Kawasaki Overstock

Installation PDF 

PLEASE NOTE: This part has been redesigned due to an issue related to the resonant vibration inherent in the KLR.  SRC's new design became available April 12th, 2023. The new design incorporates a fully isolated main mount system using urethane through bushings. 

Protect your KLR's plastics and engine with SRC crash bars.

• Unique design provides full protection of the Upper and Lower engine/body/chassis
• Manufactured out of steel DOM Tubing of 1” diameter and 1.8 mm thickness, and processed in state-of-the-art laser cut machines for cutting, notching and formed by CNC tube bender
• Welded using TIG process and shot blasted to remove all residual stresses, before surface protection process
• Satin Black Electrostatic Powder Coat Finish, provides corrosion resistance to endure all weather conditions
• Kit includes all mounting hardware, bracketry and sacrificial compression molded resin sliders to absorb impact
• Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site
• Compatible with SRC Skid Plate (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)

Fitment for: Kawasaki KLR 650 & KLR 650S 2022-2024*
* The upper light bar on the adventure model does not have to be removed, but the lower engine guards do. 

Here's a nice video (below) from a customer who installed the crash bars and skid plate at the same time.  When installing the SRC crash bars with SRC skid plate, use the brackets and bolts that come with the skid plate as shown in the video below beginning at around the 3:00 minute mark. 

And here's another customer video showing the install of the SRC skid plate and SRC crash bars. It's an older video, so it shows the earlier version of the crash bars that do not have the urethane isolation bushings, but it does have some helpful information. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your headlight from impact damage with the SRC Designs Headlamp guard kit.

• The Head Light Guard is Laser cut from 2 mm thick Stainless-Steel material
• Compatible hardware and Bracketry for ease of fitment and mounting
• 3. Easy to remove the Head Light Guard from the Grommet mounts for cleaning inside

Available in powder coat black or natural silver

Fitment: Kawasaki KLR 650 2022-2024 

Does fit the Adventure model, tight and takes little finagling! But they do fit.  

Installation instructions and video



* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your KLR's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate. 

• Made of 4mm thick aerospace-grade aluminum sheet with stainless hardware 
• Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for the removal of skid plate
• Compatible with SRC Crash Bars (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)

Available in both Silver Aluminum and Satin Black Powder Coat options

Fitment: Kawasaki KLR 650 2022+2024

Compatible with T-Rex Crash bars with small mod, grind 2 small semi-circle reliefs as shown in the photo below.

Installation video

"

Here's a nice video (below) from a customer who installed the crash bars and skid plate at the same time.  When installing the SRC crash bars with SRC skid plate, use the brackets and bolts that come with the skid plate as shown in the video below beginning at around the 3:00 minute mark.  

And here's another customer video showing the install of the SRC skid plate and SRC crash bars. It's an older video, so it shows the earlier version of the crash bars that do not have the urethane isolation bushings, but it does have some helpful information. 

 * Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Cargo Rack 2015-2019 KAWASAKI VERSYS 650

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight and lots of openings for bungee cords and strapping. 

The unique SRC 2 part design incorporates a stainless steel subframe base extension (shown raw in this image, but is black with the black rack and silver with the silver racks) and a 3mm thick aluminum main base platform for increased durability and load capacity of 22 lbs / 10 Kg. 

Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation 

NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is NOT included and is no longer available.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Crash Bar Set KAWASAKI VERSYS 1000 - 2019 to 2022

 Black has sold out and is no longer available.

• Available Electropolished  304Stainless Steel silver or Satin Black Powder Coat steel  
• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
• CNC Laser cut bracketry and mounts for a precise fit

PRODUCT INSTRUCTIONS LOCATED HERE 

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.