38 products
Cargo Tail Rack - Yamaha Ténéré 700 V2
Y-T7-V2-04-02
Regular price
$288.00
SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2020 - 2025
The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1 top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics.
This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Pre-drilled for our 3L fuel can mount
Available in Satin Black powder coat
Fitment:
- Yamaha Ténéré 700 years 2020 - 2025
-
- Black powder-coated 3.25mm aluminium top plate
- 25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution. Plus acts as much much-needed grab handle!
- Fits to 4 x existing mounting points on rear of bike
- Supplied with 4 x stainless steel standoffs to replace existing OEM units
- Includes all stainless steel mounting bolts & counter-sunk washers
- Flat section of the rack sits approximately 10mm above the passenger seat (standard OEM seat)
- Slotted all around to cater for plenty of tie-down points
- Pre-drilled to fit SRC 3 liter plastic fuel tank
- Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
- Quick & easy fitment
- Black powder-coated 3.25mm aluminium top plate
Installation instructions and video
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
- Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
- Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
- Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
- Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
- Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
- The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
View product video instructions here:
