39 products
Sale
Quick view
Sale
Quick view
Plug and play Do-It-Yourself Accessory Lead Kit 2019-2026 HONDA CRF 450L / RL
450RL DIY
Regular price
$26.00
HONDA was nice enough to include a handy 10 AMP* switched accessory lead connector that is clipped to a metal bracket just behind the bottom of the left radiator (see photo in product listing), however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors. Leads are 24" long and allow for safe routing from the lower-left radiator area following the factory harness routing to the instrument cluster or handlebar area.
Plug and play Do-It-Yourself accessory lead version is easy to install, just unclip the stock connector cap, connect this lead and attach to your accessory with the included posi lock quick connectors! Posi Lock instructions are included in each kit. D-I-Y Kit includes 24" 2 circuit lead ( 18 gauge red 12V+ and Black ground) terminated with Posi Lock connectors with abrasion sheath and 2 black zip ties for secure installation. Posi-Lock® Connectors have been put to the test worldwide since 1997. Superior in-line splices with just hand tightening! These electrical connectors require no crimping or soldering. An electrical connector that meets the needs of todays OEM's, and is so good, it's reusable. Truly a connector for the 21st century.
* This is a 10 AMP Switched circuit, which means it is turned off and on by the bikes ignition switch.
Here's a shortlist of the average current draw for popular accessories:
- Heated Grips 3-5 AMPS
- USB Phone Charger 1-2 AMPS
- Heated Gloves 3 AMPS
- Heated Jacket 8 AMPS
Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Auxiliary Accessory Leads 2019-2026 HONDA CRF 450L / 450RL
450RL USB A/C
Regular price
$68.00
HONDA was nice enough to include a handy 10 AMP* switched accessory lead connector that is clipped to a metal bracket just behind the bottom of the left radiator (see photo in product listing), however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors and built this 12-volt socket version. Leads are 24" long and allow for safe routing from the lower-left radiator area following the factory harness routing to the left upper triple clamp bolt for a quick and secure mount.
The Dual USB-A socket shown in the installed option images below is no longer available; it has been replaced with this new and improved illuminated USB-A&C version.
DUAL USB Version: This is a high-quality dual USB charger with an OE appearance featuring a water-resistant spring-loaded hinged cover. The dual USB charger outputs 2.1 amps per port for fast phone charging and features a blue led indicator to let you know it's on. Easily installed in just a couple of minutes, all you need is a 10mm wrench or socket to install the bracket to the upper triple clamp. And plug the other end into the auxiliary power connector behind the lower left radiator area following the factory harness routing.
12 Volt Socket Version: (cigarette lighter style) This is a high-quality 12-volt socket we developed to offer an OEM appearance, with a water-resistant hinged spring-loaded cover. Easily installed in just a couple of minutes, all you need is a 10mm wrench or socket to install the bracket to the upper triple clamp. And plug the other end into the auxiliary power connector behind the lower left radiator area following the factory harness routing.
All Kits include 18" 2 circuit lead (18 gauge Red 12V+ and Black ground) with abrasion sheath and 2 black zip ties for secure installation.
This is a 10 AMP Switched circuit, which means it is turned off and on by the bikes ignition switch.
Here's a shortlist of the average current draw for popular accessories:
- Heated Grips 3-5 AMPS
- USB Phone Charger 1-2 AMPS
- Heated Gloves 3 AMPS
- Heated Jacket 8 AMPS
- Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
*Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
ROUGE
Regular price
$159.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
- Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
- Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
- Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
- Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
- Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
- The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
View product video instructions here:
DoubleTake Adventure Mirror Set
DTM
Regular price
$145.00
PLEASE NOTE!
Late in 2024 DOUBLETAKE began to manufacture their own 6" arms as RAM copied their rugged mirror idea and became a competitor. So DOUBLETAKE took the opportunity to further improve their product. That is what we have in stock. There are a few images shown with the old RAM parts, but the first image is what you will receive.
Our kit includes:
DoubleTakes 6" arms, full adapter kit to allow fitment to all adventure bikes.
- This kit fits almost any motorcycle make and model - Each pair comes with a Universal Adapter Kit which includes two 10 x 1.25mm Extensions, two 10 x 1.5mm BMW adapters, and one Reverse-Thread Adapter.
- Here is a quick list:
- HONDA: 250L, Rally, CB500X, NC750, Africa Twins
- KAWASAK: 300X Versys, Versys 650, Versys 1000
- KTM: All adventure models
- SUZUKI: V-Strom 650, V-Strom 1000
- TRIUMPH: Tigers
- Royal Enfield: Himalayan
- DUCATI: Multistrada
- BETA: 500RR-S
- BMW: 310 GS, 310 R, 800 GS, 1200 GS, 1200 GS
- YAMAHA: FJ-09, Tenere 700
- And many more!
Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable DoubleTake ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion. We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility are most important to us and that's why we run the DOUBLETAKE ADVENTURE mirrors on all of our bikes.
Kit includes: 2 mirrors, 2 - 6" arms, 2 - 1" ball mounts, and thread adapters for your bike if needed, a small tube of Loctite thread locker (SRC exclusive!) Apply thread locker to adapter and ball mount threads to prevent your mirrors from vibrating loose. Everything you need to install them in just a few minutes on most bikes!
Install Tip: We recommend using one of the extension arms tightly clamped onto the ball mount to tighten the ball mount (and adapters if needed) into the mirror mounts of your bike.
PS- If you are price shopping, please note that we include the correct adapters and spacers for the specific models below as well as Loctite thread locker to keep them from vibrating loose!
Below is the DoubleTake Mirror inventors story of how the DoubleTakes came to be-
This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.# double take
