Himalayan Overstock

Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light!  Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.

Available in your choice of satin black powder coat laser cut 14 gauge steel or natural brushed stainless steel finish.   

The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools! 

Easily installed in just a few minutes with a Phillips screwdriver. 

PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole.  (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)

Product instructions located here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Heavy-Duty Auxillary Fuel/Jerry Can Kits for HIMALAYAN 

2017-2021 models 

Purchase our pre-assembled kit and save $16 off of the individual parts cost!

The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100  miles range with SRC Auxiliary fuel can kits! 

The SRC auxiliary fuel can bolts on using existing mounting points on the HIMALAYAN upper front cargo racks.  Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service.  Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing. 

Please Note: Unlike competitor's kits, this kit is fully assembled and ready to install. We also apply a heavy-duty EPDM foam seating surface to prevent vibration and improve the functionality of the retention system. 

Kit includes: 

• 1 Himalayan-specific bracket (Select left or right side when ordering) 
• 1- 3L (.8 gal) gas can with integrated spout and quick-release mount  

Order 2 kits and install one on each side of the bike for 6 liters (1.6 gallons) of extra fuel!

MOTO STUFF Fuel cans are 10" tall, 8" wide, and 5" deep.  A flexible spout is stored under the main cap. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fuel/Jerry Can Mounting Bracket for Royal Enfield Himalayan

The 2017-2021 brackets are on overstock discount

(Bracket kit only, no tanks included)

2022-23 model ETA May 10th 2023 

The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100 miles range with SRC Auxiliary fuel can mounts.  Pre-drilled for easy installation of our 3L fuel cans with mounts, available on our site. 

**NOTE: The base plate is large enough to accommodate the ROTOPAX 2-1/2"  mounting plate bolt pattern but you'll need to drill them yourself.  

The SRC auxiliary fuel can Brackets bolt on using existing mounting points on the HIMALAYAN upper front cargo racks.  Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service.  Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing.

This product includes: Himalayan specific bracket,  (select left or right side when ordering) 

**The full bracket with Fuel/Jerry Can kits are also available on our site.

Product instructions are available here

Available for 2016 to 2023 Royal Enfield Himalayan models

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Protect the vulnerable header downpipe from road debris, rocks, and tip-over impacts with the SRC Header Pipe guard.

2-year ranges are available:

• Fits 2016-2021 ROYAL ENFIELD HIMALAYAN/SCRAM 411 (Pre Catalytic Converter models)
• Fits 2022-2023 ROYAL ENFIELD HIMALAYAN/SCRAM 411 (Models with Catalytic Converter

Made of 2mm stainless steel sheet and held securely in place with low profile stainless steel band clamps.  Easily installed in just a few minutes with common hand tools and provides years of protection.

Available in both Stainless Steel and Satin Black Powder Coat options.

Product instructions are available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SPECIAL for 2017-2021 Himalayan tail racks LIMITED to STOCK on HAND This is the top rack plate that bolts to the stock tail rack. 

The newly designed 2022-2023 kit fits the Himalayan and the SCRAM 411 and features an all-new beefy 1" diameter frame structure that completely eliminates the failure-prone stock rack frame.  It also incorporates small side wings (approximately 6" tall by 10" long) to help keep soft luggage out of the tire/wheel area.  The new 2022-2023 rack kit is not compatible with the Royal Enfield Pannier Racks. 

Top rack is made of a strong 3mm aluminum alloy plate for an optimal balance of strength to weight.

Rack plate dimensions:

Approximately 10" long, 11" wide at the front, tapering to 8" at the rear.  

Available in satin black powder coat or clear anodized natural silver to prevent oxidation. Designed for use with the stock rear tail rack and is also compatible with the Royal Enfield accessory side Pannier rack.  

NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is No longer available

Product instructions are available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Heavy-duty satin black powder-coated 3mm (1/8") thick steel skid plate for the mighty Royal Enfield Himalayan!  (fits 2017-2022)  Replace the original pop can plate with this burly rock crusher for a lifetime of protection of the sensitive undercarriage of your Himalayan.  Easily installed in about an hour with common hand tools and no modifications required. Installs using the stock skid plate mounting points. 

Compatible with our SRC Crash bars . (We have gotten customer feedback that the Delkevic exhaust system and Zana crash bars are not compatible with the skid plate. )  The satin black powder coat can be easily touched up with readily available satin black spray paint if you happen to scratch it while gallivanting through the outback! 

Original design by Jessie Kimball of the Royal Enfield Himalayan owners group, Jessie was nice enough to provide us with rights to produce and sell his very clean and robust design. Thanks Jessie! 

 Below is a step by step installation video. (The skid plate install is about 3/4 of the way through the video). 

Heavy-Duty Auxillary Fuel/Jerry Can Kits for HIMALAYAN 

2012-2023 models

Purchase our pre-assembled kit and save $16 off of the individual parts cost!

The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100  miles range with SRC Auxiliary fuel can kits! 

The SRC auxiliary fuel can bolts on using existing mounting points on the HIMALAYAN upper front cargo racks.  Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service.  Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing. 

Kit includes: 

• 1 Himalayan-specific bracket (Select left or right side when ordering) 
• 1- 3L (.8 gal) gas can with integrated spout and quick-release mount and bracket.   

Order 2 kits and install one on each side of the bike for 6 liters (1.6 gallons) of extra fuel!

MOTO STUFF Fuel cans are 10" tall, 8" wide, and 5" deep.  A flexible spout is stored under the main cap. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.