Honda CB500x

SRC DESIGNS GPS bracket bar 2016-2022 HONDA CB500X

Available in Satin finish stainless steel silver or satin black powder coat.

The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your bike. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.

The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a  common 7/8" clamp.

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

2014-2023 HONDA CB500X

Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware 
  
• Developed for on and off-road use
  
• The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
  
• Cutouts allow access to common service points without the need for removal of skid plate

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions.   See images below for installing our skidplate with GIVI crash bars. 

*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock that pushed a slider mounting bolt into the engine case and cracked the case.

Installation instructions and video

 * Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits HONDA CB500X 2013-2023

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

• Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
• Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
• Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
• Flexible front web conforms to your object.
• Robust dual torsion spring provides strong clamping force.
•  2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
• Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
• Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included.

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019) 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega US-30 Drypack

The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.

Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.

Features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• Acetal ITW Airloc buckles
• YKK water-resistant zips
• 6061-T6 alloy fitting hooks
• Side access zip pocket  (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• 1 x set US Alloy Hook Straps included
• 10-year guarantee
• 30-liter capacity 
• 445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)

Buy it now - Use it forever - Lifetime Guaranteed

COMPATIBILITY
Works seamlessly with all cell phones and devices up to 3.4 inches wide and 5/8" thick. This includes all standard and Plus sized iPhones with or without a protective case. Samsung Galaxy, LG, HTC, you name this motorcycle phone mount will hold it.. Securely.
The beauty of this mount is you're able to get any phone, with any phone case, in and out of the cradle with a single hand. Loaded with dual industrial spring creating a rock steady hold on your cell phone while allowing to easily get the phone in and out of the cradle with a single hand.

INSTALLATION 
Installation is a breeze - 2 Minute Installation
The kit comes with 3 custom fittings for 7/8", 1" and 1-1/4" bars (Also, works with 1.31" over-sized road bike or mountain bike Bars.)  And fits all SRC GPS Bars
1. Simply place the appropriate spacer over the bar. Connect the clamp with the included wrench and two screws.
2. Loosen the ball and socket joint and position the phone into the desired position. Lock into place.
3. From here you will be able to easily place and remove your phone from the mount with a single hand.
Ride off into the sunset...

TACKFORM ENDURO Overview

Installation Overview below

HEADLIGHT GUARD fits 2016-2018 HONDA CB500X
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Developed for on and off-road use

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD 2019-2022 HONDA CB500X
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

Fits 2013-2022 Honda CB500X

• Keeps your side stand from sinking into the soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware
• Compatible with OEM and aftermarket center stands
• Serrated face nuts help prevent loss from vibration

Product instructions located here

NOTE: Also available in a 12mm tall version for those of you that have raised the suspension a bit and are having issues with the bike leaning over too far when on the side stand. See this product on our website.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike. 

Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.

The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.

Kriega US-20 dry pack features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• 420D nylon ripstop - lightweight yet extremely strong
• 6061-T6 alloy fitting hooks
• Acetal ITW Airloc quick-release buckles
• YKK water-resistant zip on side pocket
• Side access zip pocket (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• US Alloy Hook Straps included
• 10-year guarantee
• 20-liter capacity     
• 15.7" H x 10.2" W x 7.5" D

OS-18 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs. 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-18 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

 MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks
• Mount directly to pannier frames  

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

KRIEGA LUGGAGE CAM STRAPS

A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.

Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.

1.5M  (5ft) long, high quality 1" webbing

Low weight - 1.7oz / 50g per strap

WEIGHT: 3.5oz - 100g

THE VERSATILE ‘ACTIVE’ PACK FOR ROAD AND TRAIL

We love our R20's, they have a nice body-hugging contoured design that looks sharp and feel great. And the Quad-Loc harness system does a great job of distributing the load taking the stress off your shoulders that is so common on conventional backpack designs. It's the perfect size for day trips or for an extra 20L of storage on your longer adventures.  Although KRIEGA doesn't describe it as waterproof, we've never had any issues of our gear getting wet while riding in the rainy winters up here in the NW.   

The Kriega R20 motorcycle backpack is an ‘active’ riding pack with Kriega's unique QUADLOC-lite harness system. The harness is angled away from underarms for total freedom of movement and is exceptionally easy to use with none of the harness re-adjustment necessary on conventional riding/hiking packs.

The size adjustable harness allows the backpack position to be moved up or down to produce the best possible fit. The Kriega R20 can be worn with or without a waist strap. The waist strap is not really necessary for street riding

FEATURES  

The R20 incorporates a side pocket with water-resistant YKK® zip, along with an inner sleeve pocket and a key clip in the large main compartment. The pack is compatible with a CE-Level 2 back protector and hydration reservoir.

Designed and built with the highest quality materials, only Kriega offers an ergonomically perfect luggage solution that’s simple to use even in the thickest gloves, yet fully customizable to suit the most demanding of motorcyclists. 

TECH-SPECS

• Main compartment with YKK water-resistant zip
• Side access pocket with YKK water-resistant zip
• Internal hydration sleeve with compression
• Internal zipped mesh-pocket
• SUPERSPACE: 5mm airspace back.
• YKK water-resistant zips
• HYPALON: Abrasion resistant re-enforcement
• Scholler Dynatech With integrated 3M Scotchlite
• 420 D nylon RipStop: lightweight yet extremely strong
• 3M Scotchlite: reflective logo
• Unique QUADLOC harness: adjustable back length and total arm freedom
• Side access pocket
• Optional Kriega 3 Liter Hydrapak + Tube available (sold separately)
• Optional add on 5 or 10-liter drypacks
• Optional harness pocket
• Removable waist strap
• 10 year guarantee
• 20-liter capacity
• 470mm H x 280mm W x 150mm D (18.5" H x 11" W x 5.9" D)

WEIGHT
2.5 lbs  / 1150 Grams 

The NEW OS-BASE is the latest addition to the range. An innovative modular pannier system that fits virtually any trail, enduro or dual sport bike without the need for metal pannier frames.

The OS-BASE is an over the seat harness' which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as panniers.

The modular design enables you to modify your luggage set-up to suit your ride - from a day’s single track to longer adventure trips.

By adding an additional OS-ADVENTURE PACK as a top bag, you have a possible 100% waterproof, highly durable carrying capacity of up to 54 liters.

The flexible design of the OS-BASE also enables you to mount earlier model Overlander 15 packs as panniers, US-DRYPACKS as top bags and includes ‘Loop Mounts' to attach a tent or sleeping mat.

After the initial set-up, it’s quick and easy to put on and take off and the heavy-duty hypalon construction with a semi-rigid polypropylene core is very stable and lightweight.

The unique OS-RACK LOOP mounting system,* provides a very tough and reliable solution to the demands of off-road luggage carrying. 

*Includes 2 x OS-RACK LOOPS which require 2 x 6mm holes drilled in the rear fender for fitting.

FEATURES

• Carrying capacity from 12 to 54 Litres with center pack mounting option.
• Heavy-duty Hypalon™ construction.
• Quick & easy to put on/take off.
• Reinforced stitching on all stress points.
• Aircraft grade alloy hooks.
• Non-slip cam buckles.
• 2 x OS-RACK LOOPS included.
• 10 YEAR GUARANTEE

FITTING OPTIONS

Once the OS-RACK LOOPS are mounted on the rear fender and the OS PACKS of your choice are mounted to the BASE, fitting is quick and easy.

1. Hook-on the two top straps to the OS Rack Loops but leave loose.

2. Loop the two lower straps around the bike frame at the lowest possible position and hook them back to the loops on the strap making them as tight as possible.

3. Stand at the rear of the bike and pull the top straps as tight as possible, taking up the slack until the packs fit tightly to the bike.

4. Hook-on an additional top pack to the Loop Mounts on the OS-BASE and the OS-Rack Loops.

IMPORTANT If the OS-BASE is in contact with the exhaust silencer you must fit a heat shield.

DIMENSIONS
510(L) x 190(w) mm
20(L) x 7.5(w) ins.

WEIGHT
700g - 24.7oz

Unsure of what awesome moto accessories to give your favorite adventure rider? SRC MOTO is now offering gift cards! You can choose from several different card values, or if you don't see one you want, just contact us at info@srcmoto.com and we will create it for you.

SRC MOTO Gift Cards have no expiration date and can be redeemed at either of our online stores (Or if you catch us at an event!):

• SRC MOTO.com - www.srcmoto.com
• MOTO STUFF.com - www.motostuff.com

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

Kriega Overlander-S OS32 Drypack

Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)

(sold each, rigid platform mounts shown sold separately)

The Overlander-S series of roll-top, 100% waterproof bags feature semi-rigid walls for easy loading and shape retention. The OS-32 bags are intended as foundation saddlebags that readily accept the smaller bags within the series as modular tethers of supplemental storage. All OS-PACKS are 100% waterproof and constructed from ultra-abrasion resistant Hypalon and 1000D Cordura nylon that is ready to deal with the toughest of adventures.

Features:

• 100% waterproof construction
• Semi-rigid wall panels retain shape when empty
• Ultra-abrasion resistant Hypalon strapping
• 1000D Cordura nylon body construction
• 32 liter capacity ea.
• Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
• Sold each

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

FITTING OPTIONS

The OS-32 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-32
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. Available here on our website. 

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

Kriega Overlander-S OS22 Drypack

DIMENSIONS
400(h) x 420(w) x 150(d) mm
15.7”(h) x 16.5”(w) x 5.9”(d)

(sold each, rigid platform mounts shown sold separately)

The OS-22 Soft Pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.

The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.

Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick-release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.

Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS STRAPS or as a single pannier by hooking-on to a specially designed OS Platform base. 
(both sold separately and available here on our site)

FEATURES

The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.

A reinforced handle assists carrying heavy loads off the bike. Plus an optional  OS Shoulder Strap can be hooked on to convert to a shoulder bag.

A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.

Hi-Vis details front and rear add an extra safety element for low light riding.

 TECH-SPECS

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

WEIGHT
2600g - 91.7oz

VOLUME
22 litres (1340cu in)

FITTING OPTIONS

The OS-22 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-22
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform. Available here on our website. 

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

OS-STRAPS (pair)

Kriega OS-Straps

Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.

Features:

• Aluminum end hooks
• Nylon strapping
• Hypalon anti-marring tabs
• Sold as a pair

SUBFRAME LOOP STRAPS

Provides a strong hook-on location to mount OS-ADVENTURE PACKS or US-DRYPACKS to most types of bike.

Get an extra set so you can quickly move your US Drypacsk to another bike etc. 

Simply thread around the bike subframe and back through the buckle. 

4 x 500mm (20") lengths of webbing with loop and buckle at one end. 

NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit. 

WEIGHT
50g

Fits 2019-2020 HONDA CB500X (pair) 

May fit other years, but we're not 100% sure as we had one customer that had turn signals that were about 1/2 an inch longer than the guard. 

For reference, these are for 3-1/2" long signals as measured below. 

Order 2 sets if you want to do front and rear. 

Protect the vulnerable turn signals from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 1/8" (3mm)  stainless. 

• Easy 5-minute install using the stock fasteners and common hand tools.
• Choose between natural silver stainless or satin black powder coat finishes. 
• Sold as a pair

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.