Upper Crash Bar and Engine Guards for Ducati Desert X

Fits: Ducati Desert X 2022-2025 *

*(Does not fit the 2025 Desert X Rally, a new kit is in development with a May 2026 ETA) 

Protect your Desert X from damage with the SRC Crash Bar/Engine Guard. Easily installed in minutes with common hand tools.  

Constructed of strong yet lightweight Aluminum and processed in state-of-the-art laser cut and CNC bending machines.

• Available Electropolished Stainless Steel silver or Satin Black Powder Coat steel  
  
• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• Welded using TIG process and Shot blasted to remove all residual stresses, before surface protection process
• CNC Laser cut bracketry and mounts for a precise fit
  
• Sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
• Coating gives the Crash Bar adequate corrosion resistance to endure all weather conditions
• Includes Compatible Hardware, Bracketry, Sacrificial Slider Guards made out of Compression Molded Resin to give it strength and take the impact in the event of a fall (easier and economical to replace in the event of a tip over)

Installation PDF 

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE!

Fits: 2014 - 2020 DUCATI MULTISTRADA 950 / 1200 / 1260 

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.

• This protector made from 2 mm thick Stainless steel and Symmetrical Honey-comb design is Laser cut on State-of-the-art machines

• Can be easily mounted in a few minutes with common hand tools on the radiator 

• Available in brushed stainless steel or satin black powder-coat

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Radiator Guard for 2017-2021 BMW G 310 R

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector is made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  22 lb / 10Kg load capacity

The rack is 12" long and 12" at the front and tapers to 11" wide at the rear.

Available in satin black powder coat or clear anodized natural silver to prevent oxidation 

Available for model years:

• Option 1: 2014-2015  - Suzuki V-Strom 650
• Option 2: 2017-2021 - Suzuki V-Strom 650 -&-  2017-2020 - Suzuki V-Strom 1000

NOTE: Accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in some of the images) is NOT included and no longer available. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

NOTE: ORANGE BARS ARE A SPECIAL ORDER PRODUCT - Please email us at info@srcmoto.com for shipping timelines prior to placing order

Fits: KTM 790/890 ADV 2020-2022 

Does not fit 2023+ due to larger and lower fuel tanks 

Protect your KTM 790/890 Adv's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty crash bars & skid plate.

This crash bar is designed to prevent damage from falling, bumps as well

• Full lower crash bars plus skid plate - sold as a set

• Made from 1 ' thick Stainless steel tube 1.8 mm. Cut by modern laser machine and tube bender on CNC machine

• Tube wall thickness 2mm  

• Crash bars also house a 3mm stainless steel plate to protect fuel tank on both sides of the bike

• 4 x Main mounting points on each side of the bike for maximum strength

• Skid plate material - 4mm aircraft grade aluminum plate

• Beautiful and strong connection seams

• Available in powder-coated KTM Orange and electropolished Silver

• The shockproof cover helps to hold the crash bar and reduce impact from falling

• Supplied with all stainless steel brackets & mounting components 

• Easy to assemble, convenient, and fast, there is a manual for installation. And can be downloaded from the SRC website.

Installation instruction video

The unique SRC 2 part design incorporates a stainless steel subframe base extension (shown raw in this image, but is black with the black rack and silver with the silver racks) and a 3mm thick aluminum main base platform for increased durability and load capacity of 22 lbs / 10 Kg.  

The rack dimensions are approximately 12" wide at the front, 6" wide at the rear, and 13" long.

Lots of openings for strapping and bungee cords. 

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight.  This rack also includes stainless steel support brackets and is rated for up to 20 lbs of gear. 

Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation 

Choose between versions that fit:

• 2015 to 2018
• 2019 to 2021

NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is NOT included and is no longer available. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.

• This protector made of stainless steel sheet 304 grade 1.5 mm thickness
• Can be easily mounted in a few minutes with common hand tools on the radiator for BMW R 1200 GS 
• Available in  satin black powder-coat (silver sold out)

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits models: 

• 2013-2018 BMW R 1200
• 2019-2020 BMW 1250 GS

Choose between Natural Stainless Silver or Satin Black Powder Coat

• Constructed of 2mm stainless steel sheet
• Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
• Developed for on and off-road use

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits: 2014 - 2020 DUCATI MULTISTRADA 950 / 1200 / 1260 

Robust enough to protect the vulnerable and expensive oil cooler against flying stones and other debris.

• This protector made from 2 mm thick Stainless steel and Symmetrical Honey-comb design is Laser cut on State-of-the-art machines

• Can be easily mounted in a few minutes with common hand tools on the radiator 

• Available in brushed stainless steel or satin black powder-coat

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSE OUT!

Fits- KTM 790/890 ADV 2020-23'

• Made out of 3 mm (1/8") thick Aluminum material and Laser cut to precision
• Cargo Bags can be easily tied-up through the Slots provided on the Front and Back side. 
• Compatible Hardware and Bracketry for easy mounting.
• Gussets are welded with parity to the parent material and Powder coated to prevent corrosion.
• Quick, easy, and DIY fitment 
• Rack Surface is 12" wide at the front, tapering to 9" at the back, and 10" long. 
• Rear rack plate is mounted onto bike using a 3mm stainless steel sub bracket unit that is super strong
• Note: This rear rack does not have any pre drilled mounting holes for Kappa, GIVI or Monokey hard cases.

Available in Satin Black powder coat or clear anodized silver:  Please note, the Silver rack only has the aluminum top cargo rack portion in silver as the tube frame is made of carbon steel and is powder-coated black satin. 

5.25lbs

Fitment: KTM 790/890 ADV 2020-23'

Installation instructions and VIDEO

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Available in Brushed Stainless Steel finish or Satin Black Powder coat steel 
- Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens 
- Developed for on or off-road use

Fits BMW G 310 R 2017-2021

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect your Desert X's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.

(Please note that the installed images show the full upper and lower kit, this product is just the lower bras and skid plate as shown in the first image)

Fitment: Ducati Desert X 2022+2025

• Made of 4mm thick aerospace-grade aluminum sheet with stainless hardware 
• Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for the removal of skid plate
• Compatible with SRC Crash Bars (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)

Available in both Silver Aluminum and Satin Black Powder Coat options

INSTALLATION  INSTRUCTIONS PDF

 * Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits Kawasaki Versys 650

This is the dual lock version of our SRC headlight guard.  For the pin and grommet version check out this link.

• Constructed of 2mm stainless steel sheet
• Available in natural stainless silver or satin black powder coat 
• Powerful 3M Dual Lock adhesive mounting system for quick and easy install and removal for clean up. 

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

Fits Kawasaki Versys 1000

• Constructed of 2mm stainless steel sheet
• Available in natural stainless silver or satin black powder coat 
• Powerful 3M Dual Lock adhesive mounting system for quick and easy install and removal for clean up. 

Choose between versions that fit:

• 2015 to 2018
• 2019 to 2021

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

GPS  / Phone Accessory Mounting Bar 2014 - 2015 HONDA NC750

Available in Satin finish stainless steel silver or satin black powder coat.

The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your bike. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.

The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a  common 7/8" clamp.

Fits Honda NC750 2014 - 2015

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Headlight Guard TRIUMPH TIGER SPORT 660 2022-2025

- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT! 

Protect your R 1200 GS vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Available in Clear Anodized Brushed aluminum or Satin Black Powder coat aluminum
• Made of 11 gauge ( 1/8" / 3mm) thick  304 aluminum sheet with stainless hardware. 
• Developed for on and off-road use
• Fits BMW BMW R 1200 GS  years ​2013 to 2018
• Cutouts allow access to common service points without the need for removal of skid plate

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

PRODUCT INSTRUCTIONS AVAILABLE HERE

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.