SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2020 - 2026

The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  This rack also includes stainless steel support brackets and is rated for up to 22 lbs  (10 Kg) of gear. 

Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1  top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics. 

This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.

Pre-drilled for our 3L fuel can mount

Available in Satin Black powder coat

Fitment:

• Yamaha Ténéré 700 years 2020 - 2026
• • Black powder-coated 3.25mm aluminium top plate
    
  • 25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution.  Plus acts as much much-needed grab handle!
  • Fits to 4 x existing mounting points on rear of bike
  • Supplied with 4 x stainless steel standoffs to replace existing OEM units 
  • Includes all stainless steel mounting bolts & counter-sunk washers
  • Flat section of the rack sits  approximately 10mm above the passenger seat (standard OEM seat)
  • Slotted all around to cater for plenty of tie-down points
  • Pre-drilled to fit SRC 3 liter plastic fuel tank
  • Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
  • Quick & easy fitment
    
  
  

Installation instructions and video

* Note: When shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

• Detergent based formula - no solvents or pumice.
• Drain friendly product and recyclable container!

• Removes virtually all substances, kills odor, moisturizes and repairs all without irritation.

Made specifically for 2019 to 2026 Yamaha Tenere 700

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha 2025-2026 Ténéré 700 added cutouts for more airflow. Standard protection version. 

Fits Yamaha Ténéré 700 years 2025+ (and all Euro 5 exhaust models)

This skid plate is compatible with SRC lower crash bars. 

Protect your  T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy-gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed aluminum or satin black powder-coat aluminum

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE / 50% off!

OS-PLATFORM - YAMAHA TÉNÉRÉ 700

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Brake Master Cylinder Guard Yamaha T7 

Fits: 2020 -2026 Yamaha Tenere T7

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Easy install with common hand tools.  

Available in natural stainless finish or satin black powder coat. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.