H-CRF450RL-04-02-AL
SRC Designs Full Rack System for the 2021-2024 Honda CRF 450 L & RL
Top rack surface dimensions are roughly 14” long and 9’ wide at the front, tapering to 8” at the rear.
Side racks add other 12” X 6” top surface making the full rack top surface roughly 14” X 20”
Side rack dims are approximately 12” X 8”
This is the Adventure Rack System you want!
Innovative modular design made of high-strength lightweight aluminum alloy
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System features:
Fitment includes:
Available add-ons include (See our site):
Please Note: The CRF 300L/Rally specifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration.
Product Instructions available here NOTE: We recommend using blue thread locker on the fasteners.
Product installation video available here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Hardware Included in add on accessory adapter kit*
Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO
Eagle Grit Hand Cleaner - 12 ounces
NB16
Kriega Subframe Loop Straps
KASLB4
Get an extra set so you can quickly move your US Drypacsk to another bike etc.
Simply thread around the bike subframe and back through the buckle.
4 x 500mm (20") lengths of webbing with loop and buckle at one end.
NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit.
WEIGHT
50g
12 Volt Socket USB Adapter
MS-USB adapter
12 Volt Socket USB Adapter- For your convenience, We've sourced a rugged Dual USB high output (2.10 quick charger circuitry) charger with aluminum housing for use with the 12 Volt socket kit- Available on the electrical accessories section of our site. It does not fit flush to the socket housing, so it keeps the cover about 3/4 of the way open, which provides easy access to the lower port as well as providing some protection against light rain/water exposure.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA US-DRYPACK HOOK STRAP (Single)
KAMBS1S
The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.
SRC Replacement Crash Bar Pads
P-PK-01-01
SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over. If you do happen to scratch one up, you can easily remove it and install a freshie!
These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter.
Please Note: These are not solid frame sliders. Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.
Price is per replacement pad. (order 1 pad, get 1 pad)
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.