknuts
Easy installation

Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Side stand / Kick stand foot enlarger - Yamaha Ténéré 700

Gas / Jerry Can

3LJC Warehouse location #C-05-130#

$86.00 $78.00 Save $8.00

MOTO STUFF Fuel/Jerry Can with mount

Rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack. Includes quick release mount and hardware that easily attaches to the SRC rack, which is pre-drilled for this mount.

Can dimensions. 10" tall X 5" thick X 8" wide

PLEASE be aware that purchasing this and a full rack is not the same as purchasing a full rack with gas can kit. You will be missing special hardware to attach the can to the rack. So buy the full rack with gas can if that's what you need.

TACKFORM ENDURO Phone / GPS Mount

TFEN-BIKE

$59.95

TACKFORM ENDURO
The Tackform Enduro Motorcycle Mount is the ultimate phone mounting solution when looking to mount a smartphone on your Motorcycle, Dirt Bike, 4 Wheeler, Quad, Snowmobile, you name it. Made from high strength aluminum and designed to last a lifetime. This motorcycle mount will endure the roughest of terrain while keeping your phone seated securely in the phone cradle. You can easily place or remove the phone with a single hand. Your phone can be mounted in both landscape or portrait mode. The rock solid ball and socket joint allows you to swivel the phone to any desired viewing angle. If you like to go fast and want a mount that will outlast you, you've come to the right place.

Buy it now - Use it forever - Lifetime Guaranteed

COMPATIBILITY
Works seamlessly with all cell phones and devices up to 3.4 inches wide and 5/8" thick. This includes all standard and Plus sized iPhones with or without a protective case. Samsung Galaxy, LG, HTC, you name this motorcycle phone mount will hold it.. Securely.
The beauty of this mount is you're able to get any phone, with any phone case, in and out of the cradle with a single hand. Loaded with dual industrial spring creating a rock steady hold on your cell phone while allowing to easily get the phone in and out of the cradle with a single hand.

INSTALLATION
Installation is a breeze - 2 Minute Installation
The kit comes with 3 custom fittings for 7/8", 1" and 1-1/4" bars (Also, works with 1.31" over-sized road bike or mountain bike Bars.) And fits all SRC GPS Bars
1. Simply place the appropriate spacer over the bar. Connect the clamp with the included wrench and two screws.
2. Loosen the ball and socket joint and position the phone into the desired position. Lock into place.
3. From here you will be able to easily place and remove your phone from the mount with a single hand.
Ride off into the sunset...

TACKFORM ENDURO Overview

Installation Overview below

DANGO Gripper Mount for GoPro and other POV cameras

DD-GM-BK/GY-1

$49.95

The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

Compatible with Dango Design Gripper Mount and other action camera mounts
- All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included

Hardware Included in add on accessory adapter kit*

20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

DANGO Gripper Mount for GoPro and other POV cameras

DANGO Gripper Mount Accessory adaptor/extension kit

DD-GM-BK/GY/AK

$7.95

Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

Compatible with Dango Design Gripper Mount and other action camera mounts
- All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included

Hardware Included in add on accessory adapter kit*

20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

DANGO Gripper Mount Accessory adaptor/extension kit

Hippo Hands

BACKCOUNTRY

$129.95

Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.

Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.

Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.

Choose from three different models to suit your type of riding and motorcycle:

Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep

Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!

Rouge - Mid-sized motorcycle hand covers - 10.5" Deep

Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.

Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure

The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.

Sold in pairs

Your bike must have hand or brush guards installed to fit properly.

View product video instructions here:

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Acerbis Rally Pro X-Strong Handguards

2142000001

$104.95 $94.00 Save $10.95

The Rally Pro X-Strong is a durable injection-molded Nylon composite handguard that features an anodized aluminum bar for ultimate protection. It includes an indexed steel bar-end insert that mounts solidly and will not allow the guard to rotate in a crash. The included X-Strong mount kit allows the protection to be mounted to the handlebar with plenty of room for cables and brake lines. Optional spoilers are sold separately.

This is a universal part that fits most adventure motorcycles: Please note that some models with adjustable windscreens may need to have the windscreen in the forward-most location, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

PLEASE NOTE: Some OEM bars will require the removal of weighted bar ends and possibly other minor modifications to install handguards.

For example-

We don't advise installing on the stock handlebars as the stock bars are super soft and usually get bent on the first drop.

On the HONDA CRF 250L and 300L including Rallys, there are a few mods needed to run aftermarket bars, mainly grinding off the locating tabs on the turn signal and start button housings. And you will need to use some stainless steel tape to increase the diameter of the bar surface where these housings clamp. And we. usually sand or file off the throttle housing tube ridges so you can't feel them after installing new grips.

Choose from black, white or red colors.

View product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Steel Core Straps

SSB-4.5

$34.00

STEELCORE STRAPS

Love it • Lock It

Quality: Steelcore straps have a braided 7/19 galvanized steel cable at the center covered in a cut-resistant, heavy-weight webbing made of a proprietary blend of steel and fibers. The Straps have an aircraft grade aluminum buckle assembly that is powder coated for corrosion resistance. Our locks are custom-made using double butted key and pick-resistant design.

Innovation: Steelcore is committed to being on the cutting edge of innovation and product development. We will continue to explore opportunities to improve our products and create value for our customers.

Kriega Rally Pack

KRR25

$87.50

FEATURES

Pack

100% waterproof bolt-on waterproof fender pack made from 1000D Cordura. 2.5L (150 cu in) capacity – ideal for safety equipment, small tools, dry gloves, etc. Innovative ‘flush’ alloy fasteners included (see fitting).

Base

Ultra-tough Rhinotek fabric on base with 4 x heavy-duty rivets. All fasteners for dirtbike fender are included (see fitting). Pack also has a removable(hook and loop) waterproof liner for cleaning or replacement.

Fitting

Remove the white liner (hook and loop, top edge) and remove the bag from the packaging. Included with the Rally pack are 4 x alloy/stainless fasteners with nylon spacer washers. The product packaging is designed to used as a drilling guide.

Line up the guide on the rear fender and drill 4 x 6mm diameter holes. Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam). Tighten anti-clockwise and always use thread lock. Allow 24 hours to dry.

TECH-SPECS

2.5-litre (150 cu in) capacity
100% waterproof
Hook and loop closure strap
4 x CNC 6061-T6 alloy fasteners
4 x Stainless steel fasteners
1000D Cordura
RHINOTEK: abrasion-resistant fabric
DRY PACK: taped-seam liner
10-year guarantee

DIMENSIONS

200(h) x 175(w) x 70(d) mm
7.9(h) x 6.9(w) x 2.7(d) ins.

WEIGHT

300 Grams

Kriega Overlander OS-6 ADVENTURE PACK

KOS6

$105.00

OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

Mount directly to most rear racks
Mount to an OS-BASE as a side pannier or tail pack
Mount as a tail pack with Kriega OS RACK LOOPS
Hook on to an OS-32 pannier (front, rear or top)
Mount directly to most front crash bars
Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

320(h) x 200(w) x 90(d) mm
12.5(h) x 7.9(w) x 3.5(d) ins.

CAPACITY: 6 Litres - 366 cu in

WEIGHT: 550g - 19.4 oz

Kriega Overlander OS-12 ADVENTURE PACK

KOS12

$129.00

OS-12 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-12 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

Mount directly to most rear racks
Mount to an OS-BASE as a side pannier or tail pack
Mount as a tail pack with Kriega OS RACK LOOPS
Hook on to an OS-32 pannier (front, rear or top)
Mount directly to most front crash bars
Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

360(h) x 200(w) x 160(d) mm
14.2(h) x 7.9(w) x 6.3(d) ins.

CAPACITY: 12 Litres -732 cu in

WEIGHT: 850g - 30 oz

Kriega Overlander-S OS-18 Drypack Soft Luggage

KOS18

$149.00

OS-18 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs.

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-18 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

Mount directly to most rear racks
Mount directly to pannier frames

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

Kriega Overlander-S OS-18 Drypack Soft Luggage

Kriega Overlander-S OS-22 Drypack Soft Luggage

KOS22

$319.00

Kriega Overlander-S OS22 Drypack

DIMENSIONS
400(h) x 420(w) x 150(d) mm
15.7”(h) x 16.5”(w) x 5.9”(d)

(sold each, rigid platform mounts shown sold separately)

The OS-22 Soft Pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.

The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.

Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick-release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.

Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS STRAPS or as a single pannier by hooking-on to a specially designed OS Platform base.
(both sold separately and available here on our site)

FEATURES

The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.

A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS Shoulder Strap can be hooked on to convert to a shoulder bag.

A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.

Hi-Vis details front and rear add an extra safety element for low light riding.

TECH-SPECS

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

WEIGHT
2600g - 91.7oz

VOLUME
22 litres (1340cu in)

FITTING OPTIONS

The OS-22 requires pannier frames to be fitted to the bike.
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.

Once fitted there are 2 options to fit the OS-22
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform. Available here on our website.

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

Kriega Overlander-S OS-22 Drypack Soft Luggage

Kriega Overlander-S OS-32 Drypack Soft Luggage

KOS32

$345.00

Kriega Overlander-S OS32 Drypack

Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)

(sold each, rigid platform mounts shown sold separately)

The Overlander-S series of roll-top, 100% waterproof bags feature semi-rigid walls for easy loading and shape retention. The OS-32 bags are intended as foundation saddlebags that readily accept the smaller bags within the series as modular tethers of supplemental storage. All OS-PACKS are 100% waterproof and constructed from ultra-abrasion resistant Hypalon and 1000D Cordura nylon that is ready to deal with the toughest of adventures.

Features:

100% waterproof construction
Semi-rigid wall panels retain shape when empty
Ultra-abrasion resistant Hypalon strapping
1000D Cordura nylon body construction
32 liter capacity ea.
Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
Sold each

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

FITTING OPTIONS

The OS-32 requires pannier frames to be fitted to the bike.
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.

Once fitted there are 2 options to fit the OS-32
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. Available here on our website.

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

Kriega Overlander-S OS-32 Drypack Soft Luggage

Kriega US-10 Drypack Soft Luggage

KUSC10

$132.50

Kriega US-10 Drypack

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.

The US-10 Drypack provides 10 liters of storage for those keep-dry essentials. Ideal for a full day on the bike when you may need to carry waterproofs, spares gloves or a tool kit.

FEATURES

Guaranteed 100% waterproof roll-top closure main compartment.
Universal-fit to any type of motorcycle.
Mount inline or across the seat / rear rack
Easy to fit with quick-release hooks attaching to web loops secured to the bike’s subframe.
Use individually or hook-on additional US-Drypacks to build your ideal luggage system up to 70 litres.
Side pocket and rear mesh pocket provide additional quick-access storage.
Use as a tank bag, with the addition of a Kriega TANK Converter. (Sold Separately)
Hook-on to most Kriega Back packs for additional waterproof storage.
excluding Max28, Hydro-2

Kriega US-20 Drypack Soft Luggage

KUSC20

$189.00

Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.

Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.

The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.

Kriega US-20 dry pack features:

100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
420D nylon ripstop - lightweight yet extremely strong
6061-T6 alloy fitting hooks
Acetal ITW Airloc quick-release buckles
YKK water-resistant zip on side pocket
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
US Alloy Hook Straps included
10-year guarantee
20-liter capacity
15.7" H x 10.2" W x 7.5" D

Kriega US-30 Drypack Soft Luggage

KUSC30

$219.00

Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

Kriega US-30 Drypack

The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.

Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.

Features:

100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
Acetal ITW Airloc buckles
YKK water-resistant zips
6061-T6 alloy fitting hooks
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
1 x set US Alloy Hook Straps included
10-year guarantee
30-liter capacity
445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)

KRIEGA TRAIL9 ADVENTURE BACKPACK

KRUT9-L lime

$179.00

TRAIL9 ADVENTURE BACKPACK

A compact dual-sport/adventure backpack the TRAIL9 has the perfect combination of a 4-litre waterproof roll-top main body and a separate 5-litre zip-access hydration compartment, with the choice of three compatible hydration reservoir sizes available (sold separately).

FEATURES

QUADLOC-Lite™ Harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort, even with heavy loads.
Ultra-durable 420D Cordura® Lite Plus and Hypalon construction.
Air-mesh back panel for rider comfort.
YKK water-resistant zip.
Guaranteed waterproof 4-litre main pack body.
5-litre zip compartment.
2L, 3L and 3.75L hydration reservoir compatible (sold separately).
External Hypalon net with elastic cord adds useful extra storage.
Removable waist strap for extra pack stability when riding.
Reflective panels on the harness give added visibility.
Harness pocket compatible.
Formed-web carry handle
Available in Black, Lime or Orange
10 YEAR GUARANTEE

DIMENSIONS: 400(h) x 210(w) x 130(d)mm / 15.7(h) x 8.26(w) x 5.1(d)ins

VOLUME: 9-litres (550cu in) total capacity.

WEIGHT: 1030g / 36oz

KRIEGA TRAIL18 ADVENTURE BACKPACK

KRUT18-O orange

$239.00

TRAIL18 ADVENTURE BACKPACK

All-weather adventure touring demands robust, reliable equipment. The TRAIL18 Adventure Backpack utilizes Kriega’s groundbreaking Quadloc-Lite™ harness, combined with high-tech construction materials to meet the needs of the adventure rider.

Composed of three sections: A heavy-duty zip access 7-litre rear compartment which is a perfect storage area for a Tool-Roll and water bottle or the optional 3.75L Hydration Reservoir. This area also has a small internal waterproof pocket for a phone and wallet, combined with the main roll-top body providing a total of 12-litres 100% waterproof storage. The innovative Hypalon net also provides more external storage for wet gear.

FEATURES

QUADLOC-Lite™ harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort, even with heavy loads.
Ultra-durable 420D Cordura® Lite Plus and Hypalon construction.
Air-mesh back panel for rider comfort.
YKK® heavy-duty zips throughout.
100% waterproof 11-litre main pack body.
7-litre heavy-duty zip access compartment.
100% waterproof 1-litre internal pocket.
Internal zip pocket with key clip.
2L and 3.75L hydration reservoir compatible (sold separately).
External Hypalon net with elastic cord adds useful extra storage.
Removable waist strap for extra pack stability when riding.
Reflective panels on the harness give added visibility.
Harness pocket compatible.
Semi-rigid carry handle
Available in Black, Lime or Orange
10 YEAR GUARANTEE

DIMENSIONS: 445(h) x 250(w) x 170(d)mm / 17.5”(h) x 9.8”(w) x 6.7”(d)

VOLUME: 18-Litres (1100cu in) total capacity

WEIGHT: 1630g / 57oz

KRIEGA R-20 Back Pack

KRU20

$179.00

THE VERSATILE ‘ACTIVE’ PACK FOR ROAD AND TRAIL

We love our R20's, they have a nice body-hugging contoured design that looks sharp and feel great. And the Quad-Loc harness system does a great job of distributing the load taking the stress off your shoulders that is so common on conventional backpack designs. It's the perfect size for day trips or for an extra 20L of storage on your longer adventures. Although KRIEGA doesn't describe it as waterproof, we've never had any issues of our gear getting wet while riding in the rainy winters up here in the NW.

The Kriega R20 motorcycle backpack is an ‘active’ riding pack with Kriega's unique QUADLOC-lite harness system. The harness is angled away from underarms for total freedom of movement and is exceptionally easy to use with none of the harness re-adjustment necessary on conventional riding/hiking packs.

The size adjustable harness allows the backpack position to be moved up or down to produce the best possible fit. The Kriega R20 can be worn with or without a waist strap. The waist strap is not really necessary for street riding

FEATURES

The R20 incorporates a side pocket with water-resistant YKK® zip, along with an inner sleeve pocket and a key clip in the large main compartment. The pack is compatible with a CE-Level 2 back protector and hydration reservoir.

Designed and built with the highest quality materials, only Kriega offers an ergonomically perfect luggage solution that’s simple to use even in the thickest gloves, yet fully customizable to suit the most demanding of motorcyclists.

TECH-SPECS

Main compartment with YKK water-resistant zip
Side access pocket with YKK water-resistant zip
Internal hydration sleeve with compression
Internal zipped mesh-pocket
SUPERSPACE: 5mm airspace back.
YKK water-resistant zips
HYPALON: Abrasion resistant re-enforcement
Scholler Dynatech With integrated 3M Scotchlite
420 D nylon RipStop: lightweight yet extremely strong
3M Scotchlite: reflective logo
Unique QUADLOC harness: adjustable back length and total arm freedom
Side access pocket
Optional Kriega 3 Liter Hydrapak + Tube available (sold separately)
Optional add on 5 or 10-liter drypacks
Optional harness pocket
Removable waist strap
10 year guarantee
20-liter capacity
470mm H x 280mm W x 150mm D (18.5" H x 11" W x 5.9" D)

WEIGHT
2.5 lbs / 1150 Grams

Kriega Overlander OS- PLATFORM 16-22mm Tube Fit

KOSPT-3

$159.00

OS-PLATFORM 16-20MM TUBE FIT (sold individually)

TUBE FIT - all 16 - 20mm standard hoop pannier frames including ROYAL ENFIELD, TOURATECH, HEPCO & BECKER, GIVI, KTM, RALLYRAID PRODUCTS, SHIFT MANUFACTURING & METAL MULE

Virtually indestructible Nylon-6 Platform, lighter than alloy and without fatigue issues machined with optional attachment points enabling you to set-up the bike to suit your adventure. Compatible with OS and US KRIEGA bags as well as most others on the market.

FEATURES

• 10mm NYLON-6 construction.
• CNC machined.
• Includes fitting kit for 16mm - 20mm hoop frames.
• Universal design, fits left or right side.

PLATFORM DIMENSIONS
390(w) x 300(h) x 10(d)mm
15.3"(w) x 11.8"(h) x 0.3"(d)

TOTAL WEIGHT
1200g / 42oz

SOLD INDIVIDUALLY

Pre Drilled for ROTOPAX mounts

Mount a single OS-SOFT PANNIER or a single 1.75 Rotopax™ fuel or water container.
Mount a OS-6 or OS-12 ADVENTURE PACK with single or double 1-gallon Rotopax™ fuel/water containers.

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

Kriega Overlander OS- PLATFORM 16-22mm Tube Fit

Kriega Roam Tool Tube

RSDRKTR-BB

$129.00

ROAM TOOL ROLL

The Roland Sands Design X Kriega Roam Tool Roll is an indispensable piece of kit on any road trip. Store in your luggage or mount to the bike with the Velcro® Molle system, it’s a haven for your tools and spares. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough Hypalon reinforcement, the blend of Classic and Modern materials with a technical twist. Unclip and roll-out to reveal four YKK® zip access pockets, 10 elastic loops, and a T6 alloy rail with 8 x 3/8" clips for socket management. Additional 1/4” and 1/2” socket rails can also be added. (sold separately)

Available in 2 color options: Black or Ranger.

Features:

• RSD waxed cotton and 1000D Cordura® construction

• 4 x 1-litre pockets with oversized YKK zips.

• 10 x elastic loops

• 6061-T6 alloy socket rail with 8 x 3/8" clips

• Optional 1/4" and 1/2" socket rails

• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps

• Heavy-duty carry handle with grip fabric

• 10 YEAR GUARANTEE

Volume 4-Litres (244 cu in) capacity

Weight - 600g/21oz

Kriega Roam Handlebar Bag

RSDRKBB-BB

$109.00

ROAM HANDLEBAR BAG

The Roland Sands Design X Kriega Roam Handlebar Bag is ideally suited for cruiser bikes with drag bar or t-bars with high risers, whilst the Velcro® Molle mounting system also enables a variety of other mounting options. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough hypalon reinforcement to give a classic look with modern technical twist. The main compartment is a roll-top waterproof Drypack, ideal for storing keep dry essentials. A quick access front pocket with dividers and key clip, keep small items to hand. An optional smartphone pocket can be mounted landscape or portrait for navigation with a touch-sensitive TPR screen cover or reverse mounted for easy access phone storage. Available in 2 color options: Black or Ranger.

Features:

• RSD heavy-duty waxed cotton and 1000D Cordura® construction

• Waterproof roll-top main body

• YKK® zip pocket with elastic inner dividers + quick-release key clip

• Removable smartphone pocket. Landscape or portrait mount

• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps

• 10 YEAR GUARANTEE

Volume 3-Litres (183 cu in) capacity

Weight - 485g /17oz

Kriega Tank - US Drypack Converter

KUSTK

$49.00

Converts a Kriega US-Drypack to a Tank Bag, compatible with US-5, US-10 & US-20 Drypacks plus OS-6 & OS-12 Adventure Packs.

Universal fit to most makes and types of bikes including bikes with metal and plastic tanks.
Easy to fit with frame loops at the front and hook & loop pads under the seat at the rear.
A scratch-resistant base fabric that holds the pack firmly in position and quick-release buckles give easy access to fuel filler.
Now with Cordura® fabric construction
Reflective logo print
Heavy-duty Velcro® fixing
10 YEAR GUARANTEE

FEATURES

WEIGHT: 250g / 8.8oz

PRODUCT CODE: KUSTK

Kriega OS-SHOULDER-STRAPS

KOAOSS

$25.00

OS-SHOULDER STRAP (sold each)

Convert your OS-ADVENTURE PACK or OS-32 /22 /18 SOFT PANNIER into a shoulder bag for easy carrying off the bike.

• Fits OS-6, OS-12, OS-18 , OS022 & OS-32 PACKS
• Length adjustable
• Ultra-tough HYPALON™ shoulder pad
• Aircraft-grade alloy buckles

WEIGHT: 100g

Kriega US-DRYPACK HOOK STRAP SET

KAMBS

$39.00

OS-STRAPS (pair)

Kriega OS-Straps

Fit: Upgrade alloy hooks for (pre-2012) US-10 and US-20 tailpacks or replacement fitting set for US-10, US-20 & US-30 DRYPACKS.

FEATURES

Hook: Upgrade alloy hook straps for older generation US-10 and 20 packs (standard on post 2012 product). Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.

Fitting: NB - Some bikes already have web loops attached to the seat-pad/base. In this case we still recommend the fitting of the Kriega loops, as fitting to the subframe is far stronger than to the seat.

Remove bike seat and locate the best mounting areas on the rear subframe. It may be necessary to slot the internal plastic tray if no subframe metalwork is exposed. Attach the 4x 20mm web loops securely to high strength areas of the frame. The 20mm loops are adjustable in length. Final adjustments should be carried out with the seat/pad fitted. Once set, the web must be threaded back through the adjuster to lock-off the webbing. See the threading diagram on this page. To fit the US-pack, hook on the web loop, attach the top quick-release buckle and cinch down the bag on to the bike. Always use the 2 x strap keepers on the web to manage the loose ends. Please also ensure that the quick-release buckles are correctly 'clicked'

TECH-SPECS

Custom 6061-T6 alloy hooks
Multi-position: inline or across bike seat
Easy on/off bike
No loose straps left on bike
Std. strap length 600mm
4 x Acetal ITW Airloc buckles
4 x 20mm sub-frame loops
10-year guarantee

WEIGHT: 200.00 Grams

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega OS-STRAPS

KOSS

$55.00

OS-STRAPS (pair)

Kriega OS-Straps

Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.

Features:

Aluminum end hooks
Nylon strapping
Hypalon anti-marring tabs
Sold as a pair