Full kit install PDF 

Protect your Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated aluminum skid plate for HONDA's all-new Transalp XR750. 

Fits 2023-2025 Models 

The 2026 E-clutch model does require a new design to clear the 1" wider clutch cover.  The 2026 kit is a top priority, and we are hopeful it will be available this November We have opened the kit up undera  pre order status at the same price as the earlier kit. When it arrives, it will most likely be a bit more expenive. 

Here is why you need to install protection now!   That is

the 

oil pan 

and exhaust in the red circle in the pic below.

 

 

 

 

 

 

 

Upper Crash Bars installation:  Printed Version 

Lower Crash Bar & Skidplate Installation:  Printed Version 

The steel tube with integrated aluminum skid plate design is lighter (just under 24 lbs) and stronger than conventional two-piece designs. 

• Full crash bars plus 4mm thick integrated aluminum skid plate - sold as a set

• Crash bars made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender

• Skid plate and crash bar design allows for oil change and filter replacement without removal and is compatible with the OEM and aftermarket center stands. 

• Crash bars also incorporate a 4mm (3/16") aluminum skid plate to protect the vulnerable cast aluminum oil pan which hangs dangerously below the engine and is pretty much the lowest part of the bike!

• 4 x Main mounting points on each side of the bike for maximum strength

• Beautiful hand-laid TIG welds! 

• Available in black powder-coated and electropolished satin silver stainless steel

• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are 

• easily replaced if they are damaged in a tip-over

• Supplied with all stainless steel brackets & mounting hardware

• Easy to assemble, convenient and fast.

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Lower Crash Bar with Integrated Skid Plate 2023-2025* Honda TRANSALP

* (2026 E-Clutch kit ETA December) 

We also have the full set (skid plate with lower and upper crash bars) available here.

Protect your 

Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated skid plate for HONDA's all-new Transalp XR750.  

Lower Crash Bar & skidplate installation:  Printed Version 

The integrated design is lighter (just under 14 lbs) and stronger than conventional two-piece designs. 

• Low crash bars plus integrated skid plate - sold as a set

• Crash bars made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender and the skid pate is 4mm laser cut and TIG-welded aluminum. 

• Skid plate and crash bar design allows for oil change and filter replacement without removal. 

• 1" steel crash bars also incorporate a 4mm (3/16") aluminum skid plate to protect the vulnerable cast aluminum oil pan which hangs dangerously below the engine and is pretty much the lowest part of the bike!

• 4 x Main mounting points on each side of the bike for maximum strength

• Beautiful hand-laid TIG welds! 

• Available in black powder-coated and electropolished satin silver stainless steel

• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are 

• easily replaced if they are damaged in a tip-over

• Supplied with all stainless steel brackets & mounting hardware

• Easy to assemble, convenient and fast. 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Cargo Tail Rack HONDA TRANSALP

Fits 2023-2025 HONDA TRANSALP

Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your HONDA TRANSALP.

No drilling or modifications required, easily mounts in under an hour with common hand tools. 

Installation instructions  PDF

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made specifically for 2023-2025 Honda TRANSALP

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

7/8" / 22mm GPS Phone BAR FOR HONDA TRANSALP, HONDA NX500 & Royal Enfield Himalayan 450 

Fits:

2023-20256 HONDA TRANSALP

2021-20256 HONDA ADV 150 / 160

2024-2026  HONDA NX500

2017-2023 ROYAL ENFIELD HIMALAYAN 411

2024-2026  ROYAL ENFIELD HIMALAYAN 450

Universal ( see specs) 

...............................................................................................
1. Includes the mounting brackets made from 2 mm Stainless Steel sheet for improved Corrosion resistance properties and Laser cut and CNC Bent on State-of-the-art machines
2. The GPS Bar, is made out of Stainless Steel Bar stock 22mm diameter (7/8") with Welded End Adaptors and Compatible Hardware
3. The Surface is Electro polished to improve its aesthetic appearance and removal of scratches
4. Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site
5. Fits all HONDA TRANSALP's, HONDA ADV 150's, HONDA NX500's & Royal Enfield Himalayan 450