Kriega OS-Rack Loops

SRC Designs Full Rack System for the 2013-2020 CRF HONDA 250L & Rally 250L The SRC Rack is designed to allow access to the toolbox under the left side panel as can be seen in the images below. Also available with 1 gal / 3L fuel can and mount

This is the Adventure Rack System you want! 

Innovative modular design made of high-strength lightweight aluminum alloy. (Entire rack only weighs 4.8 lbs! )

The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)

The Full Rack System features: 

Top rack surface is 14" long and 10" wide at the front, tapering rearward to 8-1/2" The side racks increase the top surface width to 16" wide

Side rack surface is APPROXIMATELY 8" wide and 10" tall

• High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
• Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX) Although a ROTOPAX can be installed on the exterior sides., just not on the interior as shown as the ROTPAX is too wide. 
• Rear Cross Brace for increased rigidity in event of the inevitable tip over.
• Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
• The SRC Rack is designed to allow access to the tool box under the left side panel as can be seen in the images below.
• Center Tail Rack is nicely sized and shaped to fit the rear of the 2013-2020 250L & 2017-2020
• Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).  
• Not compatible with Yoshimura exhaust due to the Yoshimura side outlet tip. 

Powder-coated satin black for a long-lasting durable finish that looks great on the 250L!

Available add-ons include (See our site):

• MOTO STUFF Fuel can

Please Note: The CRF 250L/Rally specifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration. 

Here is a link to the PRODUCT INSTRUCTIONS for more information   NOTE: We recommend using blue thread locker on the fasteners.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs Aluminum Center Rear Cargo Rack - CRF HONDA 250L & Rally

Nicely sized and shaped to fit the rear of the 2013-2020 250l & Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located). 

Includes high-quality stainless steel mounting hardware, mounts utilize the existing steel subframe rack points (no drilling required), the installation guide is also included. 

Powder-coated satin black for a long-lasting durable finish that looks great on the 250l & Rally! 

Also available in an economy-minded steel version (3.9 lbs)  Please see this product on our site for more details.

Rack Dimensions: Approximately 14" long, 10" wide at the rear and tapering towards the front to 9" wide. 

Link to product instructions here 

NOTE: We recommend using blue thread locker on the fasteners.

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs Full Rack System with Gas Can for the 2013-2020 CRF HONDA 250L & Rally

This is the Adventure Rack System you want!

Innovative modular design made of high-strength lightweight aluminum alloy. (Entire rack only weighs 4.8 lbs! )

The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)

The Full Rack System + Gas Can features: 

Top rack surface is 14" long and 10" wide at the front, tapering rearward to 8-1/2" The side racks increase the top surface width to 16" wide

Side rack surface is APPROXIMATELY 8" wide and 10" tall

• High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
• Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX)
• Rear Cross Brace for increased rigidity in event of the inevitable tip over.
• Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
• Center tail rack is nicely sized and shaped to fit the rear of the 2013-2020 250L & 2017-2020 Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located). 
• Racks are powder-coated satin black for a long-lasting durable finish that looks great on the 250L and Rally!
• Gas Can is a rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack.  Includes quick-release mount and hardware that easily attaches to the inside of the left SRC pannier rack, which is pre-drilled for this mount.
• Not compatible with Yoshimura exhaust due to the side outlet design of the Yoshimura system

DOWNLOAD PRODUCT INSTRUCTIONS HERE  NOTE: We recommend using blue thread locker on the fasteners.

Please Note: The CRF 250L/Rally specifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

If you already have the SRC Tail rack (not compatible with other racks) you can upgrade at any time to the full system* with this easy to bolt-on kit. Works with both SRC steel and aluminum tail rack versions.

Kit contains a left and right pannier rack, rear cross brace, and attachment hardware. (the items in the red square boxes in the first image) 

NOTE: We recommend using blue thread locker on the fasteners.

*Complete rack or gas can is not included in this side rack upgrade. They are shown for reference only and available in the Racks and Luggage section of our website. 

Fits 2015-2024 CRF 250L & Rally and CRF 450L & RL models

• Not compatible with Yoshimura exhaust systems that use an angled outlet tip as it may cause issues with melting soft luggage unless a heat shield is installed. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega US-10 Drypack 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.