Crash Bar Set Honda NX500 E-Clutch 2026  

Available electropolished 304 stainless steel silver or satin black powder coat steel  

• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• CNC Laser cut bracketry and mounts for a precise fit
  
•  Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
  
• NOT COMPATIBLE with SW Motech skid plate and possibly others. We suggest checking the mounting instructions of both products to see if there is any obvious interference. Our SRC skidplate is designed to work in tandem with the SRC crash bars. 

A common question is “Can the SRC skid plate and SRC crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Brake Master Cylinder Guard Husqvarna Norden 901 

Fits: 2021 -2026 Husqvarna Norden 901

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Easy install with common hand tools.  

Available in natural stainless finish or satin black powder coat. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Crash Bar Set For The Kawasaki KLE 500 2026

• Available in electropolished 304 stainless steel silver or satin black powder coat steel  
  Stout 1" (25mm) tube with 1/8" (2mm ) wall thickness
  CNC Laser cut bracketry and mounts for a precise fit
  Crash bars are designed to prevent damage, reduce the impact without damaging the frame and engine.
• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are easily replaced if they are damaged in a tip-over
• Supplied with all stainless steel brackets & mounting hardware
• Easy to assemble, convenient, and fast

*Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Radiator Guards for Kawasaki KLE 500

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Available in Stainless Silver or Satin Black Powder Coat

Fitment - this product fits:

• 2025-2026 Kawasaki KLE 500

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD FOR 2026 Kawasaki KLE 500 
...............................................................................................
1. The Headlight Guard is Laser cut from 2 mm thick Stainless Steel
2. Compatible hardware and Bracketry for ease of fitment and mounting
3. Easy to remove the Head Light Guard from the Grommet mounts for cleaning inside
4. Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site
5. Fits for 2026 Kawasaki KLE 500

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Crash Bars with Integrated Skid Plate – Husqvarna Norden 901

Give your Norden comprehensive protection with the SRC Crash Bar and Engine Guard System. Designed to help protect the engine, bodywork, and other vulnerable components during low-speed falls and tip-overs, the system helps distribute impact across multiple mounting points.

The crash bars are constructed from stout 1-inch (25mm) DOM tubing with a 2mm wall thickness. CNC laser-cut brackets and precisely engineered mounting points provide a secure fit that complements the Norden’s distinctive styling.

An integrated lightweight aluminum skid plate provides added protection underneath the motorcycle while contributing to the system’s overall structural integrity. Routine oil and filter service can be performed without removing the crash bars or skid plate.

Replaceable heavy-duty impact pads are positioned at critical contact points. These sacrificial pads help protect the tubing from scratches during minor tip-overs and can be replaced individually if damaged.

Features:

• Fits 2022–2026 Husqvarna Norden 901

• Fits 2023–2026 Husqvarna Norden 901 Expedition

• Constructed from 1-inch (25mm) DOM tubing with a 2mm wall thickness

• Integrated lightweight aluminum skid plate

• Helps protect the engine, bodywork, and lower motorcycle components

• CNC laser-cut brackets and mounting hardware for precise fitment

• Replaceable impact pads at critical contact points

• Oil and filter service can be performed without removing the system

• Includes all necessary mounting hardware

• Installs with common hand tools in approximately one to two hours

• Installation video and assembly instructions are available from SRC Moto

Available finishes:

• Silver electropolished stainless steel — constructed from DOM stainless-steel tubing for excellent wear and corrosion resistance with a premium silver finish

• Black EDP and powder coat — constructed from strong DOM mild-steel tubing with a durable finish resistant to scratches and impacts

Rugged enough for serious adventure travel and refined enough to complement the premium design of the Norden 901, the SRC crash bar and skid plate system delivers integrated protection in a clean, purpose-built package.

Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Brake Fluid Reservoir Guard Husqvarna Norden 901 - 2021-2026

Protect the vulnerable plastic rear brake fluid reservoir with this burly stainless steel guard and prevent potential disaster from a simple tip-over in the desert or on rocky trails!

• Fits Husqvarna Norden 901 - 2021-2026
• Easy install with common hand tools
• Made from 2mm thick stainless steel material.
• Available in natural stainless finish or satin black powder coat

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made specifically for 2021-2026 Husqvarna Norden 901

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits 2021-2026  Husqvarna Norden 901

Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your Norden 901 / Expedition!  

This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe.  You can safely carry up to 35 lbs (16 Kg's) with this rack system. 

Rack is approximately 11"wide at the front and tapers to 8" in the rear, and is 11" long. 

No drilling or modifications required, easily mounts in under an hour with common hand tools. 

Installation video: 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits models: 

• 2024 + BMW R 1300 GS
  

Available in Brushed Stainless Steel finish or Satin Black Powder-coated steel 

• Constructed of 2mm stainless steel sheet
• Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning
• Developed for on and off-road use
• Includes all necessary mounting hardware and is easily installed with common hand tools. 

Installation instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CRASH BAR FOR THE BMW R 1300 GS

• Available in electropolished 304 stainless steel silver or satin black powder coat steel  
  Stout 1" (25mm) tube with 1/8" (2mm ) wall thickness
  CNC Laser cut bracketry and mounts for a precise fit
  Crash bars are designed to prevent damage, reduce the impact without damaging the frame and engine.
• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are easily replaced if they are damaged in a tip-over
• Supplied with all stainless steel brackets & mounting hardware
• Easy to assemble, convenient, and fast

Link to installation PDF guide here

*Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your R 1200 GS vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Available in Clear Anodized Brushed aluminum or Satin Black Powder coat aluminum
• Made of 11 gauge ( 1/8" / 3mm) thick  304 aluminum sheet with stainless hardware. 
• Developed for on and off-road use
• Fits BMW BMW R 1200 GS  years ​2013 to 2018
• Cutouts allow access to common service points without the need for removal of skid plate

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

PRODUCT INSTRUCTIONS AVAILABLE HERE

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.