Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable Double Take ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion. We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility is most important to us and that's why we run the DOUBLE TAKE ADVENTURE mirrors on our bikes.
Kit includes 2 full mirrors and everything you need to install them quickly with common hand tools!
Below is the Double Take Mirror inventors story of how the Double Takes came to be-
This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.
HONDO GARAGE Perfect Squeeze Phone GPS mount
Simply put, this is the best off-road phone mount you can buy. Designed specifically for Adventure and off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop your phone in and out. The Perfect Squeeze is made from precision-machined aluminum and stainless steel, and it works with any phone and any case.
Attn: HONDA CRF 250L Rally owners, we offer a version of the Perfect Squeeze that includes the correct low profile mount and pre-installed hardware for an additional $8 to position your phone above the instrument cluster on the Rally Tower Cross Bar so it will not obstruct your view of the instrument cluster turn signal indicators, neutral and high beam indicators.
The CRF 250L Rally kits are complete and assembled ready to clamp onto the HONDA CRF 250l Rally upper tower crossbar.
The clamping jaws open to a maximum3-1/2" width (89mm)
Mount your phone either which way!
The included adapter plate below bolts to your Perfect-Squeeze phone mountand lets you use the Low-Profile mounting clamps to install your phone in portrait mode.
Kriega US-30 Drypack
Kriega US-30 Drypack
The Kriega US-30 is 30-litre capacity 100% waterproof motorcycle tailpack/saddlebag. Unique design solution enables fitment can fit directly to the bike's subframe or solid mounting under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike. Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.
The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 90-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom CNC milled, aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.
445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)
12 Volt / USB Accessory Leads 2019-2020 HONDA CRF 450L
HONDA was nice enough to include a handy 10 AMP* switched accessory lead connector that is clipped to a metal bracket just behind the bottom of the left radiator (see photo in product listing), however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors and built them in 3 versions to suit most needs. All leads are 18" long and allow for safe routing from the lower left radiator area following the factory harness routing to the left upper triple clamp bolt for a quick and secure mount.
DUAL USB Version:This is a high-quality dual USB charger with an OE appearance featuring a water-resistant spring loaded hinged cover. The dual USB charger outputs 2.1 amps for fast phone charging and features a blue led indicator to let you know it's on. Easily installed in just a couple of minutes, all you need is a 10mm wrench or socket to tighten the remove and install the bracket mounting bolt to the upper triple clamp. And plug the other end into the auxiliary power connector behind the lower left radiator area following the factory harness routing to the left upper triple clamp boltfor a quick and secure mount.
12 Volt Socket Version:(cigarette lighter style) This is a high-quality 12-volt socket we developed to offer an OEM appearance, with water-resistant hinged spring-loaded cover. Easily installed in just a couple of minutes, all you need is a 10mm wrench or socket to tighten the remove and install the bracket mounting bolt to the upper triple clamp. And plug the other end into the auxiliary power connector behind the lower left radiator area following the factory harness routing to the left upper triple clamp boltfor a quick and secure mount.
All Kits include 18" 2 circuit lead (18 gauge red 12V+ and Black ground) with abrasion sheath and 2 black zip ties for secure installation.
Plug and play Do-It-Yourself accessory lead version is easy to install, just unclip the stock connector cap, connect this lead and attach to your accessory with the included posi lock quick connectors! Posi Lock instructions are included in each kit. D-I-Y Kit includes 18" 2 circuit lead( 18 gauge red 12V+ and Black ground) terminated with Posi Lock connectors with abrasion sheath and 2 black zip ties for secure installation. Posi-Lock® Connectors have been put the to test worldwide since 1997. Superior in-line splices with just hand tightening! These electrical connectors require no crimping or soldering. An electrical connector that meets the needs of todays OEM's, and is so good, it's reusable. Truly a connector for the 21st century.
12 Volt Socket USB Adapter-For your convenience, We've soured a rugged Dual USB charger with aluminum housing for use with the 12 Volt socket kit- Available above. It does not fit flush, so it keeps the cover open about 3/4 of the way open, which provides easy access to the lower port as well as providing some protection against light rain/water exposure.
* This is a 10 AMP Switched circuit, which means it is turned off and on by the bikes ignition switch.
Here's a short list of the average current draw for popular accessories:
Heated Grips 3-5 AMPS
USB Phone Charger 1-2 AMPS
Heated Gloves 3 AMPS
Heated Jacket 8 AMPS
Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
DANGO Gripper Mount for GoPro and other POV cameras
he quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!
Dango Designs Gripper Mount Features:
Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.
Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Why upgrade your brakes? You can easily lock them up and slide / skid now right? That's the problem. Modern motocross bikes have very powerful brakes, however they don't offer much in the way of modulation or linear application. That is the ability to achieve maximum braking force without wheel lock up. As soon as the wheel locks up, you lose control or much worse! Power without control is why 4 strokes hook up and outperform 2 strokes. Your ability to modulate (control) the braking force is what makes for a great brake that you can put to maximum use. MOTO STUFF Bladetmbrakes are the highest quality and absolute best performing brakes you can buy.
Team HONDA and the GEICO Factory Connection team have been winning titles with MOTO STUFF BladetmBrakes for several years. They can run any brakes they want and they choose the MOTO STUFF Blade System as it provides ultimate performance and significantly improved durability, heat rejection and lasts 2-3 times longer than the competition.Wide modulation range, linear and consistent performance rapidly builds your trust in your brakes at the limit.Below are the main benefits you’ll enjoy with a MOTO STUFF BLADE SYSTEM that will improve your competitive edge!
36% increase in swept area and 18% increase in moment arm for dramatic improvement in braking power, control and modulation. (AKA The ability to develop maximum stopping power without locking up the brakes)
Trick lightweight design of the Moto Stuff Blade System weighs only 544 grams (19.2 oz) and looks like nothing else on the market. Nearly a full pound lighter than inferior floating designs.The Blade system is 40% lighter than any other 280mm system.That is huge! Title winning teams spend thousands of dollars on Titanium axles and fasteners to shed 8-10 oz's off the front suspension. This is also unsprung and rotating weight, every pound of reduced unsprung weight is the equivalent of 3 pounds savings of sprung weight off the chassis. Reducing rotational mass also has a noticeable positive effect on turn in and overall handling.
280mm rotor laser cut and machined in heat-treated 400 series stainless steel for warp free performance and superior heat dissipation.Moto Stuff Blades typically last 2-3 times longer than the competition!
Hi-strength 6061 billet aluminum bracket is hard anodized for a tough long lasting finish. Rotor material is compatible with all top quality aftermarket pads, we recommend stock pads or our AP Racing Pads for best performance.
Easily installed in under 30 minutes with common hand tools
1 year warranty against defects in material or workmanship
Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!
Available for ALTA, HONDA, KAWASAKI, KTM, HUSQVARNA, SUZUKI and YAMAHA MX and offroad bikes.Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!