Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for passenger to sit. The full version of the V1 top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics. This new rear rack (V2) with grab rails is great as it allows access to air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Pre-drilled for our 3L fuel can mount
Available in Satin Black powder coat
Fitment:
Yamaha Ténéré 700 years 2020 - 2024*
Black powder-coated aluminium
Laser cut 3.25mm aluminium plate
Light but super strong - only 1.3kg
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above the passenger seat (standard OEM seat)
Slotted all round to cater for plenty tie-down points
Pre-drilled to fit SRC 3 litre plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
Quick & easy fitment
Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts)
Made specifically for 2021-2024 Honda CRF 300L & Rally
Keeps your side stand from sinking into soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
Also available in a 1/2" taller version for bikes running taller suspension settings that can often cause the bike to lean over too far on the stand.
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Headlight Guard Royal Enfield HIMALAYAN
R-HM18-01-02
Regular price
$136.00
Sale price
$88.75
Save $47.25
Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light! Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.
Available in your choice of satin black powder coat laser cut 14 gauge steel or natural brushed stainless steel finish.
The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools!
Easily installed in just a few minutes with a Phillips screwdriver.
PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole. (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Fuel/Jerry Can and SRC Bracket kit for Royal Enfield Himalayan 2017-2021
R-HM18-28-02-L
Regular price
$138.00
Save $-138.00
Heavy-Duty Auxillary Fuel/Jerry Can Kits for HIMALAYAN
2017-2021 models
Purchase our pre-assembled kit and save $16 off of the individual parts cost!
The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100 miles range with SRC Auxiliary fuel can kits!
The SRC auxiliary fuel can bolts on using existing mounting points on the HIMALAYAN upper front cargo racks. Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service. Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing.
Please Note:Unlike competitor's kits, this kit is fully assembled and ready to install. We also apply a heavy-duty EPDM foam seating surface to prevent vibration and improve the functionality of the retention system.
Kit includes:
1 Himalayan-specific bracket (Select left or right side when ordering)
1- 3L (.8 gal) gas can with integrated spout and quick-release mount
Order 2 kits and install one on each side of the bike for 6 liters (1.6 gallons) of extra fuel!
MOTO STUFF Fuel cans are 10" tall, 8" wide, and 5" deep. A flexible spout is stored under the main cap.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Skid Plate Engine Guard HONDA CRF 300L 2021-2024
H-CRF300L-09-01-AL-1
Regular price
Sale price
$159.00
Save $-159.00
Protect your 300L's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware
Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in both Silver Aluminum and Satin Black Powder Coat options
The 300L Rally skid plate/Crashbar combo is available here.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Laser-cut 2 mm thick Stainless steel and symmetrical honey-comb design provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Top Rack Dimensions: 14" long, 10" wide at the front and tapering towards the rear to 9" wide.
Nicely sized and shaped to fit the rear of the 2021 300L & Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).
Includes high-quality stainless steel mounting hardware, mounts utilize the existing steel subframe rack points (no drilling required), the installation guide is also included.
Powder-coated satin black for a long-lasting durable finish that looks great on the 300L & Rally!
Also available in an economy-minded steel version (3.9 lbs) Please see this product on our site for more details.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.