Crash Bar Set HONDA NX500 2024 - 2026 (E-Clutch ETA Mid August)
Available electropolished 304 stainless steel silver or satin black powder coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
NOT COMPATIBLE with SW Motech skid plate and possibly others. We suggest checking the mounting instructions of both products to see if there is any obvious interference. Our SRC skidplate is designed to work in tandem with the SRC crash bars.
A common question is “Can the SRC skid plate and SRC crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware
Developed for on and off-road use
The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
Compatible & will fit withSRC, Hepco & BeckerandSW Motech upper & lower lower crash bars
Please note SRC skid plate is not compatible with the GIVI lower crash bars
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions.
*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock that pushed a slider mounting bolt into the engine case and cracked the case.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
HEADLIGHT GUARD HONDA NX500
H-NX500-01-02
Regular price
$168.00
Save $-168.00
HEADLIGHT GUARD 2024-2025 HONDA NX500 - Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat - Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning - Developed for on and off-road use
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Radiator Guards HONDA NX500
H-NX500-02-02
Regular price
$118.00
Save $-118.00
Radiator Guard HONDA NX500
Fits HONDA NX500 2024-2026
Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris. - This protector made of stainless steel sheet 304 grade 1.5 mm thickness - Can be easily mounted in a few minutes with common hand tools
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Tail Rack HONDA CB500X & NX500
H-CB500X-04-02-NEW
Regular price
$248.00
Save $-248.00
Fits 2012-2025 HONDA CB500X & NX500
Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your CB500X!
This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe. You can safely carry up to 35 lbs (16 Kg's) with this rack system.
Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long.
No drilling or modifications required, easily mounts in under an hour with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Wide Foot Peg Adaptors for Honda CB500X & NX500
H-CB500X-18-01-SL
Regular price
$78.00
Save $-78.00
Fits: 2012-2025 HONDA CB500X & NX500
Kit includes a pair of wide peg adapters
If you've never run a wider high-quality footpeg, you will be pleasantly surprised by the improvement this inexpensive and easy to install upgrade will make! Upgrading to a wider platform footpeg makes a dramatic improvement in comfort as well as greatly improving grip in wet muddy conditions. Our peg adaptors are a great value and easy to install.
It only takes about 10 minutes to install with common hand tools. The additional width and aggressive tooth profile offer about more contact surface to reduce foot arch strain and improve grip. The wide platform and increased contact points will improve rider confidence in sketchy situations!
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side Stand/Kickstand Foot Enlarger CB500X & NX500
H-CB500X-14-01-SL
Regular price
$48.00
Save $-48.00
Fits 2013-2025 Honda CB500X & NX500
Keeps your side stand from sinking into the soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Crash Bar Set Honda NX500 E-Clutch 2026
H-NX500E-17-02-FL
Regular price
$488.00
Save $-488.00
Crash Bar Set Honda NX500 E-Clutch 2026
Available electropolished 304 stainless steel silver or satin black powder coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
NOT COMPATIBLE with SW Motech skid plate and possibly others. We suggest checking the mounting instructions of both products to see if there is any obvious interference. Our SRC skidplate is designed to work in tandem with the SRC crash bars.
A common question is “Can the SRC skid plate and SRC crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
