Crash Bar Set HONDA NC750X DCT 2022-2025

• Available electropolished 304 stainless steel silver or satin back powder coat steel
• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness, 5kg/11lbs
• CNC Laser cut bracketry and mounts for a precise fit
• Sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Link to Installation Instructions here

Link to Installation video here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

UPPER Crash Bar Set HONDA CB500X

*Note, full crash bars also available on our website.

Not compatible with Rally Raid skid plate

Choose between:

• HONDA CB500X 2019 - 2023 (Black or Silver) 
  
• Does not fit the 2024+ NX 500

Available electropolished 304 stainless steel silver or satin black powder coat steel  

• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• CNC Laser cut bracketry and mounts for a precise fit
  
•  Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Installation instructions 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Crash Bar Set HONDA NX500 2024 - 2025 

Available electropolished 304 stainless steel silver or satin black powder coat steel  

• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
  
• CNC Laser cut bracketry and mounts for a precise fit
  
•  Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
  

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

PDF Installation instructions 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Radiator Guard HONDA NX500

Fits HONDA NX500 2025

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Installation instructions 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEADLIGHT GUARD 2024-2025 HONDA NX500
- Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat 
- Pin & Grommet Style Mounting allows for quick tool-free  removal for cleaning
- Developed for on and off-road use

Installation instructions

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

Crash Bars / Engine Guards 2017-2023 Royal Enfield Himalayan and SCRAM 411 with lower cross bar engine protection.

• Available electropolished 304 stainless steel silver or satin black powder coat steel  
• Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
• CNC Laser cut bracketry and mounts for a precise fit
• Sacrificial heavy-duty delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
• The design of this V2  guard set with lower engine cross guards requires the right bar to be loosened for clearance of oil cover bolt removal for filter change.

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Product instructions located here

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.

However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Radiator Guards for HONDA NC750 2022-2025

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of stainless steel sheet 304 grade 1.5 mm thickness
- Can be easily mounted in a few minutes with common hand tools 

Available in Stainless Silver or Satin Black Powder Coat

Fitment - this product fits:

• Honda NC750X 2022-2025

Link to product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Product instructions located here

Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light!  Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.

Available in black powder coat laser cut 14 gauge steel.

The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools! 

Easily installed in just a few minutes with a Phillips screwdriver. 

PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole.  (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)

* Note: SRC MOTO is located in Oregon which is one of the few US states without a state sales tax. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Product instructions PDF located here

Crash Bars / Engine Guards with integrated skid plate

2024-2025 Royal Enfield Himalayan 450 

• Integrated aluminum skid plate reduces weight and increases structural integrity
• Satin black powder coat steel  
• Stout 1" (25mm) tube with (2mm ) wall thickness
• CNC Laser cut bracketry and mounts for a precise fit
• Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over.
• it is not necessary to remove the crash bars or skid plate for oil change and filter replacement. There is room for clearance. 
• Weight 12lb 8 0zs - 6 kg
• Easily installed with common hand tools in 1-2 hours

* Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits 2024 to 2025 Royal Enfield Himalayan

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.
- This protector made of 2 mm stainless steel.
- Can be easily mounted in a few minutes with common hand tools.

A rock or stick puncture here could quickly drain the lifeblood of the engine, resulting in a seized motor in just a few minutes if it went unnoticed.  

Available in natural Stainless Steel or Black Satin Powder coat finishes. 

Product instructions located here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CRASH BAR FOR THE BMW R 1300 GS

• Available in electropolished 304 stainless steel silver or satin black powder coat steel  
  Stout 1" (25mm) tube with 1/8" (2mm ) wall thickness
  CNC Laser cut bracketry and mounts for a precise fit
  Crash bars are designed to prevent damage, reduce the impact without damaging the frame and engine.
• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are easily replaced if they are damaged in a tip-over
• Supplied with all stainless steel brackets & mounting hardware
• Easy to assemble, convenient, and fast

Link to installation PDF guide here

*Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Upper Crash Bars - 2023-2025 Honda TRANSALP

We also have the full set (skid plate with lower and upper crash bars) available here.

Protect your Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated skid plate for HONDA's all-new Transalp XR750.  

Upper Crash Bar Installation:  Printed Version 

The integrated design is lighter (just under 14 lbs) and stronger than conventional two-piece designs. 

• Crash bars made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender

• 4 x Main mounting points on each side of the bike for maximum strength

• Beautiful hand-laid TIG welds! 

• Available in black powder-coated and electropolished satin silver stainless steel

• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are easily replaced if they are damaged in a tip-over

• Supplied with all stainless steel brackets & mounting hardware

• Easy to assemble, convenient and fast. 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits models: 

• 2024 + BMW R 1300 GS
  

Available in Brushed Stainless Steel finish or Satin Black Powder-coated steel 

• Constructed of 2mm stainless steel sheet
• Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning
• Developed for on and off-road use
• Includes all necessary mounting hardware and is easily installed with common hand tools. 

Installation instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 Fits: Yamaha Tenere 700 

 2021 / 2022 / 2023 / 2024 / 2025

🔧 Superior Protection – Perfect Fit (Not compatible with SRC lower crash bars) 

💪 Technical Specifications

✔ Material: 4 mm Hard Aluminum (5083 grade)
✔ Weight: 3050 gr / 6.72 lbs
✔ Lower Section: Slippery, unbreakable plastic surface
✔ Extra Protection:

• Left side cover protection

• Suspension connection protection
  ✔ Ventilation Gaps: Optimized airflow for engine cooling
  ✔ Mounting: Fits original chassis mounting points – no drilling or cutting required
  ✔ Installation: Easy and quick setup

✨ Premium Look – Extreme Durability

Combines a rugged, adventure-ready design with a premium aesthetic.
Adds a stylish and solid appearance to your Tenere 700 while providing maximum underbody protection.

This newly redesigned bash plate for the 2025 Yamaha Tenere 700 offers improved clearance, enhanced durability, and a refined fit across all model years (2021–2025).
Protect your engine and suspension with confidence — wherever your adventure takes you.

* Note: SRC MOTO is located in Oregon, which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.