OHLINS Rear Shock Spring Installation Service CRF 250L RALLY & 300L RALLY
springlabor
Regular price
$85.00
Save $-85.00
NOTE: CRF 300L SPRING SERVICE COMING SOON - OHLINS HAS NOT RELEASED HD SPRINGS FOR THE 300'S YET. Y
The 250L Rally spring service is currently available.
This is a labor service fee to have us install the HD spring for your 250L CRF Rally. This applies to the HD spring included with the Ohlins Rally shock or the Ohlins extra heavy-duty spring available separately.
We can install the Ohlins heavy spring or extra heavy spring on your Ohlins shock for $85 for you if you like.Add the spring install service to your cart and we will swap the springs (Only available for Rally models and when the shock and springs are purchased together), usually the same day you place your order, so there will be no delay in shipping.
Ohlins Fork Fluid - 1 Liter (2 required for a proper fluid service)
01330-01
Regular price
$29.95
Save $-29.95
OHLINS Fork Fluid Product Features:
Öhlins has developed high-quality oils for its fork spring kits. They include a range of fork oils which will increase the performance of original telescopic and upside-down forks. The different viscosities available make it possible to select the most suitable oil. (7.5W for 250L and 20W for the Rally)
What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved.
Note: 2 quarts/liters required to completely change the fluid
PLEASE NOTE! The CRF 250L and Rally models only have 1 fork spring and it is housed inside the right fork leg. Also, there is a single aluminum spring spacer included in the Ohlins fork spring kit, it is used on the standard 250L and goes on top of the right spring. It is not used on the Rally. This is covered in the provided instructions, but folks are overlooking it.
The CRF 250l & Rally Recommended Fork oil volume
Model
Damping Leg (right side)
Spring Leg (left side)
CRF250 Rally
670 cc
600 cc
CRF250 L
680 cc
650 cc
CRF300 L
595 cc
595 cc
CRF300 Rally
610 cc
555 cc
Oil recommendation can be found in the detail information for each Öhlins product.
Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside-down forks. The forks on the CRF 250L & Rally use OHINS No. 10 Fluid, part number 01314-01
What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved.
Available fork oil types are:
The CRF 250L Ohlins #5 (7SAE 5W)
Ohlins part number 01330-01
The 250 Rally and 300L use Ohlins #10 ( SAE 20 W) Ohlins part number 01314-01
The 300 Rally recommendation is 01314 and 01316 mixed at 1:1 ratio. The mix of these two oils equates to roughly SAE 30 W.
KRIEGA US-DRYPACK HOOK STRAP (Single)
KAMBS1S
Regular price
$16.00
Save $-16.00
Kriega US Alloy Hook Strap
The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.
Features:
1 x quick-release strap with alloy buckle
Custom 6061-T6 CNC-milled aircraft grade alloy
Easy on/off
600mm
Does not include subframe loop
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander OS-12 ADVENTURE PACK
KOS12
Regular price
$135.00
Save $-135.00
OS-12 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.
The 100% waterproof roll-top closure(removable white liner) guarantees pack contents remain protected from the elements.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.
A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-12 a very versatile pack.
The four Integrated loops on the base of each pack are designed to:
Mount directly to most rear racks
Mount to an OS-BASE as a side pannier or tail pack
Mount as a tail pack with Kriega OS RACK LOOPS
Hook on to an OS-32 pannier (front, rear or top)
Mount directly to most front crash bars
Mount as a tank bag with Kriega TANKor SUBFRAME LOOPS
An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)
TECH SPEC
DIMENSIONS
360(h) x 200(w) x 160(d) mm
14.2(h) x 7.9(w) x 6.3(d) ins.
CAPACITY: 12 Litres -732 cu in
WEIGHT: 850g - 30 oz
Kriega Overlander OS- PLATFORM 16-22mm Tube Fit
KOSPT-3
Regular price
$159.00
Save $-159.00
OS-PLATFORM 16-20MM TUBE FIT (sold individually)
TUBE FIT - all 16 - 20mm standard hoop pannier frames including ROYAL ENFIELD, TOURATECH, HEPCO & BECKER, GIVI, KTM, RALLYRAID PRODUCTS, SHIFT MANUFACTURING & METAL MULE
Virtually indestructible Nylon-6 Platform, lighter than alloy and without fatigue issues machined with optional attachment points enabling you to set-up the bike to suit your adventure. Compatible with OS and US KRIEGA bags as well as most others on the market.
FEATURES
• 10mm NYLON-6 construction. • CNC machined. • Includes fitting kit for 16mm - 20mm hoop frames. • Universal design, fits left or right side.
PLATFORM DIMENSIONS 390(w) x 300(h) x 10(d)mm 15.3"(w) x 11.8"(h) x 0.3"(d)
TOTAL WEIGHT 1200g / 42oz
SOLD INDIVIDUALLY
Pre Drilled for ROTOPAX mounts
Mount a single OS-SOFT PANNIER or a single 1.75 Rotopax™ fuel or water container.
Mount a OS-6 or OS-12ADVENTURE PACK with single or double 1-gallon Rotopax™ fuel/water containers.
Add some room for switches and electrical accessories in an ergonomically safe and accessible location around the perimeter of the stock instrument panel. Constructed of 16 gauge steel powder coated a nice satin black.
ABS Models, please note: You will have to relocate your ABS switch. Details in video at the bottom of this page.
To install, you'll need to remove the instrument panel. This is fairly easy. It takes about half an hour with common hand tools. We recommend watching our LED turn signal video as it clearly shows how to remove the windscreen, the headlight assembly and then you have easy access the 3 screws that hold the instrument panel in place as well as the wiring harness connector. With the panel removed, position the Rally Dash into place end then simply re-install the panel, headlight and windscreen and you are ready to wire up some switches and install your favorite electrical accessories!
ABS models will require you to relocate the ABS switch bracket.
The upper outlet port diameter is 1-1/8"
The lower switch ports are 1/2" diameter openings.
Note: The installed photo shows the product with the switches/chargers, these are not included with this Bare Dash Panel product.
Also available: Panel with water-resistant switches, 12-volt socket and Dual USB Charger See product on our site
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Regular price
$7.95
Save $-7.95
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Kriega Cam Straps
KACS150
Regular price
$22.50
Save $-22.50
KRIEGA LUGGAGE CAM STRAPS
A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.
Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.
1.5M (5ft) long, high quality 1" webbing
Low weight - 1.7oz / 50g per strap
WEIGHT: 3.5oz - 100g
Kriega US-20 Drypack Soft Luggage
KUSC20
Regular price
$195.00
Save $-195.00
Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.
Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.
The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.
Ohlins Rear Shock for HONDA CRF 300L & Rally 2021-2024
HO 213
Regular price
$995.00
Save $-995.00
Ohlins STX46 Shock for 2021-2024 HONDA CRF 300L and 300L Rally The single biggest complaint from CRF 300l and Rally owners is that the suspension is sprung way too light and the damping is inadequate. The bike seems to be set up for a 100-pound beginner rider- Here's how to fix that. A heavier spring or adjusting the pre-loadwill not resolve the issue.
The shock comeswith a 95Nm spring best suited for riders 175-220 lbs and offers an additional 130 lbs capacity with pre load adjustment for gear or passenger.
Kit includes the shock with remote reservoir, reservoir mounting bracket that locates the reservoir on the top of the left engine case, just like the 250L. (this is shown in the video below)
PS- If you are installing the kit yourself, PLEASE NOTE!
We recently installed the kits on our Rally’s and noted 3 things that are sort of glossed over in the instructions.
1- When installing the rear shock, the remote reservoir line at the top of the shock must be oriented so the line is positioned towards the rear of the bike and the line routed around the left side of the shock towards the front of the bike where the reservoir mounts on the left side of the engine.
2-Removing the top shock bolt isn’t too hard, but re-installation takes 2 people. One to operate a ratchet installing the top shock bolt from the right side of the bike and a second person to position the nut in place from the left side of the bike using a magnetic pickup
tool or by taping the nut to the end of a screwdriver. The airbox/battery bracket is what’s in the way-
3- To remove the fork spring, you need to remove a steel retaining clip located inside the fork tube at the top of the spring. It takes 2 people to do this. One to use a flat blade screwdriver or similar tool to depress the spring a bit while the other person uses a dental pick or similar tool to pull the retainer clip out of the groove. There's not a lot of preload on the spring, so it's not dangerous, it's just a tight space that requires 3- 4 hands! :-)
The video below is for the 250 L & Rally, but the 300's are pretty much the same process.
OHLINS INSTALLATION VIDEO
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander-S OS-22 Drypack Soft Luggage
KOS22
Regular price
$319.00
Save $-319.00
Kriega Overlander-S OS22 Drypack
DIMENSIONS 400(h) x 420(w) x 150(d) mm 15.7”(h) x 16.5”(w) x 5.9”(d)
(sold each, rigid platform mounts shown sold separately)
The OS-22 Soft Pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.
The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.
Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick-release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.
Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS STRAPS or as a single pannier by hooking-on to a specially designed OS Platform base. (both sold separately and available here on our site)
FEATURES
The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.
A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS Shoulder Strap can be hooked on to convert to a shoulder bag.
A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.
Hi-Vis details front and rear add an extra safety element for low light riding.
The OS-22 requires pannier frames to be fitted to the bike. These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.
Once fitted there are 2 options to fit the OS-22 1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS 2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform. Available here on our website.
Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
(sold each, rigid platform mounts shown sold separately)
The Overlander-S series of roll-top, 100% waterproof bags feature semi-rigid walls for easy loading and shape retention. The OS-32 bags are intended as foundation saddlebags that readily accept the smaller bags within the series as modular tethers of supplemental storage. All OS-PACKS are 100% waterproof and constructed from ultra-abrasion resistant Hypalon and 1000D Cordura nylon that is ready to deal with the toughest of adventures.
Features:
100% waterproof construction
Semi-rigid wall panels retain shape when empty
Ultra-abrasion resistant Hypalon strapping
1000D Cordura nylon body construction
32 liter capacity ea.
Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
Sold each
DIMENSIONS 380(h) x 250(w) x 190(d) mm 14.9(h) x 9.8(w) x 7.5(d) ins.
CAPACITY 18 Litres -1100 cu in
WEIGHT 1000g - 35oz
FITTING OPTIONS
The OS-32 requires pannier frames to be fitted to the bike. These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers.
Once fitted there are 2 options to fit the OS-32 1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS 2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. Available here on our website.
For some reason, the CRF 300L and Rally's have really tall seat heights(over 35" and taller than the AFRICA TWIN!?! ), especially for a small displacement beginners bike.
So we have some options to get your feet firmly on the ground. We are pleased to offer these custom-shaped lowering seats that lower the seat height by about 2". These are brand new original HONDA seatsthat have been hand shaped and re-formed to reduce the seat height by about 2" There is still 1-1/2" of foam cushion in the main seating area, so normal ADV riding won't be an issue, but if you are a hard-charging off-roader frequently getting airborne, it might be a bit firm on some landings! :-)
These were developed after my wife was about to give up on her Rally as it was too tall for her. She is relatively new to offroad riding and really felt unsafe and uncomfortable on the Rally, especially when riding on sidehills and slippery surfaces where she was not able to touch the ground when needed. We had already installed a lowering link and that helped, but she wanted it lower to feel comfortable. So we gave one of these a try and she now loves her Rally! Easily installed in just a couple of minutes with common hand tools.
We often get further questions from customers: Here is our general response-
The cons of running a link are due to the geometry change in the suspension. In a nutshell, the bike becomes "choppered out" slightly. So the bike likes to go straight (improves straight-line stability), but when cornering on loose surfaces such as gravel roads or lose dirt, the bikes front end will have a bit more of a tendency to plow or push through corners. This is not noticeable on pavement and a beginner off road rider probably won't push the limits of traction enough to have it be an issue, but if you are an experienced off-road rider, you will most likely notice it.
In regards to seat comfort, we had to choose a compromise point that had decent comfort and still an effective seat height reduction. If you read through the reviews, you will see a couple of comments about reduced comfort. I generally tell people that you most likely won't notice it riding off-road where you are standing up intermittently, but if you are riding a couple hundred miles of pavement, then its surely to be noticeable.
Lastly, to simulate the ride height adjustment, find some lumber, bricks or something that you can easily stack up on both sides of the bike that you can rest your feet on that is the same height as the potential drop from the seat and link. That will give you a pretty good sense of how it will feel after the mods.
* These are brand new original HONDA seats that have been hand-shaped and re-formed to reduce the seat height by 2"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Hippo Hands
BACKCOUNTRY
Regular price
$129.95
Save $-129.95
Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA OS-Bottle Holder
KOSBOT
Regular price
$75.00
Save $-75.00
OS-BOTTLE
The OS-Bottle is a versatile heavy-duty bottle holder. Hook-on to an OS-PANNIER, US-DRYPACK or TANK and you have easy access to 2 x 1 litre drink or fuel bottles. Max bottle size 80mm dia x 280mm long (3˝x 11˝)
FEATURES
• Ultra-tough Hypalon construction • Draw-string and compression strap retainer • Aircraft grade alloy buckles • Heavy-duty Acetal cam buckles • 10 YEAR GUARANTEE
TECH SPECS
DIMENSIONS
250(h) x 180(w) x 60(d) mm
8.2(h) x 6(w) x 2.3(d) ins.
WEIGHT: 375g - 13.2 oz
Tail Light Guard HONDA CRF 300L and Rally
H-CRF300L-33-01-SL
Regular price
$107.00
Sale price
$75.50
Save $31.50
Laser-cut high-grade stainless steel provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools.
Available in powder coat black or natural silver
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega US-10 Drypack Soft Luggage
KUSC10
Regular price
$132.50
Save $-132.50
Kriega US-10 Drypack
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.
The US-10 Drypack provides 10 liters of storage for those keep-dry essentials. Ideal for a full day on the bike when you may need to carry waterproofs, spares gloves or a tool kit.
FEATURES
Guaranteed 100% waterproof roll-top closure main compartment.
Universal-fit to any type of motorcycle.
Mount inline or across the seat / rear rack
Easy to fit with quick-release hooks attaching to web loops secured to the bike’s subframe.
Use individually or hook-on additional US-Drypacks to build your ideal luggage system up to 70 litres.
Side pocket and rear mesh pocket provide additional quick-access storage.
Use as a tank bag, with the addition of a Kriega TANK Converter.(Sold Separately)
Hook-on to most Kriega Back packs for additional waterproof storage. excluding Max28, Hydro-2
DIMENSIONS 330(h) x 240(w) x 120(d)mm 13”(h) x 9.4”(w) x 4.7”(d)
VOLUME 10-Litres (600cu in) capacity
WEIGHT 500g / 17.6oz
Kriega OS-STRAPS
KOSS
Regular price
$55.00
Save $-55.00
OS-STRAPS (pair)
Kriega OS-Straps
Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.
Features:
Aluminum end hooks
Nylon strapping
Hypalon anti-marring tabs
Sold as a pair
KRIEGA TRAIL9 ADVENTURE BACKPACK
KRUT9-L lime
Regular price
$179.00
Save $-179.00
TRAIL9 ADVENTURE BACKPACK
A compact dual-sport/adventure backpack the TRAIL9 has the perfect combination of a 4-litre waterproof roll-top main body and a separate 5-litre zip-access hydration compartment, with the choice of three compatible hydration reservoir sizes available (sold separately).
FEATURES
QUADLOC-Lite™ Harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort, even with heavy loads.
Ultra-durable 420D Cordura® Lite Plus and Hypalon construction.
External Hypalon net with elastic cord adds useful extra storage.
Removable waist strap for extra pack stability when riding.
Reflective panels on the harness give added visibility.
Harness pocket compatible.
Formed-web carry handle
Available in Black, Lime or Orange
10 YEAR GUARANTEE
DIMENSIONS: 400(h) x 210(w) x 130(d)mm / 15.7(h) x 8.26(w) x 5.1(d)ins
VOLUME: 9-litres (550cu in) total capacity.
WEIGHT: 1030g / 36oz
KRIEGA TRAIL18 ADVENTURE BACKPACK
KRUT18-O orange
Regular price
$239.00
Save $-239.00
TRAIL18 ADVENTURE BACKPACK
All-weather adventure touring demands robust, reliable equipment. The TRAIL18 Adventure Backpack utilizes Kriega’s groundbreaking Quadloc-Lite™ harness, combined with high-tech construction materials to meet the needs of the adventure rider.
Composed of three sections: A heavy-duty zip access 7-litre rear compartment which is a perfect storage area for a Tool-Roll and water bottle or the optional 3.75L Hydration Reservoir. This area also has a small internal waterproof pocket for a phone and wallet, combined with the main roll-top body providing a total of 12-litres 100% waterproof storage. The innovative Hypalon net also provides more external storage for wet gear.
FEATURES
QUADLOC-Lite™ harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort, even with heavy loads.
Ultra-durable 420D Cordura® Lite Plus and Hypalon construction.
External Hypalon net with elastic cord adds useful extra storage.
Removable waist strap for extra pack stability when riding.
Reflective panels on the harness give added visibility.
Harness pocket compatible.
Semi-rigid carry handle
Available in Black, Lime or Orange
10 YEAR GUARANTEE
DIMENSIONS: 445(h) x 250(w) x 170(d)mm / 17.5”(h) x 9.8”(w) x 6.7”(d)
VOLUME: 18-Litres (1100cu in) total capacity
WEIGHT: 1630g / 57oz
SRC Staff Crew Neck T-Shirts
DM130L-SRCSS-M-M-BLK
Regular price
$25.00
Save $-25.00
Congratulations, you found our shirts!
We made these logo t-shirts for our staff and based on requests for SRC apparel, we thought customers might like them too. You can even tell people you are employed here but, if you show up wearing one at BackFire Station we might give you a nametag and put you to work.
Perfect weight, wrinkle-free, ring spun soft fabric great for casual wear and comfortable under your gear while riding, wrenching, or doing all the above.
Available in white or black. Sizing listed below.
4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
1x1 rib knit neck
Tear-away label
Shoulder to shoulder taping
Men's sizes (chest size):
M 38-40"
L 41-43"
XL 44-46"
XXL 47-49
Women's sizes (chest size):
S 25-26"
M 37-38"
L 39-41"
XL 42-44"
XXL 45-47
Care Instructions
Machine wash cold with like colors. Only non-chlorine bleach. Tumble dry low. Warm iron if necessary
Side Rack Upgrade Set 2015-2024 CRF 300L & Rally models
H-CRF300-04-02-SET-UG-1
Regular price
$225.00
Save $-225.00
If you already have the SRC Tail rack (not compatible with other racks) you can upgrade at any time to the full system* with this easy to bolt-on kit. Works with both SRC steel and aluminum tail rack versions.
Kit contains a left and right pannier rack, rear cross brace, and attachment hardware. (the items in the red square boxes in the first image)
NOTE: We recommend using blue thread locker on the fasteners.
*Complete rack or gas can is not included in this side rack upgrade. They are shown for reference only and available in the Racks and Luggage section of our website.
Fits 2015-2024 CRF 300L & Rally models
Not compatible with Yoshimura exhaust systems that use an angled outlet tip as it may cause issues with melting soft luggage unless a heat shield is installed.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA R-20 Back Pack
KRU20
Regular price
$179.00
Save $-179.00
THE VERSATILE ‘ACTIVE’ PACK FOR ROAD AND TRAIL
We love our R20's, they have a nice body-hugging contoured design that looks sharp and feel great. And the Quad-Loc harness system does a great job of distributing the load taking the stress off your shoulders that is so common on conventional backpack designs. It's the perfect size for day trips or for an extra 20L of storage on your longer adventures. Although KRIEGA doesn't describe it as waterproof, we've never had any issues of our gear getting wet while riding in the rainy winters up here in the NW.
The Kriega R20 motorcycle backpack is an ‘active’ riding pack with Kriega's unique QUADLOC-lite harness system. The harness is angled away from underarms for total freedom of movement and is exceptionally easy to use with none of the harness re-adjustment necessary on conventional riding/hiking packs.
The size adjustable harness allows the backpack position to be moved up or down to produce the best possible fit. The Kriega R20 can be worn with or without a waist strap. The waist strap is not really necessary for street riding
FEATURES
The R20 incorporates a side pocket with water-resistant YKK® zip, along with an inner sleeve pocket and a key clip in the large main compartment. The pack is compatible with a CE-Level 2 back protector and hydration reservoir.
Designed and built with the highest quality materials, only Kriega offers an ergonomically perfect luggage solution that’s simple to use even in the thickest gloves, yet fully customizable to suit the most demanding of motorcyclists.
TECH-SPECS
Main compartment with YKK water-resistant zip
Side access pocket with YKK water-resistant zip
Internal hydration sleeve with compression
Internal zipped mesh-pocket
SUPERSPACE: 5mm airspace back.
YKK water-resistant zips
HYPALON: Abrasion resistant re-enforcement
Scholler Dynatech With integrated 3M Scotchlite
420 D nylon RipStop: lightweight yet extremely strong
3M Scotchlite: reflective logo
Unique QUADLOC harness: adjustable back length and total arm freedom
The Roland Sands Design X Kriega Roam Handlebar Bag is ideally suited for cruiser bikes with drag bar or t-bars with high risers, whilst the Velcro® Molle mounting system also enables a variety of other mounting options. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough hypalon reinforcement to give a classic look with modern technical twist. The main compartment is a roll-top waterproof Drypack, ideal for storing keep dry essentials. A quick access front pocket with dividers and key clip, keep small items to hand. An optional smartphone pocket can be mounted landscape or portrait for navigation with a touch-sensitive TPR screen cover or reverse mounted for easy access phone storage. Available in 2 color options: Black or Ranger.
Features:
• RSD heavy-duty waxed cotton and 1000D Cordura® construction
• Waterproof roll-top main body
• YKK® zip pocket with elastic inner dividers + quick-release key clip
• Removable smartphone pocket. Landscape or portrait mount
• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps
• 10 YEAR GUARANTEE
Volume 3-Litres (183 cu in) capacity
Weight - 485g /17oz
Kriega Roam Tool Tube
RSDRKTR-BB
Regular price
$129.00
Save $-129.00
ROAM TOOL ROLL
The Roland Sands Design X Kriega Roam Tool Roll is an indispensable piece of kit on any road trip. Store in your luggage or mount to the bike with the Velcro® Molle system, it’s a haven for your tools and spares. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough Hypalon reinforcement, the blend of Classic and Modern materials with a technical twist. Unclip and roll-out to reveal four YKK® zip access pockets, 10 elastic loops, and a T6 alloy rail with 8 x 3/8" clips for socket management. Additional 1/4” and 1/2” socket rails can also be added. (sold separately)
Available in 2 color options: Black or Ranger.
Features:
• RSD waxed cotton and 1000D Cordura® construction
• 4 x 1-litre pockets with oversized YKK zips.
• 10 x elastic loops
• 6061-T6 alloy socket rail with 8 x 3/8" clips
• Optional 1/4" and 1/2" socket rails
• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps
• Heavy-duty carry handle with grip fabric
• 10 YEAR GUARANTEE
Volume 4-Litres (244 cu in) capacity
Weight - 600g/21oz
Steel Core Straps
SSB-4.5
Regular price
$34.00
Save $-34.00
STEELCORE STRAPS
Love it • Lock It
Theft Resistant: Steelcore straps are ideal for securing your assets, including bikes, motorcycles, surfboard, coolers, sporting goods, tools and many more.
Quality: Steelcore straps have a braided 7/19 galvanized steel cable at the center covered in a cut-resistant, heavy-weight webbing made of a proprietary blend of steel and fibers. The Straps have an aircraft grade aluminum buckle assembly that is powder coated for corrosion resistance. Our locks are custom-made using double butted key and pick-resistant design.
Innovation: Steelcore is committed to being on the cutting edge of innovation and product development. We will continue to explore opportunities to improve our products and create value for our customers.
Eagle Grit Hand Cleaner - 12 ounces
NB16
Regular price
$8.95
Save $-8.95
Work Hard. Clean Up Right. American Made.
Eagle Grit's industrial-strength hand cleaner starts with their micro-scrubbing formulas, created from scratch through their very own recipes. Then mass-produced in their warehouse, each batch is sent over to their distribution center in drums where each bottle is hand-pumped, labeled and packed. Case by case, day by day, truck by truck, Eagle Grit's passion-filled product makes its way down the roads like veins to the heart of the land.
All Natural:
Detergent based formula - no solvents or pumice.
Drain friendly product and recyclable container!
The Grit:
Removes virtually all substances, kills odor, moisturizes and repairs all without irritation.
Kriega OS-Base Honda CRF300L / Rally
KOSBA-F
Regular price
$179.00
Save $-179.00
OS-BASE HONDA CRF300L / 300 RALLY
Designed to be a perfect fit on the HONDA CRF300L & CRF300 RALLY with a custom shape and specific fitting hardware. The OS-BASE CRF300 is an 'over the seat harness' for mounting OS-6, OS-12, or OS-18 ADVENTURE PACKS as soft panniers, with no need for metal frames or racks. This system provides a super-tough, lightweight carrying solution, with no drilling or permanent bodywork alterations needed. The fitting hardware gives the flexibility to mount a one, two, or three-pack set-up, depending on your ride. The set-length straps make mounting quick & easy, and the custom shape provides a tight, secure fit with plenty of distance from the exhaust. Less than a minute to mount and just seconds to remove it.
FEATURES • Carrying capacity from 12 to 54 Litres with center pack mounting option. • Heavy-duty Hypalon construction. • Quick & easy to put on/take off. • Reinforced stitching on all stress points. • Aircraft grade alloy hooks. • Non-slip cam buckles. • Includes 2 x T7 Strap Mounts • Includes 4 x T7 Bolt-on Loops • 10 YEAR GUARANTEE
WEIGHT - OS-BASE & Fitting Kit 800g / 1.7lb
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
FEATURES • Carrying capacity from 12 to 54 Litres with centre pack mounting option. • Heavy-duty Hypalon construction. • Quick & easy to put on/take off. • Reinforced stitching on all stress points. • Aircraft grade alloy hooks. • Non-slip cam buckles. • Includes fitting kit • 10 YEAR GUARANTEE
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.