Protect your Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated skid plate for HONDA's all-new Transalp XR750.
Here is why you need to install protection now! That is
The integrated design is lighter (just under 24 lbs) and stronger than conventional two piece designs.
Full crash bars plus 4mm thick integrated aluminum skid plate - sold as a set
Made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender
Skid plate and crash bar design allows for oil change and filter replacement without removal and is compatible with the OEM and aftermarket center stands.
Crash bars also incorporate a 3mm (1/8") stainless steel skid plate to protect the vulnerable cast aluminum oil pan which hangs dangerously below the engine and is pretty much the lowest part of the bike!
4 x Main mounting points on each side of the bike for maximum strength
Beautiful hand-laid TIG welds!
Available in black powder-coated and electropolished satin silver stainless steel
The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are
easily replaced if they are damaged in a tip-over
Supplied with all stainless steel brackets & mounting hardware
Easy to assemble, convenient and fast.
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
The Rally Dual LED headlamp assembly is really cool. It's also $654 to replace......
Protect it from impact damage with the SRC Designs Headlamp guard kit. Laser-cut 14 gauge steel powder coated satin black provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Easy install with common hand tools.
Available in natural stainless finish or satin black powder coat.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Skid Plate Engine Guard HONDA CRF 300L 2021-2024
H-CRF300L-09-01-AL-1
Regular price
Sale price
$159.00
Save $-159.00
Protect your 300L's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 5mm thick aerospace-grade aluminum sheet with stainless hardware
Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in both Silver Aluminum and Satin Black Powder Coat options
The 300L Rally skid plate/Crashbar combo is available here.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Skid Plate and Engine Guard HONDA CRF 300L Rally 2021-2024
H-CRF300RL-V2-17-01
Regular price
$448.00
Save $-448.00
Protect your 300L Rally's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's innovative heavy-duty skid plate/crash bar combo!
In regards to a conventional full upper and lower crash bar set for the Rally, It’s SRC’s opinion that the upper front side fairing mount isn’t strong enough for a full crash bar set. The only upper attachment point is on the bikes Rally tower frame and any impacts to the crash bar would end up damaging the tower frame structure, so they developed this kit below. Plus in most falls, the end of the handlebar and footpeg hold the bodywork away from the ground.
To Clarify-
The commonly used upper front shroud point is part of the headlight and windscreen tower structure and it would be damaged in a light fall/tip over as it is of light metal construction.
Does not fit the 250L /
250L Rally models *see detail at the bottom of this page regarding installation on the 300L.
Stout 1" (25mm) drawn over mandrel crash bar tube (DOM) with 1/8" (3mm ) wall thickness
Skid plate is made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
* We have had inquiries about fitting this kit to the 300L, and it does fit, but be aware that the crash bars are positioned a couple of inches away from the motor to clear the Rally's bodywork. Here are a few photos from a customer that installed them on his new 300L recently.
Laser-cut 2 mm thick Stainless steel and symmetrical honey-comb design provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SRC Replacement Crash Bar Pads
P-PK-01-01
Regular price
$19.00
Save $-19.00
SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over. If you do happen to scratch one up, you can easily remove it and install a freshie!
These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter.
Please Note: These are not solid frame sliders. Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.
Price is per replacement pad. (order 1 pad, get 1 pad)
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.