12 products
Skid Plate and Engine Guard HONDA CRF 300L Rally 2021-2024
H-CRF300RL-V2-17-01
Regular price
$448.00
Protect your 300L Rally's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's innovative heavy-duty skid plate/crash bar combo!
In regards to a conventional full upper and lower crash bar set for the Rally, It’s SRC’s opinion that the upper front side fairing mount isn’t strong enough for a full crash bar set. The only upper attachment point is on the bikes Rally tower frame and any impacts to the crash bar would end up damaging the tower frame structure, so they developed this kit below. Plus in most falls, the end of the handlebar and footpeg hold the bodywork away from the ground.
To Clarify-
The commonly used upper front shroud point is part of the headlight and windscreen tower structure and it would be damaged in a light fall/tip over as it is of light metal construction.
Does not fit the 250L /
250L Rally models *see detail at the bottom of this page regarding installation on the 300L.
- Stout 1" (25mm) drawn over mandrel crash bar tube (DOM) with 1/8" (3mm ) wall thickness
- Skid plate is made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware.
- Developed for on and off-road use
- Cutouts allow access to common service points without the need for removal of skid plate
- Weight 16.5 lbs / 7.5kg
Product instructions located here
* We have had inquiries about fitting this kit to the 300L, and it does fit, but be aware that the crash bars are positioned a couple of inches away from the motor to clear the Rally's bodywork. Here are a few photos from a customer that installed them on his new 300L recently.
Skid Plate Engine Guard HONDA CRF 300L 2021-2024
H-CRF300L-09-01-AL
Regular price
$159.00
Protect your 300L's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
- Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware
- Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
- Developed for on and off-road use
- Cutouts allow access to common service points without the need for removal of skid plate
Available in both Silver Aluminum and Satin Black Powder Coat options
Installation instructions 
The 300L Rally skid plate/Crashbar combo is available here.
This skid plate can be installed on the Rally models by removing / trimming the bodywork plastics.
Here's a link to a video of the process by a friend of ours.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Radiator Guard HONDA CRF 300L & 300L Rally
H-CRF300-02-02
Regular price
$129.00
SRC Designs Radiator Guard kit fits HONDA CRF 300L (& RALLY) 2021-2024 models
Laser-cut 2 mm thick Stainless steel and symmetrical honey-comb design provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Available in powder coat black or natural silver
Product instructions located HERE
Installation video: For 300L Below
Installation Video for 300L Rally Below
- Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
- Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
- Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
- Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
- Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
- Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
- The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
View product video instructions here:
