SRC Designs Full Rack System for the Yamaha Ténéré 700 Version 1 (V1)
Fits Yamaha Ténéré 700 years 2020 - 2024
Not compatible with the optional Rally seat
This is the adventure rack system you want! Innovative modular design made of high strength lightweight aluminum alloy.
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System features:
High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
Rear Cross Brace for increased rigidity in event of the inevitable tip over.
Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
Center Tail Rack is nicely sized and shaped to fit the rear of the Yamaha and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located). The side wings support the load of soft side luggage and keeps the luggage from compressing the side plates
Powder-coated satin black for a long-lasting durable finish that looks great on the Yamaha Ténéré 700!
Thecenter top rack is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the rack fits over the passenger seat so no place for a passenger to sit. The top rack with side racks (the part you are currently viewing) is good for riders that have soft luggage and side racks are slightly raised off the side with rubber stands-offs so they stop potential damage caused by luggage rubbing on the plastics. The new rear rack V2 with grab rails (available here) is great as it allows access to air filter & electrics etc. without the need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at the rear of the bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of the bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Made specifically for 2021-2024 Honda CRF 300L & Rally
Keeps your side stand from sinking into soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
Also available in a 1/2" taller version for bikes running taller suspension settings that can often cause the bike to lean over too far on the stand.
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Headlight Guard Royal Enfield HIMALAYAN
R-HM18-01-02
Regular price
$136.00
Sale price
$88.75
Save $47.25
Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light! Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.
Available in your choice of satin black powder coat laser cut 14 gauge steel or natural brushed stainless steel finish.
The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools!
Easily installed in just a few minutes with a Phillips screwdriver.
PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole. (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Fuel/Jerry Can and SRC Bracket kit for Royal Enfield Himalayan 2017-2021
R-HM18-28-02-L
Regular price
$138.00
Save $-138.00
Heavy-Duty Auxillary Fuel/Jerry Can Kits for HIMALAYAN
2017-2021 models
Purchase our pre-assembled kit and save $16 off of the individual parts cost!
The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100 miles range with SRC Auxiliary fuel can kits!
The SRC auxiliary fuel can bolts on using existing mounting points on the HIMALAYAN upper front cargo racks. Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service. Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing.
Please Note:Unlike competitor's kits, this kit is fully assembled and ready to install. We also apply a heavy-duty EPDM foam seating surface to prevent vibration and improve the functionality of the retention system.
Kit includes:
1 Himalayan-specific bracket (Select left or right side when ordering)
1- 3L (.8 gal) gas can with integrated spout and quick-release mount
Order 2 kits and install one on each side of the bike for 6 liters (1.6 gallons) of extra fuel!
MOTO STUFF Fuel cans are 10" tall, 8" wide, and 5" deep. A flexible spout is stored under the main cap.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Skid Plate Engine Guard HONDA CRF 300L 2021-2024
H-CRF300L-09-01-AL-1
Regular price
Sale price
$159.00
Save $-159.00
Protect your 300L's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware
Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in both Silver Aluminum and Satin Black Powder Coat options
The 300L Rally skid plate/Crashbar combo is available here.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Laser-cut 2 mm thick Stainless steel and symmetrical honey-comb design provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Top Rack Dimensions: 14" long, 10" wide at the front and tapering towards the rear to 9" wide.
Nicely sized and shaped to fit the rear of the 2021 300L & Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).
Includes high-quality stainless steel mounting hardware, mounts utilize the existing steel subframe rack points (no drilling required), the installation guide is also included.
Powder-coated satin black for a long-lasting durable finish that looks great on the 300L & Rally!
Also available in an economy-minded steel version (3.9 lbs) Please see this product on our site for more details.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.