Radiator Guard HONDA NX500

Fits HONDA NX500 2025

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Installation instructions 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs Side stand/Kickstand foot enlarger for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Keeps your side stand from sinking into soft ground & hot pavement! 

• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

The SRC large side stand base extension (doubles the surface area) installs easily and improves your parking experience when off pavement with your bike.

• Made of laser-cut stainless steel sheet 304 grade 3 mm thickness
• Stainless bolts and locknuts
• Easy installation

Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2020 - 2025

The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  This rack also includes stainless steel support brackets and is rated for up to 22 lbs  (10 Kg) of gear. 

Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1  top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics.

This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.

Pre-drilled for our 3L fuel can mount

Available in Satin Black powder coat

Fitment:

• Yamaha Ténéré 700 years 2020 - 2025
• • Black powder-coated 3.25mm aluminium top plate
    
  • 25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution.  Plus acts as much much-needed grab handle!
  • Fits to 4 x existing mounting points on rear of bike
  • Supplied with 4 x stainless steel standoffs to replace existing OEM units 
  • Includes all stainless steel mounting bolts & counter-sunk washers
  • Flat section of the rack sits  approximately 10mm above the passenger seat (standard OEM seat)
  • Slotted all around to cater for plenty of tie-down points
  • Pre-drilled to fit SRC 3 liter plastic fuel tank
  • Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
  • Quick & easy fitment
    
  
  

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

Black has sold out. 

SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel. 

• Crafted out of 2 mm thick aircraft fuselage grade stainless steel
• Laser-cut, CNC bent on state-of-the-art machines
  
• Easy 5-minute install using the stock fasteners and common hand tools
• Available in natural silver stainless finish or black powder-coated

Product installation information can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect the vulnerable plastic rear brake fluid reservoir with this burly stainless steel guard and prevent potential disaster from a simple tip over in the desert or rocky trail!

ATTENTION!  Please check your bike before ordering. Some models have the mounting bolt at the rear and others have the mountain bolt on the front side

• Left (rear) mounting or right (front) mounting position
• Natural stainless finish or satin black powder coat

Fits HONDA AFRICA TWIN models with either the left mounted or right mounted Rear Brake Fluid Reservoir. 

Easy install with common hand tools.  

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.

However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! (black is sold out)

SRC DESIGNS GPS bracket bar for the Kawasaki Versys 1000/ STAINLESS STEEL.

The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your Kawasaki Versys 1000. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.

The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.

Choose between versions that fit:

• 2015 to 2018 - PRODUCT INSTRUCTIONS AVAILABLE HERE

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT!

Exhaust Heat Guard Kawasaki KLX300 R

• Available in both Stainless Steel and Satin Black Powder Coat options.
• Protect the vulnerable header pipe from road debris, rocks and tip over impacts and reduce burns on your leg in tipovers with the SRC Header pipe guard.
• Made of 2mm stainless steel sheet and held securely in place with low profile stainless steel band clamps. 
• Cut-outs across the length of the Guard, ensures light weight and at the same provides Air cooling to subside the Heat/Radiation out of the Header pipe
• Anodized to improve the Corrosion Resistance and Hardness of Surface and Sub-surface
• Easy to install using Steel Band clamps with common hand tools and provides years of protection.

Fitment includes:

2021-2025 Kawasaki KLX 140 / 150 / 230 / 250 / 300R

Installation instructions

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

Fits 2019-2023  HONDA ADV150

Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your ADV150!  

This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe.  You can safely carry up to 35 lbs  (16 Kg's) with this rack system. 

Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long. 

No drilling or modifications required, easily mounts in under an hour with common hand tools. 

Installation video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

ADV 150

Crash Bar Set 2019-2023 HONDA ADV150 

• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• CNC Laser cut bracketry and mounts for a precise fit
  
•  Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Installation instructions 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

ADV 150

Silver is on CLOSEOUT SALE! 

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow. Standard protection version. We also offer an upgraded V2 version with left and right wing extensions that provide added protection for the waterpump and hoses on the right side and the ignition cover on the left side.  It's available here on the website. 

Fits Yamaha Ténéré 700 years 2022-2025 (and all Euro 5 exhaust models)

This skid plate is compatible with SRC lower crash bars. 

Protect your  T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed aluminum steel or satin black powder-coat aluminum

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD FOR HONDA AFRICA TWIN & ADVENTURE SPORT

Choose your bike model:

CLOSEOUT SALE! 

• AFRICA TWIN 2016 - 2019
• AFRICA TWIN ADVENTURE SPORT  2018 - 2019

Choose your color: Available in natural stainless silver or Satin Black Powder Coat 

• Constructed of 2mm stainless steel sheet
• Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
• Developed for on and off-road use

Product instructions:

• Link to product instructions for HONDA CRF 1000L here
• Link to product instructions for HONDA Africa Twin Adventure sport  here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

Radiator Guards HONDA AFRICA TWIN & ADVENTURE SPORT

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector is made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Choose between:

• Stainless Silver
• Satin Black Powder Coat 

Choose your model:

• HONDA AFRICA TWIN 2016-2020 models
• ADVENTURE SPORT 2018-2020 models

Product Information:

• Link to product instructions for HONDA AFRICA TWIN here
• Link to product instructions for ADVENTURE SPORT here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT!

Made specific for 2016-2020 Honda Africa Twin  

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE 

Save $50 limited to stock on hand

 SRC Designs Full Rack System with Gas Can for the 2013-2020 CRF HONDA 250L & Rally

This is the Adventure Rack System you want!

Innovative modular design made of high-strength lightweight aluminum alloy. (Entire rack only weighs 4.8 lbs! )

The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)

The Full Rack System + Gas Can features: 

Top rack surface is 14" long and 10" wide at the front, tapering rearward to 8-1/2" The side racks increase the top surface width to 16" wide

Side rack surface is APPROXIMATELY 8" wide and 10" tall

• High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
• Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX)
• Rear Cross Brace for increased rigidity in event of the inevitable tip over.
• Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
• Center tail rack is nicely sized and shaped to fit the rear of the 2013-2020 250L & 2017-2020 Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located). 
• Racks are powder-coated satin black for a long-lasting durable finish that looks great on the 250L and Rally!
• Gas Can is a rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack.  Includes quick-release mount and hardware that easily attaches to the inside of the left SRC pannier rack, which is pre-drilled for this mount.
• Not compatible with Yoshimura exhaust due to the side outlet design of the Yoshimura system

DOWNLOAD PRODUCT INSTRUCTIONS HERE  NOTE: We recommend using blue thread locker on the fasteners.

Please Note: The CRF 250L/Rally specifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

Black is sold out

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2019 - 2021*

Does not fit 2022-2023 or models equipped with E5 catalytic converter

Protect your  Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed stainless steel or satin black powder-coat

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Installation PDF 

SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2021-2025 Version 1 (V1) 

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  This rack also includes stainless steel support brackets and is rated for up to 22 lbs  (10 Kg) of gear. 

• Black powder coated aluminium
• Laser cut 3.25mm aluminium plate 
• Light but super strong - only 1.3kg 
• Fits to 4 x existing mounting points on rear of bike
• Supplied with 4 x stainless steel standoffs to replace existing OEM units 
• Includes all stainless steel mounting bolts & counter-sunk washers
• Flat section of the rack sits  approximately 10mm above passenger seat (standard OEM seat)
• Slotted all round to cater for plenty tie down points
• Pre drilled to fit SRC 3 litre plastic fuel tank
• Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
• Quick & easy fitment
• Please note this rack will not fit with the rally seat 
• Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts) 

The top rack is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the rack fits over the passenger seat so no place for a passenger to sit. The top rack with side racks is good for riders that have soft luggage and side racks are slightly raised off the side with rubber stands-offs so they stop potential damage caused by luggage rubbing on the plastics. The new rear rack V2 with grab rails  (available here) is great as it allows access to air filter & electrics etc. without the need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at the rear of the bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of the bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.

Fitment:

• Yamaha Ténéré 700 years 2020 - 2023*

• *Not compatible with optional rally seat

Installation instructions and video*

Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the brake fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools.  Don't risk being stranded with no brakes! 

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state of the art laser cut and CNC bending machines

Product Instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made specifically for the KAWASAKI VERSYS 1000

• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

Choose between versions that fit:

• 2015 to 2018
• 2019 to 2021

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect the vulnerable plastic rear brake fluid reservoir with this burly stainless steel guard and prevent potential disaster from a simple tip over in the desert or rocky trail!

• Fits SUZUKI V-STROM 1000 2015 -2019
• Easy install with common hand tools 
• Available in natural stainless finish or satin black powder coat

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE!  

Center Stand Guard for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the underside of your Multistrada from damage with the SRC Center Stand Guard. Easily installed in minutes with common hand tools.  

Constructed of strong yet lightweight Aluminum and processed in state-of-the-art laser cut and CNC bending machines.

Customer input from Troy S. "This skid plate extender is perfect as there was a significant gap in coverage, leaving the rear header pipe completely exposed. This Center Stand Plate covers it giving more assurance I will not destroy the pipe as I surmount large logs, rocks, and berms."

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Clutch Reservoir Cover for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the clutch fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools.  Don't risk being stranded with no brakes! 

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state-of-the-art laser cut and CNC bending machines

Available in your choice of satin black powder coat or natural brushed stainless steel finish.  

Product installation info available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSE OUT SALE!

Head Light Guard SUZUKI V-STROM 1000 for 2017-2019

• Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens 
• Developed for on or off-road use
• Includes all necessary mounting hardware and is easily installed with common hand tools

Available in brushed stainless steel finish or satin black powder coat steel 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

TOP CASE RACK FOR BMW G310 GS 2017-2025

SRC DESIGN Cargo Racks* are made of lightweight strong 3mm aluminum alloy plate for an optimal balance of strength to weight. CAD designed and manufactured for a sleek and precise fit to match the rear profile of your bike and provide generous surface footprint with an abundance of attachment points for hooks, straps, and packs. 

Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation.

Please note: Accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Case shown in the images is not included with this product but is available as well.  If this is needed, please see this add-on product on our site: "Quick-release mounts" 

Link to product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits all 2014 -2020 R 1200 GS Models - except lowered models.

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

The SRC large side stand base extension (doubles the surface area) installs easily and improves your parking experience when off pavement with your bike.

• Made of laser-cut stainless steel sheet 304 grade 3 mm thickness
• Stainless bolts and locknuts
• Easy installation

Installation instructions and video

CLOSEOUT SALE! 

SRC HEADLIGHT GUARD HONDA NC750

- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

Choose between these options:

• 2012-2015 (Black or Silver)
  
• 2016-2020 (Black or Silver)
  

Link to product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

HEADLIGHT GUARD fits 2016-2018 HONDA CB500X
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Developed for on and off-road use

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD FOR KAWASAKI VERSYS 650 2015-2021

• Constructed of 2mm stainless steel sheet
• Available in Natural Stainless Silver or Satin Black Powder Coat 
• Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits: AFRICA TWIN 2016 - 2020 & ADVENTURE SPORT MODELS

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  22 lbs / 10 Kg load capacity

Available in satin black powder coat or clear anodized natural silver to prevent oxidation 

• Link to Africa Twin CRF1000L product instructions here
• Link to Africa Twin Adventure Sport product instructions here

NOTE: These designs do not support Givi, KAPPA type boxes (Drilling holes would be needed, and add-on hardware purchased

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE!

ROAM TOOL ROLL

OVER STOCK SALE!

Your Desert X comes with beautiful headlights that put out a decent swath of light!  Protect them from road debris impact damage with the SRC Designs Headlamp guard kit.

Fits: Ducati Desert X 2022 - 2025

Available in your choice of satin black powder coat or natural brushed stainless steel finish.   

The SRC headlight guard provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools! 

Product installation info located here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the front brake caliper from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools.  Don't risk being stranded with no brakes! 

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state of the art laser cut and CNC bending machines. Anodized for improved corrosion resistance

Installed quickly using common handtools.

Available in your choice of satin black powder coat or natural brushed stainless steel finish. 

Price is per pair

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits: KAWASAKI VERSYS 1000 models

Protect the vulnerable ABS Sensors from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 2mm stainless. 

• Kit includes front and rear guards
• Easy 5-minute install using the stock fasteners and common hand tools
• Available in natural silver stainless finish

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.