NOTE: These are special order products. If the part you want is shown in stock, it will ship right away. However, if the part is out of stock (0 quantity), lead times are generally 4 to 6 weeks. For special order parts, please place your order and we will follow up with the current estimated delivery time.
2020-2025 Full kit in Stainless Steel Silver is on overstock Sale
Save $100!
SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2025*
2020-2021 full and lower kits are compatible with SRC skid plate.
*2022-2025 models, you can not use the SRC V2 skid plate and lower crash bars.
PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine.
Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022. If you are unsure of how to order, shoot us an email for assistance.
Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit
Available Electropolished Stainless Steel (SILVER)or Satin Black Powder Coat steel
Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
Compatible with the stock skid plate and most aftermarket skid plates
Choose between:
Full set (Upper and lower crash bars)
Upper crash bars only (Lower crash bar can be added later to complete full set)
Lower crash bars only (Upper crash bar can be added to complete full set)
Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars. This is not rust and is perfectly normal.Product installation instructions can be found here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Available in brushed stainless steel or satin black powder coat finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Frame Guard (LEFT) - Yamaha Ténéré 700 (D)
Y-T700-20-01-SL
Regular price
$48.00
Sale price
$16.00
Save $32.00
CLOSEOUT SALE!
Black has sold out.
SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2025
Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel.
Crafted out of 2 mm thick aircraft fuselage grade stainless steel
Laser-cut, CNC bent on state-of-the-art machines
Easy 5-minute install using the stock fasteners and common hand tools
Available in natural silver stainless finish or black powder-coated
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowering Link YAMAHA TÉNÉRÉ 700 (D)
T700-2
Regular price
$119.00
Sale price
$75.00
Save $44.00
CLOSEOUT SALE!
Fits: 2021-2025 Yamaha TÉNÉRÉ 700.
T700-2 will lower the rear 1 inch
T700-3 will lower the rear 1.50 inches.
Reinforced for added strength/durability when adding weight.
Built in Boise, IDAHO. Ridden and raced everywhere.
Replaces Yamaha part # BW3-2217M-00-00
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protective Aluminum Skid Plate/Lower Engine Sump Guard - Yamaha Ténéré 700 V1 standard version (D)
Y-T7-V1-09-01-AL
Regular price
$368.00
Sale price
$188.00
Save $180.00
CLOSEOUT SALE!
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow. Standard protection version. We also offer an upgraded V2 version with left and right wing extensions that provide added protection for the waterpump and hoses on the right side and the ignition cover on the left side. It's available here on the website.
Fits Yamaha Ténéré 700 years 2022-2024 (and all Euro 5 exhaust models)
This skid plate is compatible with SRC lower crash bars.
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed aluminum steel or satin black powder-coat aluminum
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Does not fit 2022-2023 or models equipped with E5 catalytic converter
Protect your Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed stainless steel or satin black powder-coat
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Regular price
$448.00
Sale price
$218.00
Save $230.00
CLOSEOUT SALE! Save over $200
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow and this V2 version offers left and right wing extensions compared to our standard model. The wings are visible in the photos and provide extra protection for the left side ignition cover and the right side water pipe and hoses.
PLEASE NOTE! This skid plate is not compatible with most lower crash bars, including SRC lower crash bars. That being said, the wing extensions do a good job of protecting the lower portions of the engine though.
Fits Yamaha Ténéré 700 years 2022-2025 and all Euro 5 exhaust models
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for the removal of skid plate
Available in natural brushed aluminum or Satin black powder coat made of a burly 4mm thick aluminum alloy.
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega OS-Base Yamaha Ténéré 700 (D)
KOSBA-D
Regular price
$179.00
Sale price
$128.00
Save $51.00
CLOSEOUT SALE!
OS-BASE YAMAHA TENERE 700
A new larger version of the popular OS-BASE that is specifically designed to fit the YAMAHA TENERE 700.
The OS-BASE is an 'over the seat harness' which allows OS-6, OS-12, or OS-18 ADVENTURE PACKS to be mounted as soft panniers. No additional frames are required, this system provides a super-tough, lightweight carrying solution for the Yamaha Tenere 700 with no drilling or permanent bodywork alterations to the bike.
The modular design enables you to modify the luggage set-up to suit your ride - from a day’s single track to longer moto-camping adventure trips.
The TENERE BOLT-ON LOOPS included, attach to the bike’s subframe under the seat and provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand-alone tail pack without the OS-BASE.
The set length straps make mounting a breeze and the purpose-designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it.
FEATURES • Carrying capacity from 12 to 54 Litres with center pack mounting option. • Heavy-duty Hypalon construction. • Quick & easy to put on/take off. • Reinforced stitching on all stress points. • Aircraft grade alloy hooks. • Non-slip cam buckles. • Includes 2 x T7 Strap Mounts • Includes 4 x T7 Bolt-on Loops • 10 YEAR GUARANTEE
WEIGHT - OS-BASE & Fitting Kit 800g / 1.7lb
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Head Light Guard Yamaha FJ-09 (D)
Y-FJ09-01-01-SL (D)
Regular price
$161.00
Sale price
$68.00
Save $93.00
Available in Brushed Stainless Steel finish or Satin Black Powder coat steel
Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens
Developed for on or off-road use
Includes all necessary mounting hardware and is easily installed with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
