R-HM18-01-02
CLOSEOUT SALE!
Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light! Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.
Available in your choice of satin black powder coat laser cut 14 gauge steel or natural brushed stainless steel finish.
The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools!
Easily installed in just a few minutes with a Phillips screwdriver.
PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole. (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)
Product instructions located here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Mounting Bracket Kit for Fuel/Jerry Can - Royal Enfield Himalaya
R-HM18-27-02-R
CLOSEOUT SALE!
Fuel/Jerry Can Mounting Bracket for Royal Enfield Himalayan
(Bracket kit only, no tanks included)
The generous 4-gallon tank on the HIMILAYAN provides a range of about 250 miles. Add up to another 100 miles range with SRC Auxiliary fuel can mounts. Pre-drilled for easy installation of our 3L fuel cans with mounts, available on our site.
**NOTE: The base plate is large enough to accommodate the ROTOPAX 2-1/2" mounting plate bolt pattern but you'll need to drill them yourself.
The SRC auxiliary fuel can Brackets bolt on using existing mounting points on the HIMALAYAN upper front cargo racks. Rugged 2 mm thick powder-coated steel brackets have lower and upper support points to provide years of safe and secure service. Unlike other mounts on the market that only mount at the top and are prone to stress cracking from repeated flexing.
This product includes: Himalayan specific bracket, (select left or right side when ordering)
**The full bracket with Fuel/Jerry Can kits are also available on our site.
Product instructions are available here
Available for 2016 to 2021 Royal Enfield Himalayan models
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Rack ROYAL ENFIELD HIMALAYAN & SCRAM 411 (D)
R-HM22-V2-04-01-AL
CLOSEOUT SALE!
For 2017-2021, the top rack is just a top plate that bolts to the existing rack frame. The black version has sold out.
The newly designed rack for 2022-2023 Himalayan and the 2022-2025 SCRAM 411 and features an all-new beefy 1" diameter frame structure that completely eliminates the failure-prone stock rack frame. It also incorporates small side wings (approximately 6" tall by 10" long) to help keep soft luggage out of the tire/wheel area. The new 2022-2023 rack kit is not compatible with the Royal Enfield Pannier Racks.
Top rack is made of a strong 3mm aluminum alloy plate for an optimal balance of strength to weight.
Rack plate dimensions:
Approximately 10" long, 11" wide at the front, tapering to 8" at the rear.
Available in satin black powder coat or clear anodized natural silver to prevent oxidation. Designed for use with the stock rear tail rack and is also compatible with the Royal Enfield accessory side Pannier rack.
NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is No longer available
Product instructions are available here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Exhaust head pipe guard ROYAL ENFIELD HIMALAYAN (D)
R-HM18-05-01-AL (D)
CLOSEOUT SALE! (black has sold out)
Protect the vulnerable header downpipe from road debris, rocks, and tip-over impacts with the SRC Header Pipe guard.
Made of 2mm stainless steel sheet and held securely in place with low profile stainless steel band clamps. Easily installed in just a few minutes with common hand tools and provides years of protection.
Available in both Stainless Steel and Satin Black Powder Coat options.
Product instructions are available here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Kriega Overlander OS-6 ADVENTURE PACK
KOS6
OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.
The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.
Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.
A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.
• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops
The four Integrated loops on the base of each pack are designed to:
An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)
DIMENSIONS
CAPACITY: 6 Litres - 366 cu in
WEIGHT: 550g - 19.4 oz