Fits Kawasaki Versys 650

This is the dual lock version of our SRC headlight guard.  For the pin and grommet version check out this link.

• Constructed of 2mm stainless steel sheet
• Available in natural stainless silver or satin black powder coat 
• Powerful 3M Dual Lock adhesive mounting system for quick and easy install and removal for clean up. 

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Wide Foot Peg Adaptors for Kawasaki Versys 300/650/1000

Kit includes a pair of wide peg adapters that bolt onto the stock peg. 

Fits all: 2017-2023

• Kawasaki Versys X300
• Kawasaki Versys 650  
• Kawasaki Versys 1000 

If you've never run a wider high-quality footpeg, you will be pleasantly surprised by the improvement this inexpensive and easy to install upgrade will make! Upgrading to a wider platform footpeg makes a dramatic improvement in comfort as well as greatly improving grip in wet muddy conditions. Our peg adaptors are a great value and easy to install.

It only takes about 10 minutes to install with common hand tools. The additional width and aggressive tooth profile offer more contact surface to reduce foot arch strain and improve grip. The wide platform and increased contact points will improve rider confidence in sketchy situations!

• Made of Stainless Steel
• Developed for off-road use
• 55mm wide and 90mm long

When installing, make sure to snug up the bolts and use Locktite blue, use caution not to overtighten.

Installation instructions can be downloaded here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD FOR KAWASAKI VERSYS 650 2015-2021

• Constructed of 2mm stainless steel sheet
• Available in Natural Stainless Silver or Satin Black Powder Coat 
• Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

PLEASE NOTE! 

Late in 2024 DOUBLETAKE began to manufacture their own arms as RAM copied their rugged mirror idea and became a competitor. So DOUBLETAKE took the opportunity to further improve their product. That is what we have in stock. There are a few images shown with the old RAM parts, but the first image is what you will receive. 

Our kit includes  DoubleTakes full adapter kit to allow fitment to all adventure bikes. 

• This kit fits almost any motorcycle make and model - Each pair comes with a Universal Adapter Kit which includes two 10 x 1.25mm Extensions, two 10 x 1.5mm BMW adapters, and one Reverse-Thread Adapter. 

• Here is a quick list:
• HONDA: 250L, Rally, CB500X, NC750, Africa Twins
• KAWASAK: 300X Versys, Versys 650, Versys 1000
• KTM: All adventure models
• SUZUKI: V-Strom 650, V-Strom 1000
• TRIUMPH: Tigers
• Royal Enfield: Himalayan
  
• DUCATI: Multistrada
• BETA: 500RR-S
• BMW: 310 GS, 310 R, 800 GS, 1200 GS, 1200 GS
• YAMAHA: FJ-09, Tenere 700
• And many more!

Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable DoubleTake ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion.  We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility are most important to us and that's why we run the DOUBLETAKE ADVENTURE mirrors on all of our bikes. 

Kit includes:  2 mirrors, 2 - 6" arms, 2 - 1" ball mounts, and thread adapters for your bike if needed, a small tube of Loctite thread locker (SRC exclusive!) Apply thread locker to adapter and ball mount threads to prevent your mirrors from vibrating loose.  Everything you need to install them in just a few minutes on most bikes!  

Install Tip: We recommend using one of the extension arms tightly clamped onto the ball mount to tighten the ball mount (and adapters if needed) into the mirror mounts of your bike.  

PS- If you are price shopping, please note that we include the correct adapters and spacers for the specific models below as well as Loctite thread locker to keep them from vibrating loose! 

Below is the DoubleTake Mirror inventors story of how the DoubleTakes came to be-

This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

# double take

The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

• Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
• Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
• Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
• Flexible front web conforms to your object.
• Robust dual torsion spring provides strong clamping force.
•  2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
• Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
• Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included.

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

The Rally Pro X-Strong is a durable injection-molded Nylon composite handguard that features an anodized aluminum bar for ultimate protection. It includes an indexed steel bar-end insert that mounts solidly and will not allow the guard to rotate in a crash. The included X-Strong mount kit allows the protection to be mounted to the handlebar with plenty of room for cables and brake lines. Optional spoilers are sold separately.

This is a universal part that fits most adventure motorcycles: Please note that some models with adjustable windscreens may need to have the windscreen in the forward-most location, such as the Royal Enfield Himalayan, to avoid contact at full lock. 

These are not compatible on Honda CB500X, NX500 and Honda Africa Twins.

PLEASE NOTE: Some OEM bars will require the removal of weighted bar ends and possibly other minor modifications to install handguards.  

For example- 

Choose from black, white or red colors.

View product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OS-STRAPS (pair)

Kriega OS-Straps

Fit: Upgrade alloy hooks for (pre-2012) US-10 and US-20 tailpacks or replacement fitting set for US-10, US-20 & US-30 DRYPACKS.  

FEATURES

Hook: Upgrade alloy hook straps for older generation US-10 and 20 packs (standard on post 2012 product). Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.

Fitting: NB - Some bikes already have web loops attached to the seat-pad/base. In this case we still recommend the fitting of the Kriega loops, as fitting to the subframe is far stronger than to the seat.

Remove bike seat and locate the best mounting areas on the rear subframe. It may be necessary to slot the internal plastic tray if no subframe metalwork is exposed. Attach the 4x 20mm web loops securely to high strength areas of the frame. The 20mm loops are adjustable in length. Final adjustments should be carried out with the seat/pad fitted. Once set, the web must be threaded back through the adjuster to lock-off the webbing. See the threading diagram on this page. To fit the US-pack, hook on the web loop, attach the top quick-release buckle and cinch down the bag on to the bike. Always use the 2 x strap keepers on the web to manage the loose ends. Please also ensure that the quick-release buckles are correctly 'clicked'

TECH-SPECS

• Custom 6061-T6 alloy hooks
• Multi-position: inline or across bike seat
• Easy on/off bike
• No loose straps left on bike
• Std. strap length 600mm
• 4 x Acetal ITW Airloc buckles
• 4 x 20mm sub-frame loops
• 10-year guarantee

WEIGHT: 200.00 Grams

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019) 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega US-30 Drypack

The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.

Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.

Features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• Acetal ITW Airloc buckles
• YKK water-resistant zips
• 6061-T6 alloy fitting hooks
• Side access zip pocket  (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• 1 x set US Alloy Hook Straps included
• 10-year guarantee
• 30-liter capacity 
• 445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)

OS-18 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs. 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-18 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

 MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks
• Mount directly to pannier frames  

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

SUBFRAME LOOP STRAPS

Provides a strong hook-on location to mount OS-ADVENTURE PACKS or US-DRYPACKS to most types of bike.

Get an extra set so you can quickly move your US Drypacsk to another bike etc. 

Simply thread around the bike subframe and back through the buckle. 

4 x 500mm (20") lengths of webbing with loop and buckle at one end. 

NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit. 

WEIGHT
50g

OS-12 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-12 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks  
  
• Mount to an OS-BASE as a side pannier or tail pack
  
• Mount as a tail pack with Kriega OS RACK LOOPS
  
• Hook on to an OS-32 pannier (front, rear or top)
• Mount directly to most front crash bars     
• Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

 An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

• 360(h) x 200(w) x 160(d) mm
• 14.2(h) x 7.9(w) x 6.3(d) ins.

CAPACITY: 12 Litres -732 cu in

WEIGHT: 850g - 30 oz

Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike. 

Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.

The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.

Kriega US-20 dry pack features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• 420D nylon ripstop - lightweight yet extremely strong
• 6061-T6 alloy fitting hooks
• Acetal ITW Airloc quick-release buckles
• YKK water-resistant zip on side pocket
• Side access zip pocket (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• US Alloy Hook Straps included
• 10-year guarantee
• 20-liter capacity     
• 15.7" H x 10.2" W x 7.5" D

KRIEGA LUGGAGE CAM STRAPS

A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.

Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.

1.5M  (5ft) long, high quality 1" webbing

Low weight - 1.7oz / 50g per strap

WEIGHT: 3.5oz - 100g

FEATURES

Pack

100% waterproof bolt-on waterproof fender pack made from 1000D Cordura. 2.5L (150 cu in) capacity – ideal for safety equipment, small tools, dry gloves, etc. Innovative ‘flush’ alloy fasteners included (see fitting).

Base

Ultra-tough Rhinotek fabric on base with 4 x heavy-duty rivets. All fasteners for dirtbike fender are included (see fitting). Pack also has a removable(hook and loop) waterproof liner for cleaning or replacement.

Fitting

Remove the white liner (hook and loop, top edge) and remove the bag from the packaging. Included with the Rally pack are 4 x alloy/stainless fasteners with nylon spacer washers. The product packaging is designed to used as a drilling guide.

Line up the guide on the rear fender and drill 4 x 6mm diameter holes. Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam). Tighten anti-clockwise and always use thread lock. Allow 24 hours to dry.

TECH-SPECS

• 2.5-litre (150 cu in) capacity
• 100% waterproof
• Hook and loop closure strap
• 4 x CNC 6061-T6 alloy fasteners
• 4 x Stainless steel fasteners
• 1000D Cordura
• RHINOTEK: abrasion-resistant fabric
• DRY PACK: taped-seam liner
• 10-year guarantee

DIMENSIONS

• 200(h) x 175(w) x 70(d) mm
• 7.9(h) x 6.9(w) x 2.7(d) ins.

WEIGHT

• 300 Grams

OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks  
  
• Mount to an OS-BASE as a side pannier or tail pack
  
• Mount as a tail pack with Kriega OS RACK LOOPS
  
• Hook on to an OS-32 pannier (front, rear or top)
• Mount directly to most front crash bars     
• Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

 An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

• 320(h) x 200(w) x 90(d) mm
• 12.5(h) x 7.9(w) x 3.5(d) ins.

CAPACITY: 6 Litres - 366 cu in

WEIGHT: 550g - 19.4 oz

Kriega US Alloy Hook Strap

The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.

Features:

• 1 x quick-release strap with alloy buckle
• Custom 6061-T6 CNC-milled aircraft grade alloy
• Easy on/off
• 600mm
• Does not include subframe loop

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega US-10 Drypack 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.

OS-STRAPS (pair)

Kriega OS-Straps

Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.

Features:

• Aluminum end hooks
• Nylon strapping
• Hypalon anti-marring tabs
• Sold as a pair

CLOSEOUT SALE!

THE VERSATILE ‘ACTIVE’ PACK FOR ROAD AND TRAIL

We love our R20's, they have a nice body-hugging contoured design that looks sharp and feel great. And the Quad-Loc harness system does a great job of distributing the load taking the stress off your shoulders that is so common on conventional backpack designs. It's the perfect size for day trips or for an extra 20L of storage on your longer adventures.  Although KRIEGA doesn't describe it as waterproof, we've never had any issues of our gear getting wet while riding in the rainy winters up here in the NW.   

The Kriega R20 motorcycle backpack is an ‘active’ riding pack with Kriega's unique QUADLOC-lite harness system. The harness is angled away from underarms for total freedom of movement and is exceptionally easy to use with none of the harness re-adjustment necessary on conventional riding/hiking packs.

The size adjustable harness allows the backpack position to be moved up or down to produce the best possible fit. The Kriega R20 can be worn with or without a waist strap. The waist strap is not really necessary for street riding

FEATURES  

The R20 incorporates a side pocket with water-resistant YKK® zip, along with an inner sleeve pocket and a key clip in the large main compartment. The pack is compatible with a CE-Level 2 back protector and hydration reservoir.

Designed and built with the highest quality materials, only Kriega offers an ergonomically perfect luggage solution that’s simple to use even in the thickest gloves, yet fully customizable to suit the most demanding of motorcyclists. 

TECH-SPECS

• Main compartment with YKK water-resistant zip
• Side access pocket with YKK water-resistant zip
• Internal hydration sleeve with compression
• Internal zipped mesh-pocket
• SUPERSPACE: 5mm airspace back.
• YKK water-resistant zips
• HYPALON: Abrasion resistant re-enforcement
• Scholler Dynatech With integrated 3M Scotchlite
• 420 D nylon RipStop: lightweight yet extremely strong
• 3M Scotchlite: reflective logo
• Unique QUADLOC harness: adjustable back length and total arm freedom
• Side access pocket
• Optional Kriega 3 Liter Hydrapak + Tube available (sold separately)
• Optional add on 5 or 10-liter drypacks
• Optional harness pocket
• Removable waist strap
• 10 year guarantee
• 20-liter capacity
• 470mm H x 280mm W x 150mm D (18.5" H x 11" W x 5.9" D)

WEIGHT
2.5 lbs  / 1150 Grams 

• Detergent based formula - no solvents or pumice.
• Drain friendly product and recyclable container!

• Removes virtually all substances, kills odor, moisturizes and repairs all without irritation.

OS-BOTTLE 

• • Ultra-tough Hypalon construction
  • Draw-string and compression strap retainer
  • Aircraft grade alloy buckles
  • Heavy-duty Acetal cam buckles
  • 10 YEAR GUARANTEE

TECH SPECS

DIMENSIONS

• 250(h) x 180(w) x 60(d) mm
• 8.2(h) x 6(w) x 2.3(d) ins.

WEIGHT: 375g - 13.2 oz

Unsure of what awesome moto accessories to give your favorite adventure rider? SRC MOTO is now offering gift cards! You can choose from several different card values, or if you don't see one you want, just contact us at info@srcmoto.com and we will create it for you.

SRC MOTO Gift Cards have no expiration date and can be redeemed at either of our online stores (Or if you catch us at an event!):

• SRC MOTO.com - www.srcmoto.com
• MOTO STUFF.com - www.motostuff.com

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

Congratulations, you found our shirts!

We made these logo t-shirts for our staff and based on requests for SRC apparel, we thought customers might like them too.  You can even tell people you are employed here but, if you show up wearing one at BackFire Station we might give you a nametag and put you to work. 

*Note our current batch of shirts does not have the USA Flag on the sleeve, as pictured.

Perfect weight, wrinkle-free, ring spun soft fabric great for casual wear and comfortable under your gear while riding, wrenching, or doing all the above.

Available in white or black. Sizing listed below. 

• 4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
• 1x1 rib knit neck
• Tear-away label
• Shoulder to shoulder taping

Men's sizes (chest size):

• M 38-40"
• L  41-43"
• XL 44-46"
• XXL 47-49
  

Women's sizes (chest size):

• S 25-26"
• M 37-38"
• L 39-41"
• XL 42-44"
• XXL 45-47

Care Instructions

Machine wash cold with like colors. Only non-chlorine bleach. Tumble dry low. Warm iron if necessary

Custom Liberty insulated water bottle (20oz) designed by SRC Team Member Caryn.

Topo graphics showing the region around Pendleton and some of our favorite riding spots!

What is Backfire Station?  Check out our Blog for a behind-the-scenes peak.

https://www.srcmoto.com/blogs/news/what-is-backfire-station

Converts a Kriega US-Drypack to a Tank Bag, compatible with US-5, US-10 & US-20 Drypacks plus OS-6 & OS-12 Adventure Packs.

• Universal fit to most makes and types of bikes including bikes with metal and plastic tanks.

• Easy to fit with frame loops at the front and hook & loop pads under the seat at the rear.

• A scratch-resistant base fabric that holds the pack firmly in position and quick-release buckles give easy access to fuel filler.

• Now with Cordura® fabric construction

• Reflective logo print

• Heavy-duty Velcro® fixing

• 10 YEAR GUARANTEE

FEATURES

WEIGHT: 250g / 8.8oz

PRODUCT CODE: KUSTK

OVERSTOCK SALE!

ROAM TOOL ROLL

Kriega OS-Rack loops