OVERSTOCK SALE 20% OFF of 2020-2021 Stainless Steel kits!
SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2024*
2020-2021 full and lower kits are compatible with SRC skid plate.
*2022-2023 models, you can not use the SRC V2 skid plate and lower crash bars.
PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine.
Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022. If you are unsure of how to order, shoot us an email for assistance.
Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit
Available Electropolished Stainless Steel (SILVER)or Satin Black Powder Coat steel
Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
Compatible with the stock skid plate and most aftermarket skid plates
Choose between:
Full set (Upper and lower crash bars)
Upper crash bars only (Lower crash bar can be added later to complete full set)
Lower crash bars only (Upper crash bar can be added to complete full set)
Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars. This is not rust and is perfectly normal.Product installation instructions can be found here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Available in brushed stainless steel or satin black powder coat finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Head Light Guard - Yamaha Ténéré 700
Y-T700-01-01-SL
Regular price
Sale price
$163.00
Save $-163.00
SRC Designs Head Light Guard for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2021
Available in Brushed Stainless Steel finish or Satin Black Powder coat steel
Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens
Developed for on or off-road use
Includes all necessary mounting hardware and is easily installed with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Frame Guard (LEFT) - Yamaha Ténéré 700
Y-T700-20-02
Regular price
Sale price
$48.00
Save $-48.00
SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2023
Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel.
Crafted out of 2 mm thick aircraft fuselage grade stainless steel
Laser-cut, CNC bent on state-of-the-art machines
Easy 5-minute install using the stock fasteners and common hand tools
Available in natural silver stainless finish or black powder-coated
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Does not fit 2022-2023 or models equipped with E5 catalytic converter
Protect your Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed stainless steel or satin black powder-coat
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protective Aluminum Skid Plate/Lower Engine Sump Guard - Yamaha Ténéré 700 V1 standard version
Y-T7-V1-09-01-AL
Regular price
Sale price
$368.00
Save $-368.00
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow. Standard protection version. We also offer an upgraded V2 version with left and right wing extensions that provide added protection for the waterpump and hoses on the right side and the ignition cover on the left side. It's available here on the website.
Fits Yamaha Ténéré 700 years 2022-2024 (and all Euro 5 exhaust models)
This skid plate is compatible with SRC lower crash bars.
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed aluminum steel or satin black powder-coat aluminum
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow and this V2 version offers left and right wing extensions compared to our standard model. The wings are visible in the photos and provide extra protection for the left side ignition cover and the right side water pipe and hoses.
PLEASE NOTE! This skid plate is not compatible with most lower crash bars, including SRC lower crash bars. That being said, the wing extensions do a good job of protecting the lower portions of the engine though.
Fits Yamaha Ténéré 700 years 2022-2024 and all Euro 5 exhaust models
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for the removal of skid plate
Available in natural brushed aluminum or Satin black powder coat made of a burly 4mm thick aluminum alloy.
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Save $-129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Acerbis Rally Pro X-Strong Handguards
2142000001
Regular price
$104.95
Sale price
$94.00
Save $10.95
The Rally Pro X-Strong is a durable injection-molded Nylon composite handguard that features an anodized aluminum bar for ultimate protection. It includes an indexed steel bar-end insert that mounts solidly and will not allow the guard to rotate in a crash. The included X-Strong mount kit allows the protection to be mounted to the handlebar with plenty of room for cables and brake lines. Optional spoilers are sold separately.
This is a universal part that fits most adventure motorcycles: Please note that some models with adjustable windscreens may need to have the windscreen in the forward-most location, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.
PLEASE NOTE: Some OEM bars will require the removal of weighted bar ends and possibly other minor modifications to install handguards.
For example-
We don't advise installing on the stock handlebars as the stock bars are super soft and usually get bent on the first drop.
On the HONDA CRF 250L and 300L including Rallys, there are a few mods needed to run aftermarket bars, mainly grinding off the locating tabs on the turn signal and start button housings. And you will need to use some stainless steel tape to increase the diameter of the bar surface where these housings clamp. And we. usually sand or file off the throttle housing tube ridges so you can't feel them after installing new grips.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Visit our Deals section
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.