Add some room for switches and electrical accessories in an ergonomically safe and accessible location around the perimeter of the stock instrument panel. Constructed of 16 gauge steel powder coated a nice satin black.
ABS Models, please note: You will have to relocate your ABS switch. Details in video at the bottom of this page.
To install, you'll need to remove the instrument panel. This is fairly easy. It takes about half an hour with common hand tools. We recommend watching our LED turn signal video as it clearly shows how to remove the windscreen, the headlight assembly and then you have easy access the 3 screws that hold the instrument panel in place as well as the wiring harness connector. With the panel removed, position the Rally Dash into place end then simply re-install the panel, headlight and windscreen and you are ready to wire up some switches and install your favorite electrical accessories!
ABS models will require you to relocate the ABS switch bracket.
The upper outlet port diameter is 1-1/8"
The lower switch ports are 1/2" diameter openings.
Note: The installed photo shows the product with the switches/chargers, these are not included with this Bare Dash Panel product.
Also available: Panel with water-resistant switches, 12-volt socket and Dual USB Charger See product on our site
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Aluminum Center Rear Cargo Rack Honda CRF 450 L & RL 2019-2024
H-CRF450RL-04-01-AL
Regular price
$168.00
Sale price
$128.00
Save $40.00
Aluminum Center Rear Cargo Rack - CRF 450 L & RL
Top rack surface dimensions are roughly 14” long and 9’ wide at the front, tapering to 8” at the rear.
Nicely sized and shaped to fit the rear of the Honda CRF 450RL and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).
Cargo Bags can be easily tied-up through the slots provided on the front and back side.
Made out of laser cut 3 mm thick Aluminum material. Includes high-quality stainless steel mounting hardware, mounts utilize the existing steel subframe rack points (no drilling required), the installation guide is also included.
Powder-coated satin black for a long-lasting durable finish that looks great.
Fitment Includes:
HONDA CRF 450L & RL 2019-2024
Installation PDF
NOTE: We recommend using blue thread locker on the fasteners.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Regular price
$7.95
Save $-7.95
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Ohlins Rear Shock for HONDA CRF 300L & Rally 2021-2024
HO 213
Regular price
$995.00
Save $-995.00
Ohlins STX46 Shock for 2021-2024 HONDA CRF 300L and 300L Rally The single biggest complaint from CRF 300l and Rally owners is that the suspension is sprung way too light and the damping is inadequate. The bike seems to be set up for a 100-pound beginner rider- Here's how to fix that. A heavier spring or adjusting the pre-loadwill not resolve the issue.
The shock comeswith a 95Nm spring best suited for riders 175-220 lbs and offers an additional 130 lbs capacity with pre load adjustment for gear or passenger.
Kit includes the shock with remote reservoir, reservoir mounting bracket that locates the reservoir on the top of the left engine case, just like the 250L. (this is shown in the video below)
PS- If you are installing the kit yourself, PLEASE NOTE!
We recently installed the kits on our Rally’s and noted 3 things that are sort of glossed over in the instructions.
1- When installing the rear shock, the remote reservoir line at the top of the shock must be oriented so the line is positioned towards the rear of the bike and the line routed around the left side of the shock towards the front of the bike where the reservoir mounts on the left side of the engine.
2-Removing the top shock bolt isn’t too hard, but re-installation takes 2 people. One to operate a ratchet installing the top shock bolt from the right side of the bike and a second person to position the nut in place from the left side of the bike using a magnetic pickup
tool or by taping the nut to the end of a screwdriver. The airbox/battery bracket is what’s in the way-
3- To remove the fork spring, you need to remove a steel retaining clip located inside the fork tube at the top of the spring. It takes 2 people to do this. One to use a flat blade screwdriver or similar tool to depress the spring a bit while the other person uses a dental pick or similar tool to pull the retainer clip out of the groove. There's not a lot of preload on the spring, so it's not dangerous, it's just a tight space that requires 3- 4 hands! :-)
The video below is for the 250 L & Rally, but the 300's are pretty much the same process.
OHLINS INSTALLATION VIDEO
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Himalayan Compact Engine Guards /Crash Bar kit
1990204
Regular price
$128.00
Sale price
$98.00
Save $30.00
Royal Enfield original equipment accessory
Also fits the SCRAM 411
Get full protection in a compact package without compromise. The compact engine guard is designed for an optimum balance of protection, ground clearance and style. Made with 22mm steel tube, it comes with dual coating for corrosion resistance. Instructions and
Material – Steel
Colour – Powder Coat Satin Black
Fits 2017-2023 Himalayan
Installation Time – 30 mins
Kriega Cam Straps
KACS150
Regular price
$22.50
Save $-22.50
KRIEGA LUGGAGE CAM STRAPS
A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.
Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.
1.5M (5ft) long, high quality 1" webbing
Low weight - 1.7oz / 50g per strap
WEIGHT: 3.5oz - 100g
Kriega US-20 Drypack Soft Luggage
KUSC20
Regular price
$195.00
Save $-195.00
Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.
Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.
The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.
*Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SRC Dash Bare Panel CRF 250L Rally
H-CRF17-21-02
Regular price
$75.00
Save $-75.00
SRC Bare Dash Panel 2017-2020 CRF 250L Rally
Add some room for switches and electrical accessories in an ergonomically safe and accessible location around the perimeter of the stock instrument panel. Constructed of 16 gauge steel powder coated a nice satin black.
To install, you'll need to remove the instrument panel. This is fairly easy. It takes about half an hour with common hand tools. We recommend watching our LED turn signal video as it clearly shows how to remove the windscreen, the headlight assembly and then you have easy access the 3 screws that hold the instrument panel in place as well as the wiring harness connector. With the panel removed, position the Rally Dash into place end then simply re-install the panel, headlight and windscreen and you are ready to wire up some switches and install your favorite electrical accessories!
The upper outlet port diameter is 1-1/8"
The lower switch ports are 1/2" diameter openings.
Note: The installed photo shows the product with the switches/chargers, these are not included with this Bare Dash Panel product.
Also available: Panel with water-resistant switches, 12-volt socket and Dual USB Charger for $228 - See product on our site
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side Stand / Kick stand foot enlarger KTM 390 Adventure 2020-2023
KTM390-14-01-SL
Regular price
$48.00
Save $-48.00
KTM 390 Adventure 2020-2023
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
Manufactured from 3 mm Stainless steel material and Laser
Assemblage includes a Stack of plates, non-corrosive screws and lock nuts
Surface is electro polished to improve its aesthetic appearance and removal of scratches
Keeps your side stand from sinking into soft ground & hot pavement!
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side stand / Kick stand foot enlarger - Yamaha Ténéré 700
Y-T700-14-01-SL
Regular price
$62.00
Save $-62.00
SRC Designs Side stand/Kickstand foot enlarger for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2023
Keeps your side stand from sinking into soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
The SRC large side stand base extension (doubles the surface area) installs easily and improves your parking experience when off pavement with your bike.
Made of laser-cut stainless steel sheet 304 grade 3 mm thickness
Stainless bolts and locknuts
Easy installation
Product installation instructions can be found here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Brake Fluid Reservoir Guard HONDA AFRICA TWIN (D)
H-AFT17-15-01-SL
Regular price
$35.00
Sale price
$21.50
Save $13.50
Protect the vulnerable plastic rear brake fluid reservoir with this burly stainless steel guard and prevent potential disaster from a simple tip over in the desert or rocky trail!
ATTENTION! Please check your bike before ordering. Some models have the mounting bolt at the rear and others have the mountain bolt on the front side
Left (rear) mounting or right (front) mounting position
Natural stainless finish or satin black powder coat
Fits HONDA AFRICA TWIN models with either the left mounted or right mounted Rear Brake Fluid Reservoir.
Easy install with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Frame Guard (LEFT) - Yamaha Ténéré 700
Y-T700-20-02
Regular price
Sale price
$48.00
Save $-48.00
SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2023
Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel.
Crafted out of 2 mm thick aircraft fuselage grade stainless steel
Laser-cut, CNC bent on state-of-the-art machines
Easy 5-minute install using the stock fasteners and common hand tools
Available in natural silver stainless finish or black powder-coated
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
GPS Phone Accessory Mount Bar SUZUKI V-STROM 650 & 1000 (D)
S-VS1000-07-02-SL(D)
Regular price
$57.00
Sale price
$39.50
Save $17.50
SRC DESIGNS GPS bracket bar mount for SUZUKI V-STROM 650 & 1000
Fits:
650 models 2017 to 2021
1000 models 2017 to 2019
The SRC DESIGNS GPS bracket bar gives you a solid attachment point on V-STROM. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.
The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Turn Signal Guards HONDA CB500X (D)
H-CB19-23-02
Regular price
$32.00
Sale price
$22.50
Save $9.50
Fits 2019-2020 HONDA CB500X (pair)
May fit other years, but we're not 100% sure as we had one customer that had turn signals that were about 1/2 an inch longer than the guard.
For reference, these are for 3-1/2" long signals as measured below.
Order 2 sets if you want to do front and rear.
Protect the vulnerable turn signals from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 1/8" (3mm) stainless.
Easy 5-minute install using the stock fasteners and common hand tools.
Choose between natural silver stainless or satin black powder coat finishes.
Sold as a pair
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowering Links by KOUBA for 2019-2022 HONDA CRF 450RL
CRF17-2
Regular price
$168.00
Save $-168.00
For some reason, the CRF 450L has a really tall seat height, especially for a smaller displacement bike. So we have some options to get your feet firmly back on the ground.
Built in Boise, IDAHO. Ridden and raced everywhere.
We are pleased to offer lowering links by KOUBALINK:
450L 1.5" Lowering Link: For the standard 2019-2024 CRF 450 L/RL, we have the KOUBALINK that lowers the bike 1-1/2"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander-S OS-22 Drypack Soft Luggage
KOS22
Regular price
$319.00
Save $-319.00
Kriega Overlander-S OS22 Drypack
DIMENSIONS 400(h) x 420(w) x 150(d) mm 15.7”(h) x 16.5”(w) x 5.9”(d)
(sold each, rigid platform mounts shown sold separately)
The OS-22 Soft Pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.
The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.
Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick-release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.
Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS STRAPS or as a single pannier by hooking-on to a specially designed OS Platform base. (both sold separately and available here on our site)
FEATURES
The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.
A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS Shoulder Strap can be hooked on to convert to a shoulder bag.
A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.
Hi-Vis details front and rear add an extra safety element for low light riding.
The OS-22 requires pannier frames to be fitted to the bike. These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.
Once fitted there are 2 options to fit the OS-22 1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS 2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform. Available here on our website.
GPS / PHONE Bracket Mount KAWASAKI VERSYS 1000 - 2015 to 2018 (D)
K-VS1000-07-01-SL
Regular price
$62.00
Sale price
$43.50
Save $18.50
SRC DESIGNS GPS bracket bar for the Kawasaki Versys 1000/ STAINLESS STEEL.
The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your Kawasaki Versys 1000. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.
The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SKID PLATE KAWASAKI VERSYS-X 300
K-X300-09-02-AL
Regular price
$235.50
Save $-235.50
Fits: KAWASAKI VERSYS-X 300 2017-2021
Protect your VERSYS vulnerable underside including the exhaust, oil cooler, side cases etc with SRC's heavy-duty skid plate.
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowered Seat HONDA CRF 300L
77200-K1T-E50ZA
Regular price
$348.00
Save $-348.00
Fits 2021-2024 300L & LS*
About 2" lower than stock seat on L models
1" lower on LS models
Available in Red or Black
For some reason, the CRF 300L and Rally's have really tall seat heights(over 35" and taller than the AFRICA TWIN!?! ), especially for a small displacement beginners bike.
So we have some options to get your feet firmly on the ground. We are pleased to offer these custom-shaped lowering seats that lower the seat height by about 2". These are brand new original HONDA seatsthat have been hand shaped and re-formed to reduce the seat height by about 2" There is still 1-1/2" of foam cushion in the main seating area, so normal ADV riding won't be an issue, but if you are a hard-charging off-roader frequently getting airborne, it might be a bit firm on some landings! :-)
These were developed after my wife was about to give up on her Rally as it was too tall for her. She is relatively new to offroad riding and really felt unsafe and uncomfortable on the Rally, especially when riding on sidehills and slippery surfaces where she was not able to touch the ground when needed. We had already installed a lowering link and that helped, but she wanted it lower to feel comfortable. So we gave one of these a try and she now loves her Rally! Easily installed in just a couple of minutes with common hand tools.
We often get further questions from customers: Here is our general response-
The cons of running a link are due to the geometry change in the suspension. In a nutshell, the bike becomes "choppered out" slightly. So the bike likes to go straight (improves straight-line stability), but when cornering on loose surfaces such as gravel roads or lose dirt, the bikes front end will have a bit more of a tendency to plow or push through corners. This is not noticeable on pavement and a beginner off road rider probably won't push the limits of traction enough to have it be an issue, but if you are an experienced off-road rider, you will most likely notice it.
In regards to seat comfort, we had to choose a compromise point that had decent comfort and still an effective seat height reduction. If you read through the reviews, you will see a couple of comments about reduced comfort. I generally tell people that you most likely won't notice it riding off-road where you are standing up intermittently, but if you are riding a couple hundred miles of pavement, then its surely to be noticeable.
Lastly, to simulate the ride height adjustment, find some lumber, bricks or something that you can easily stack up on both sides of the bike that you can rest your feet on that is the same height as the potential drop from the seat and link. That will give you a pretty good sense of how it will feel after the mods.
* These are brand new original HONDA seats that have been hand-shaped and re-formed to reduce the seat height by 2"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander-S OS-32 Drypack Soft Luggage
KOS32
Regular price
$345.00
Save $-345.00
Kriega Overlander-S OS32 Drypack
Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
(sold each, rigid platform mounts shown sold separately)
The Overlander-S series of roll-top, 100% waterproof bags feature semi-rigid walls for easy loading and shape retention. The OS-32 bags are intended as foundation saddlebags that readily accept the smaller bags within the series as modular tethers of supplemental storage. All OS-PACKS are 100% waterproof and constructed from ultra-abrasion resistant Hypalon and 1000D Cordura nylon that is ready to deal with the toughest of adventures.
Features:
100% waterproof construction
Semi-rigid wall panels retain shape when empty
Ultra-abrasion resistant Hypalon strapping
1000D Cordura nylon body construction
32 liter capacity ea.
Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
Sold each
DIMENSIONS 380(h) x 250(w) x 190(d) mm 14.9(h) x 9.8(w) x 7.5(d) ins.
CAPACITY 18 Litres -1100 cu in
WEIGHT 1000g - 35oz
FITTING OPTIONS
The OS-32 requires pannier frames to be fitted to the bike. These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.
Once fitted there are 2 options to fit the OS-32 1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS 2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. Available here on our website.
Regular price
$82.00
Sale price
$57.50
Save $24.50
GPS/Phone Accessory Mounting Bar for HONDA NC750
Fits Honda NC750 2016-2021
Available in Satin finish stainless steel silver or satin black powder coat.
The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your bike. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.
The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect your V-STROM's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate/ lower engine sump guard.
Is compatible with the stock center stand
Fits SUZUKI V-STROM 800DE 2024
Available in clear anodized brushed aluminum or satin black powder coat aluminum
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Save $-129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA OS-Bottle Holder
KOSBOT
Regular price
$75.00
Save $-75.00
OS-BOTTLE
The OS-Bottle is a versatile heavy-duty bottle holder. Hook-on to an OS-PANNIER, US-DRYPACK or TANK and you have easy access to 2 x 1 litre drink or fuel bottles. Max bottle size 80mm dia x 280mm long (3˝x 11˝)
FEATURES
• Ultra-tough Hypalon construction • Draw-string and compression strap retainer • Aircraft grade alloy buckles • Heavy-duty Acetal cam buckles • 10 YEAR GUARANTEE
TECH SPECS
DIMENSIONS
250(h) x 180(w) x 60(d) mm
8.2(h) x 6(w) x 2.3(d) ins.
WEIGHT: 375g - 13.2 oz
Ohlins Fork Spring Kit for HONDA CRF 300L & RALLY 2021-2024
FSK 167
Regular price
$259.00
Save $-259.00
The single biggest complaint from CRF 300L and Rally owners is that the suspension is sprung way too light and the damping is inadequate. The bike seems to be set up for a 100-pound beginner rider- Here's how to fix that. A heavier spring or adjusting the pre-loadwill not resolve the issue.
Front Fork kit fits 2021-2024 CRF 300L & Rally/Rally ABS The Fork kit comes with 3 springs, one light spring for 300L riders up to 175 lbs (7.5N/mm), one stiffer for 175+ 300L and Rally riders (8.5N/mm), the last hard spring for Rally riders (9.5N/mm). The kit also includes billet fork caps with integrated air bleeders to allow easy air bleed and keep your suspension nice and plush!
PLEASE NOTE! The CRF 300L and Rally models only have 1 fork spring and it is housed inside the right fork leg. Also, there is a single aluminum spring spacer included in the Ohlins fork spring kit, it goes on top of the right spring.
The CRF 300L Rally Recommended Fork oil volume (Use a good quality 30 wt. fluid for best results) Ohlins fluid is available here on our site.
Model
Damping Leg (right side)
Spring Leg (left side)
CRF250 Rally
670 cc
600 cc
CRF250 L
680 cc
650 cc
CRF300 L
595 cc
595 cc
CRF300 Rally
610 cc
555 cc
PS- If you are installing the kit yourself, PLEASE NOTE!
The kit comes with great instructions and there is an installation video below.
We recently installed the kits on our Rally’s and noted 3 things that are sort of glossed over in the instructions.
1-- To remove the fork spring, you need to remove a steel retaining clip located inside the fork tube at the top of the spring. It takes 2 people to do this. One to use a flat blade screwdriver or similar tool to depress the spring a bit while the other person uses a dental pick or similar tool to pull the retainer clip out of the groove. There's not a lot of preload on the spring, so it's not dangerous, it's just a tight space that requires 3- 4 hands! :-)
Please note, the video below is for the 250L & Rally, however the 300's are pretty much the same.
OHLINS INSTALLATION VIDEO
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
NOTE: This is a special order product, lead times are generally 4 to 6 weeks. You can order now and we will follow up with a more precise eta by email.
Protect the brake fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools. Don't risk being stranded with no brakes!
Constructed of strong yet lightweight 1/8" (3mm) thick 304 Aluminum
Available in brushed stainless steel or satin black powder-coat
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Tail Light Guard HONDA CRF 300L and Rally
H-CRF300L-33-01-SL
Regular price
$107.00
Sale price
$75.50
Save $31.50
Laser-cut high-grade stainless steel provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Available in powder coat black or natural silver
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowering Link YAMAHA TÉNÉRÉ 700
T700-2
Regular price
$119.00
Save $-119.00
Fits: 2021-2024 Yamaha TÉNÉRÉ 700.
T700-2 will lower the rear 1 inch
T700-3 will lower the rear 1.50 inches.
Reinforced for added strength/durability when adding weight.
Built in Boise, IDAHO. Ridden and raced everywhere.
Replaces Yamaha part # BW3-2217M-00-00
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Visit our Deals section
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.