Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for passenger to sit. The full version of the V1 top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics. This new rear rack (V2) with grab rails is great as it allows access to air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Pre-drilled for our 3L fuel can mount
Available in Satin Black powder coat
Fitment:
Yamaha Ténéré 700 years 2020 - 2024*
Black powder-coated aluminium
Laser cut 3.25mm aluminium plate
Light but super strong - only 1.3kg
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above the passenger seat (standard OEM seat)
Slotted all round to cater for plenty tie-down points
Pre-drilled to fit SRC 3 litre plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
Quick & easy fitment
Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts)
SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2021-2024 Version 1 (V1)
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Black powder coated aluminium
Laser cut 3.25mm aluminium plate
Light but super strong - only 1.3kg
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above passenger seat (standard OEM seat)
Slotted all round to cater for plenty tie down points
Pre drilled to fit SRC 3 litre plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
Quick & easy fitment
Please note this rack will not fit with the rally seat
Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts)
The top rack is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the rack fits over the passenger seat so no place for a passenger to sit. The top rack with side racks is good for riders that have soft luggage and side racks are slightly raised off the side with rubber stands-offs so they stop potential damage caused by luggage rubbing on the plastics. The new rear rack V2 with grab rails (available here) is great as it allows access to air filter & electrics etc. without the need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at the rear of the bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of the bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Full Rack System V1 - Yamaha Ténéré 700
Y-T700-04-02-SET
Regular price
$264.00
Save $-264.00
SRC Designs Full Rack System for the Yamaha Ténéré 700 Version 1 (V1)
Fits Yamaha Ténéré 700 years 2020 - 2024
Not compatible with the optional Rally seat
This is the adventure rack system you want! Innovative modular design made of high strength lightweight aluminum alloy.
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System features:
High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
Rear Cross Brace for increased rigidity in event of the inevitable tip over.
Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
Center Tail Rack is nicely sized and shaped to fit the rear of the Yamaha and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located). The side wings support the load of soft side luggage and keeps the luggage from compressing the side plates
Powder-coated satin black for a long-lasting durable finish that looks great on the Yamaha Ténéré 700!
Thecenter top rack is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the rack fits over the passenger seat so no place for a passenger to sit. The top rack with side racks (the part you are currently viewing) is good for riders that have soft luggage and side racks are slightly raised off the side with rubber stands-offs so they stop potential damage caused by luggage rubbing on the plastics. The new rear rack V2 with grab rails (available here) is great as it allows access to air filter & electrics etc. without the need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at the rear of the bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of the bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Gas / Jerry Can
3LJC
Regular price
$86.00
Sale price
$78.00
Save $8.00
MOTO STUFF Fuel/Jerry Can with mount
Please select the application for your bike below:
Rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack. Includes quick release mount and hardware that easily attaches to the SRC rack, which is pre-drilled for this mount.
Please select the application for your bike below:
Can dimensions. 10" tall X 5" thick X 8" wide
Kriega US-10 Drypack Soft Luggage
KUSC10
Regular price
$132.50
Save $-132.50
Kriega US-10 Drypack
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.
The US-10 Drypack provides 10 liters of storage for those keep-dry essentials. Ideal for a full day on the bike when you may need to carry waterproofs, spares gloves or a tool kit.
FEATURES
Guaranteed 100% waterproof roll-top closure main compartment.
Universal-fit to any type of motorcycle.
Mount inline or across the seat / rear rack
Easy to fit with quick-release hooks attaching to web loops secured to the bike’s subframe.
Use individually or hook-on additional US-Drypacks to build your ideal luggage system up to 70 litres.
Side pocket and rear mesh pocket provide additional quick-access storage.
Use as a tank bag, with the addition of a Kriega TANK Converter.(Sold Separately)
Hook-on to most Kriega Back packs for additional waterproof storage. excluding Max28, Hydro-2
DIMENSIONS 330(h) x 240(w) x 120(d)mm 13”(h) x 9.4”(w) x 4.7”(d)
VOLUME 10-Litres (600cu in) capacity
WEIGHT 500g / 17.6oz
Kriega US-20 Drypack Soft Luggage
KUSC20
Regular price
$195.00
Save $-195.00
Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.
Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.
The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.
